Canary Secure Mount Manual

Canary Ikke kategoriseret Secure Mount

Læs gratis den danske manual til Canary Secure Mount (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Canary Secure Mount, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation instructions

IMPORTANT: Before installing your Secure

Mount, complete setup of your Canary Flex™

device with the Canary® app, available from

canary.is/app on your iOS or Android device.

Step 1: Pick a place with a strong Wi-Fi

signal.

If you can stream live video from your

Canary Flex device from here without

interruption , you’re ready to install your

Secure Mount.

Step 2: Find the best view.

Temporarily hold your device in the desired

position and use the Watch Live feature in

the Canary app to confirm you have the

best view.

Position your device to eliminate as much

background activity as possible, such as

passing cars.

Step 3: Unscrew the baseplate from the

Secure Mount.

Using the provided hex tool, unscrew the

hex screw on the bottom of the base and

remove the baseplate.

Step 4: Install the baseplate.

Hold the baseplate against the installation

surface and use a pencil to make two marks

through the two holes in the back of the

baseplate.

On the pencil marks, drill two pilot holes into

the installation surface.

Note: If wall anchors are required for your

installation (drywall, brick, concrete), use

a 13/64” drill bit to drill pilot holes in the

installation surface.

If wall anchors are not required for your

installation (wood), use a 1/8” drill bit to drill

pilot holes in the installation surface.

Align the baseplate holes with the pilot

holes in the installation surface and install

the provided wall anchors (optional) and

Phillips screws.

Secure Mount

For Canary Flex™

Installation Guide

In the box

1 Secure Mount

1 baseplate

2 Phillips screws

2 wall anchors

1 hex screw

1 hex tool

What you’ll need

Drill

Phillips screwdriver

(Step 4 cont’d)

If you want to adjust the Secure Mount’s

level after fastening the baseplate to the

installation surface, loosen the right screw

and rotate the baseplate accordingly before

tightening.

Step 5: Hook the Secure Mount onto the

baseplate.

Align the top of the Secure Mount base with

the two hooks at the top of the baseplate,

then snap the bottom into place.

Step 6: Secure the base to the baseplate.

Using the provided hex tool, tighten the hex

screw on the bottom of the base.

Step 7: Install your Canary Flex device.

Insert your Canary Flex device into the

Secure Mount and adjust it to the preferred

angle. Make sure the LED ring is not covered

by the cup before securing.

Note: Do not twist your Canary Flex device

itself to secure it.

Use the provided hex tool to secure the

mounting screw to the bottom of your

device.

Step 8: Adjust the angle.

Adjust the angle of your Canary Flex device

by pressing the button on the top of the

Secure Mount and rotating the device until

it’s in the desired position.

Step 9: Connect to power. (optional)

If you plan to keep your Canary Flex device

plugged in, connect the power cable to the

back of your device and route the cable

around the secure mount in the direction of

your power outlet.

Note: Make sure you use a covered

weatherproof outlet if you plan to keep your

Canary Flex device plugged in outdoors.

Produkt Specifikationer

Mærke:	Canary
Kategori:	Ikke kategoriseret
Model:	Secure Mount

Har du brug for hjælp?

Hvis du har brug for hjælp til Canary Secure Mount stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Canary Manualer

Canary Secure Mount Manual

5 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vestil RR-65-40 Manual

1 Oktober 2025

Vestil EH-76-25 Manual

1 Oktober 2025

Schneider SCTK30 Manual

1 Oktober 2025

Vestil AHSN-4-15-12-VG Manual

1 Oktober 2025

Vestil EHLTP-3664-2-60-A3 Manual

1 Oktober 2025

Vestil AHSN-2-15-9-TLC Manual

1 Oktober 2025

Vestil AWR-G-28-12A Manual

1 Oktober 2025

Vestil AHS-8-20-16-VG Manual

1 Oktober 2025

Vestil EHLTP-3664-1-60-A1 Manual

1 Oktober 2025

Fisher & Paykel VB30SMB3 Manual

1 Oktober 2025