Canon EF-M 18-150mm f/3.5-6.3 IS STM Manual

Canon Linse EF-M 18-150mm f/3.5-6.3 IS STM

Læs gratis den danske manual til Canon EF-M 18-150mm f/3.5-6.3 IS STM (4 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 80 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 40.5 anmeldelser. Har du et spørgsmål om Canon EF-M 18-150mm f/3.5-6.3 IS STM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

ENG-1

❸

CT1-8615-000

❶

❷

❸

Wide end

Telephoto end

Zoom ring

ENG EF-M LENS Instructions

EF-M18-150mm f/3.5-6.3 IS STM

①

②

③

④⑤

⑥

⑦ ⑧

Nomenclature

① Focusing ring

② Hood mount

③ Filter mounting thread

④ Lens mount index

⑤ Contacts

⑥ Zoom position index

⑦ Zoom ring

⑧ Focal length indicator

Thank you for purchasing a Canon product.

The Canon EF-M18-150mm f/3.5-6.3 IS STM is a high-

magnification zoom lens for use on Canon EOS M Series

cameras.

• "IS" stands for Image Stabilizer.

• "STM" stands for stepping motor.

Camera Firmware

Please use the latest version of rmware with the camera in

use. For details on whether the rmware is the latest version or

not, and for details on updating the rmware, please check the

Canon website.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or damage.

Supplementary notes on using the lens and taking pictures.

Safety Precautions

Precautions to ensure that the camera is used safely. Read

these precautions thoroughly. Make sure all details are

observed in order to prevent risks and injury to the user and

other people.

Warning Details pertaining to risks that may result in death

or serious injury.

• Do not look at the sun or a bright light source through the

lens. Doing so could result in vision loss or blindness.

• Whether it is attached to the camera or not, do not leave

the lens under the sun without the lens cap attached. This

is to prevent the lens from concentrating the sun’s rays, which

could cause a fire.

Caution Details pertaining to risks that may result in injury.

• Do not leave the camera in locations subject to high or

low temperatures. This may result in the camera becoming

excessively hot or cold, which may cause burns or other

injuries when touched.

Caution Details pertaining to risks that may result in damage to

property.

• Do not leave the lens in excessive heat such as in a car

in direct sunlight. High temperatures can cause the lens to

malfunction.

General Precautions

Handling Precautions

• If the lens is taken from a cold environment into a warm one,

condensation may develop on the lens surface and internal

parts. To prevent condensation in this case, first put the lens

into an airtight plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has warmed

gradually. Do the same when taking the lens from a warm

environment into a cold one.

• Please also read any lens related handling precautions listed

in your camera’s instruction manual.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless

otherwise specified in the instructions. If such changes or modifications

should be made, you could be required to stop operation of the

equipment.

This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

CAN ICES-3 (B) / NMB-3 (B)

1. Mounting and Detaching the Lens

See your camera’s instructions for details on mounting and

detaching the lens.

• After detaching the lens, place the lens with the rear end

up to prevent the lens surface and contacts from getting

scratched. (fig. )❶

• Contacts that are scratched, soiled, or have fingerprints on

them may result in faulty connections or corrosion, which

may lead to malfunctions. If the contacts get soiled, clean

them with a soft cloth.

• Attach the lens cap and dust cap when disconnecting the

lens. When attaching the dust cap, align the lens mount

index with the index of the dust cap and rotate in a k

clockwise direction as shown in the illustration. (fig. ) ❷

Follow the reverse procedure to detach it.

2. Zooming

Turn the lens’ zoom ring to adjust the size of the photo field or

subject. (fig.❸)

• For wide shots, turn the zoom ring toward the wide end.

• For close-ups, turn the zoom ring toward the telephoto end.

• Be sure to finish zooming before focusing. Zooming after

focusing can affect the focus.

• Blurring may temporarily occur if the zoom ring is quickly

rotated.

• Zooming during still image exposure will result in delayed

focus. This causes any streaks of light that are captured

during exposure to be blurred.

Produkt Specifikationer

Mærke:	Canon
Kategori:	Linse
Model:	EF-M 18-150mm f/3.5-6.3 IS STM
Vægt:	300 g
Produktfarve:	Sort
Diameter:	60.9 mm
Manuel fokus:	Ja
Sensortype:	CMOS
Grænseflade til montering af objektiv:	Canon EF-M
Fokusindstilling:	Auto/manuel
Autofokus:	Ja
Længde:	86.5 mm
Nærmeste fokuseringsafstand:	0.25 m
Maksimale blænderåbning tal:	6.3
Komponent til:	MILC
Brændviddeområde:	18 - 150 mm
Kameramærker kompatibilitet:	Canon
Objektivstruktur (elementer/grupper):	17/13
Filterstørrelse:	55 mm
Mindste blænderåbnimg tal:	3.5
Blændeområde (F-F):	3.5 - 6.3