Canon FDJ-S01 Manual

Canon Linse FDJ-S01

Læs gratis den danske manual til Canon FDJ-S01 (2 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Canon FDJ-S01, eller vil du spørge andre brugere om produktet?

Side 1/2
BT1-D016-A-ENG 1/2© 2022.10 CANON INC.
MOUNTING AND CONNECTING
1. Loosen the large and small lock knobs of the clamper supplied with the focus
demand, and then mount the clamper to the pan handle of the tripod.
2. After mounting the clamper to the pan handle, tighten the large and small lock
knobs to secure the clamper.
3. Mate the rose joint of the focus demand with the rose joint of the clamper. Then
tighten the mounting knob of the clamper to rmly secure the focus demand.
lens, and the other side into the connector of the focus demand.
OPERATION AND FUNCTION
[ Focusing operation ]
Turning the operation knob on the focus demand brings the object into focus.
[ Changing the focus direction ]
The direction of far or near can be switched by shifting the reverse switch on the
focus demand.
The factory default setting is to focus on a farther object when turned clockwise
as viewed from the operation knob side.
[Selecting the focus characteristics curve]
The focus characteristics curve selector switch on the focus demand can be
used to select one of the focus characteristics from the following three modes.
Standard mode
Standard characteristics where the focus lens
group is moved almost linearly, relative to the
operation knob rotation angle.
Far mode
Focusing resolution for farther objects is
intentionally increased. This enables ne and
easy adjustment work for farther objects near
to innity.
Near mode
Focusing resolution for closer objects is
intentionally increased. This enables ne and
easy adjustment work for closer objects near
to M.O.D.
PRODUCT LIST
Make sure all of the following items are included in the packing box. If you nd
any item missing, please contact your dealer.
Focus Demand
Clamper
CR-30
Demand Cable
Operation Manual "Before Using The Product"
Operation Manual "Regulations"
Before using the product, make sure to read the "GENERAL SAFETY INFORMATION"
and be sure to use the product correctly.
Thank you for purchasing a focus demand FDJ-S01.This focus demand FDJ-S01 is
an accessory used to perform focus servo operations of a box type lens. The focus
can be operated remotely by using this demand.
Lens Accessory
Focus Demand
FDJ-S01
OPERATION MANUAL
This product comes with the following documents:
Operation Manual "Before Using The Product"
Included with the product
Operation Manual "Regulations"
Included with the product
Operation Manual
Web
(Unit: mm)
VIEW A
φ80
30
A
φ72
60°
59
97
84
50
15°
7 7
Rose Joint
Connector to Lens
Operation Knob
Index Pin
Focus Characteristics Curve Selector Switch
Reverse Switch
[
External view
]
Knob Position
Focus Position
M.O.D.
Infinity
Standard Mode
Near Mode
Far Mode
BT1-D016-A-ENG 2/2© 2022.10 CANON INC.
All rights reserved. No part of
this operation manual may be
reproduced or copied in any from
or by a n y m e a ns w itho u t th e
written permission of Canon Inc.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation manual must be observed.
Failure to observe these warnings and cautions provided to guard against hazards may result in injury
or accident. Read this operation manual carefully to familiarize yourself with its contents and ensure
that you can operate the product properly. Also, keep this manual in a safe place where it can easily be
referenced whenever required.
This manual uses the following symbols and terms in the warning and caution notices for preventing accidents
and protecting the safety of the customer and others.
WARNING
This indicates a potentially hazardous situation which, if not heeded, may
result in death or serious injury to you or others. Be sure to heed all warning
notices to ensure safe operation at all times.
CAUTION
This indicates a potentially hazardous situation which, if not heeded, may
result in a minor injury to you or others, or damage to property. Be sure to
heed all caution notices to ensure safe operation at all times.
NOTE
This indicates cautions and recommendations for operation. It contains
information which, if not heeded, may result in this product failing to function
properly. These notices also contain useful information for operation.
HANDLING THE PRODUCT
WARNING
1. Do not get this product wet or allow liquid inside. If water gets inside, stop using the product
immediately. Continuing to use the product under this condition may cause a re or electric shocks.
2. Be sure to hold the connector when disconnecting the cable. Pulling on the cable may sever or
damage it and pose a risk of a re or electric shocks from a short circuit.
CAUTION
1. Be careful not to drop the product when carrying it. Dropping the product may cause injury.
2. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall o󰀨
and cause injury.
3. Inspect mountings regularly (about every six months to one year) to ensure they are securely
tightened. If a mounting becomes loose, parts may fall o󰀨 and cause injury.
NOTE
1. Striking or dropping the lens may cause the malfunction of the product.
2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture.
Otherwise it may cause the malfuction of the product.
3. In dusty environments, cover the product when attaching or removing the product. If dust enters
inside, it may cause the malfunction of the product.
4. Before use in particular environments, such as places where chemical products are used, contact
your Canon sales representative or dealer. Otherwise it may cause the malfuction of the product.
DEALING WITH ABNORMALITIES
WARNING
If any of the following situations occurs, immediately disconnect the power plug from the power
outlet and contact your Canon sales representative or dealer.
Smoke, fumes, or unusual noises
Entry of foreign objects (such as liquid or metal objects) inside the product
MAINTENANCE AND INSPECTION
WARNING
Be sure to disconnect the cable and remove the lens from the camera before cleaning outside
of the lens. Do not use benzene, thinner, or other ammable substances to clean the product.
Otherwise it may cause a re or electric shocks.
NOTE
Routine inspection about once a year is recommended, depending on the conditions and
environment of use. Request overhaul, if needed.
STORAGE
NOTE
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry
cloth. Seal the lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside.
Otherwise it may cause the mold or the malfunction of the product.
TO THE CUSTOMER
1. Canon shall bear no responsibility for damage resulting from improper operation of this product by
the customer.
2. Canon shall make no guarantees about the product quality, functions, or operation manual
and its marketability and suitability for the customers purpose. Moreover, Canon shall bear no
responsibility for any damage, direct or incidental, that results from usage for the customer’s
purpose.
3. The product specifications, configuration, and appearance are subject to change without prior
notice.
4. For further information on repairs, maintenance, or adjustments not mentioned in this operation
manual, contact your Canon sales representative or dealer.
5. Note that Canon may be unable to undertake servicing or repair of a product if it is modied without
consulting Canon or your Canon sales representative.


Produkt Specifikationer

Mærke: Canon
Kategori: Linse
Model: FDJ-S01

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon FDJ-S01 stil et spørgsmål nedenfor, og andre brugere vil svare dig