Canon CN-E14-35mm T1.7 L S Manual

Canon Linse CN-E14-35mm T1.7 L S

Læs gratis den danske manual til Canon CN-E14-35mm T1.7 L S (3 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Canon CN-E14-35mm T1.7 L S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

1/3

①

②

③

④

BACK FOCUS ADJUSMENT

NAMES OF PARTS

Focus drive gear

Zoom drive gear

Iris drive gear

Lens holder

F.B. Adjuster

PL mount

(FP type)

EF mount

(F type)

Attachment holder

1. Open the rubber cap of F.B. adjuster and loosen the

F.B. adjusting xing

screw (black) using the standard

screwdriver.

Select an object at an appropriate distance

Use any object with sharp contrast to facilitate the

adjustment work.

Set the iris fully open.

Set the lens to the telephoto angle by turning the zoom

ring.

Bring the object into focus by turning the focus ring.

Set the lens to the widest angle by turning the zoom ring.

Turn the F.B. adjusting screw (gold) with a standard

screwdriver to focus.

8. Repeat steps 4 to 7 a few times until the object is

brought into focus both at the widest end and the

telephoto end.

After the back focus adjustment is completed, tighten the

F.B. adjusting xing screw. Then close the rubber cap.

If the image formation plane of the lens and the focal plane of the camera are not aligned, the image will not be

in focus when zooming, resulting in out-of-focus images.

PL mount lenses are equipped with a LEMO 4-pin connector.

It connects to external devices that support Cookeʼs /i Technology.

①Lens body

②Lens cap

③Rear lens cap

④Attachment holder

⑤

Operation Manual

Before Using The Product

⑥

Operation Manual

Regulations

Make sure all of the following items are included in the packing box. If you nd any item missing, please

contact your dealer or Canon Inc.

F.B. Adjusting Screw (Gold)

F.B. Adjustment

Fixing Screw (Black)

F.B. Adjuster

LEMO 4-pin

Connector

CN-E20-50mm T2.4 L F

/ CN-E20-50mm T2.4 L FP

CN-E45-135mm T2.4 L F

/ CN-E45-135mm T2.4 L FP

CN-E14-35mm T1.7 L S

/ CN-E14-35mm T1.7 L SP

Digital Cinema Lens

Before using the product, make sure to read the "GENERAL SAFETY INFORMATION" and be sure to use the

product correctly.

This product comes with the following documents:

• Operation Manua

l "

Before Using The Product

(Included with the product)

• Operation Manual

Regulations

(Included with the product)

• Operation Manual (Web)

• Depth-of-eld (Web)

ENG OPERATION MANUAL

PRODUCT LIST

The illustrations in this manual show CN-E20-50mm T2.4 L F unless otherwise specied.

The shapes of product may vary depending on models and specications.

⑤

⑥

A variety of professional camera accessories are available using

15 mm and

19 mm rod adaptors.

(When using a

19 mm rod, attach the supplied attachment holder to the lens holder.)

1. Attach the lens to the camera tightly so that both mounting surfaces are

in complete contact.

2. Secure the attachment holder on the lens support using

the clamping screw supplied with the lens support.

3. Fix the lens support to the rods using lens support xing screws.

MOUNTING AND CONNECTING

Lens suppor

Note

For details on how to attach the lens, refer to the camera's

operation manual as well.

For PL mount, read the following instructions before mounting the lens.

The PL mount supports Cookeʼs /i Technology, so make sure that the camera is set to /i . “ ”

Do not mount the lens if the camera is set to a mount communication mode other than /i . Doing so “ ”

could result in malfunction.

Note

Before mounting the lens on the camera, make sure that the power of camera and the power of supply

equipment are turned o󰀨.

Be sure to use the lens holder when mounting the lens on a camera. Be sure to avoid applying

excessive weight to the lens mount when the lens is mounted on a lens support.

CN-E20-50mm T2.4 L F / CN-E20-50mm T2.4 L FP

：approx. 0.9-1.8 m,

6 ft

CN-E45-135mm T2.4 L F / CN-E45-135mm T2.4 L FP

：approx. 1.8-3.7 m,

12 ft

CN-E14-35mm T1.7 L S / CN-E14-35mm T1.7 L SP

：approx. 0.9-1.8 m,

6 ft

Rods

Screw supplied with

the lens support

Lens support

xing screws

Produkt Specifikationer

Mærke:	Canon
Kategori:	Linse
Model:	CN-E14-35mm T1.7 L S

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon CN-E14-35mm T1.7 L S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Linse Canon Manualer

Canon RF 75-300mm F4-5.6 Manual

8 November 2025

Canon KJ22ex7.6B II Manual

7 November 2025

Canon CN-E50mm T1.3 FP X Manual

5 November 2025

Canon RF 24-70mm f/2.8 L IS USM Manual

3 Oktober 2025

Canon J35ex15B4 Manual

7 September 2025

Canon CN-E20mm T1.5 L F Manual

1 September 2025

Canon RF 35mm F1.4 L VCM Manual

29 August 2025

Canon KJ20x8.2B KRSD Manual

26 August 2025

Canon CJ24ex7.5B Manual

25 August 2025

Canon CJ14ex4.3B Manual

25 August 2025

Linse Manualer

Nyeste Linse Manualer

Sigma Contemporary 12mm F1.4 DC Manual

12 November 2025

Angénieux Optimo Ultra Compact 21-56 Manual

10 November 2025

Tokina SZX 400mm f/8 Reflex MF Nikon Manual

7 November 2025

Tokina atx-m 23mm f/1.4 Manual

7 November 2025

Tokina AT-X M 33mm f/1.4 Manual

7 November 2025

Sony E 55-210mm F4.5-6.3 OSS Manual

6 November 2025

Irix 150mm f/2.8 Manual

6 November 2025

Irix 15mm T2.4 Manual

5 November 2025

Irix 150mm f/2.8 Dragonfly Macro 1:1 Manual

5 November 2025

Angénieux Optimo 19.5-94 Manual

5 November 2025