Byron SX38 Manual

Byron Dørklokke SX38

Læs gratis den danske manual til Byron SX38 (2 sider) i kategorien Dørklokke. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Byron SX38, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Byron No.SX38 Size: A4 Date: 11 Oct 2007

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

SX Range Bell Push SX-38

Push Button unit

Power: 1 x 3volt Lithium battery (CR2032– included)

Melody Selection

Press the melody selector once to select a melody as your door chime sound. There is a total of 8-melodies

for selection -

1) Tubular 3-notes

2) Big Ben

Additional Byron “SX” range products can be purchased for compatibility.

Digital Code Set Up

The Door Chime kit is equipped with an advanced random and self-learning operation coding ability

therefore no setting is needed. Read the following instructions before use.

1. First time operation:

After battery installation on the Push Button and Door Chime units, press the Push Button once and it will generate a

new operation code randomly and send a wireless signal to the Door Chime unit. The door chime unit will sound to

indicate that new operation code is registered and memorised.

2. Interference from a similar unit operating nearby:

a) Simply remove the batteries from the Push Button and Door Chime units and rest for 10 seconds, this will erase the

memory.

b) Insert the batteries into the Push Button and the Door Chime units, the door chime unit will give 2-beeps to indicate

that it is ready for the new code registration. Press the Push Button once, it will generate a new operation code

randomly and send a wireless signal to the Door Chime and it will sound to indicate that new operation code is

registered and memorised.

3. Front and back door Bell Push operation:

a) Remove the batteries from the Push Buttons (Front & Back Door) and Door Chime units and rest for 10 seconds,

this will erase the memory.

b) Insert the batteries into the Push Buttons and Door Chime units; the door chime unit will give 2-beeps to indicate

that it is ready for the new code registration.

c) Press the front door Push Button once, it will generate a new operation code randomly and send a wireless signal to

the door chime unit and it will sound to indicate that a new operation code is registered and memorised.

d) After, (within 2 minutes) press the back door Push Button once, it will generate a new operation code randomly and

send a wireless signal to the door chime unit and it will sound to indicate that new operation code is registered and

memorised. The door chime unit has the ability to memorise both operation codes.

e) Test to ensure correct operation before final installation.

Push Button

• Open up the push button by pushing in the tab at the

bottom of the push with a small flat screwdriver.

• Remove the isolation strip from the battery

compartment then it is ready to use.

• When replacing the battery, ensure the battery

polarity matches the internal markings (“+” facing

upwards), then press the battery down so that it is

sitting firmly in its compartment.

CR2032 3V

Lithium Battery

Remove

Isolation

Strip

1 2

Melody Selector

Melody Selection

• Press the melody selector once to select the melody

as door chime sound, total 8 melodies for selection:

1) Tubular 3-notes

2) Big Ben

3) Tubular 2-notes

4) Solo

Additional Byron “SX” range products can be

purchased for compatibility.

5) Tubular Scare

6) Clarinet

7) Saxophone

8) Morning Dew

Digital Code Set Up

• Press the Push Button once, a new operation code is

generated randomly and sent to the Door Chime unit.

• The Door Chime will sound to indicate that a new

operation code is registered and memorised.

3) Tubular 2-notes

4) Solo

5) Tubular Scare

6) Clarinet

7) Saxophone

8) Morning Dew

Push Button Installation

• Using the holes on the back of push button as a

template, mark the fixing position for the unit.

• Drill holes and fit wall plugs and secure the push

button unit to the wall with screws.

• Do not mount it on any metal surface or UPVC door

frame.

Important

1. Do not mount the Push Button close to fireplace or expose to high temperatures.

2. Do not expose the Push Button unit to moisture

3. Please dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant

legislation.

4. Make sure that no naked flame sources, such as lighted candles, should be placed on the unit.

5. The unit should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be

placed on the unit.

6. Replace only with the same or equivalent type of battery that is recommended by the manufacturer.CAUTION:

7. Make sure batteries are installed correctly as per internal markings.CAUTION:

8. Danger of explosion if battery is incorrectly installed or replaced.CAUTION:

9. IMPORTANT: There are no serviceable parts in the units, do not attempt to repair it.

Trouble Shooting & User Hints

In case of the door chime unit does not sound, please check the followings:

a) Flat batteries in either Push Button or Door Chime units - change the batteries.

b) Wrong battery polarity in either Push Button or Door Chime units - re-insert the batteries.

c) Push Button or Door Chime units are not on the same operation codes - re-set the code (see digital code set up).

d) Units are out of range - Operate the Chime unit within the operation range.

Specification

Operating Temperature: -10C - +40C

Selectable Tone: Total Eight (8) melodies available

Selectable Digital Code : Total two hundred fifty six (256) possible digital codes

“Type R2 Device - device where the sound output is created by the

initial operation of the control and where the period of sound

output continues for the designed duration irrespective of

condition of the control.”

Signal Sent Indicator Light

CH Byron Electrical Ltd

Byron House

34 Sherwood Rd, Astonfield

Bromsgrove, B60 3DR

Tel: 0845 2301231

e: support@chbyron.com

w: www.chbyron.com

Produkt Specifikationer

Mærke:	Byron
Kategori:	Dørklokke
Model:	SX38

Har du brug for hjælp?

Hvis du har brug for hjælp til Byron SX38 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Dørklokke Byron Manualer

Byron DBY-23412 Manual

4 August 2025

Byron DBY-23512 Manual

4 Oktober 2024

Byron B432E Manual

4 Oktober 2024

Byron 10.015.46 Manual

1 Oktober 2024

Byron DB304 Manual

23 September 2024

Byron DBY-24112 Manual

23 September 2024

Byron BY102 Manual

22 September 2024

Byron B411E Manual

22 September 2024

Byron 10.020.40 Manual

21 September 2024

Byron 10.020.06 Manual

10 September 2024

Dørklokke Manualer

Nyeste Dørklokke Manualer

Extel Carillo Manual

31 Oktober 2025

Elektrobock BZ11-21 bílá Manual

5 Oktober 2025

Nexa LMLR-710 Manual

3 Oktober 2025

Nexa MLR-1922 Manual

3 Oktober 2025

Blink Video Doorbell Manual

1 Oktober 2025

26 September 2025

26 September 2025

21 September 2025

21 September 2025

Heidemann 70027 Manual

14 September 2025