Burg Wächter PS 7215 Manual

Burg Wächter Måleudstyr PS 7215

Læs gratis den danske manual til Burg Wächter PS 7215 (3 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Burg Wächter PS 7215, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

PRECISE PS 7215

PRECISE

BURG-WÄCHTER KG

Altenhofer Weg 15

58300 Wetter

Germany

ProﬁScale PRECISE

Digital caliper

Operating instructions

ZERO

ABS

inch

150 mm

BA PRECISE 06 / 2015

www.burg.biz

ProﬁScale PRECISE PS 7220 2

EXTRA

1,5 V

C D

Introduction

The PRECISE PS 7215 digital callipers will simplify numerous domestic and

industrial tasks.

The ProﬁScale PRECISE digital callipers offer a convenient and easy way of

measuring the ﬁnest distances and diameters. The digital display shows the

results in clearly legible form and with an accuracy of 0.01 mm. Readings

can also be displayed in inches.

Please read the operating instructions fully and keep them in a safe place.

Illustration

Inch/millimetre switching (inch/millimetre toggle button)

ORIGIN button

ON / OFF button

Zero setting button (ZERO / ABS)

Battery cover

Safety instructions

Failure to observe the following instructions

may result in personal injury:

1. Before using the device, you must read these instructions carefully to

ensure that you operate the device safely. Keep these instructions in a

safe place.

2. Keep the device away from children and unauthorized persons.

3. For safety reasons and to maintain the warranty on the device, repairs

must only be carried out by qualiﬁed personnel using genuine parts.

4. Never expose the device to an electric voltage, as this could damage

the electronics.

5. Do not use the device in the vicinity of inﬂammable or explosive gases.

6. Do not use the device if it is defective.

7. Handle the device with care and do not drop it.

8. To avoid functional errors, do not dismantle the device.

9. Keep the device clean and dry.

10. When not in use, the device should be stored in the bag supplied.

11. Avoid contact with water and dust.

12. Do not use abrasive cleaners or solvents to clean the device. Use a

damp cloth and mild detergent.

13. Check the battery/batteries regularly to avoid damage.

14. Remove the battery if you are not going to use the device for a long

period.

Warranty

Congratulations!

Thank you for choosing ProﬁScale quality measuring technology by BURG-

WÄCHTER. BURG-WÄCHTER offers a warranty of 2 years’ duration from the

date of purchase. The warranty does not cover damage caused by improper

use, overloading the device or incorrect storage as well as normal wear and

defects that only have an insigniﬁcant effect on the value or usability of

the device. The warranty shall be immediately invalidated if unauthorized

persons work on the device. In the event that a warranty claim arises, please

hand over the entire device incl. packaging, description and batteries along

with the sales receipt to your dealer.

Technical data

Measuring accuracy

0.01 mm

Power supply

1.5 V button cell

Measurement speed

1.5 m / s

Operating temperature

0 to +40 °C

Relative air humidity

< 80 %

Storage temperature

–10 to 60 °C

Operating the device

Instructions

• Press the “ON / OFF” button to switch on the device.

• Press the “in/mm” button to select the required unit.

• Calibrate the callipers by pushing the two jaws together and pressing the

“ZERO / ABS” button.

ZERO / ABS button / ORIGIN button

• The “ZERO / ABS” button is for the relative zero point and for switching

between absolute and relative measurement. When switching on the

device, it is initially always in the absolute measurement mode.

• Press the “ZERO / ABS” button to switch to the relative measurement

mode.

• To return to the absolute measurement mode, you must push the two

jaws together again. Then press the “ZERO / ABS” button again. When

going from one mode to the other, the original zero position remains

unchanged.

• Exception: you press the “ORIGIN” button and the zero point set here is

retained even after you switch off the callipers.

Produkt Specifikationer

Mærke:	Burg Wächter
Kategori:	Måleudstyr
Model:	PS 7215

Har du brug for hjælp?

Hvis du har brug for hjælp til Burg Wächter PS 7215 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Burg Wächter Manualer

Burg Wächter PS 7215 Manual

6 December 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025