Buffalo TS4400D Manual

Buffalo Server TS4400D

Læs gratis den danske manual til Buffalo TS4400D (4 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Buffalo TS4400D, eller vil du spørge andre brugere om produktet?

Side 1/4
The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned
HDDs for the setup process. Use either new HDD(s) or delete all partitions (and
therefore all data) with a partition editor before you start with existing HDD(s).
Step by step
1. Mount one or more HDDs to a frame and insert it in the TeraStation.
2. Prepare the MicroSD and the USB adapter and insert the USB
adapter into a USB 2.0 port, connect power and network.
3. Move the boot switch to USB position.
4. Boot the TeraStation.
Now the unit gives after some minutes a tone, the display
goes red and it says “push function button to start”.
5. Push the function button until beep sounds.
The display status color will be blue and sequence through these messages:
Recovery Preparing
System Recovering
FW/Updating
Recovery Finished, “Change Boot SW
Setup Guide
TeraStation 4000
www.buffalo-technology.com


Produkt Specifikationer

Mærke: Buffalo
Kategori: Server
Model: TS4400D

Har du brug for hjælp?

Hvis du har brug for hjælp til Buffalo TS4400D stil et spørgsmål nedenfor, og andre brugere vil svare dig