Canon PowerShot S2 IS Manual

Canon Videokamera PowerShot S2 IS

Læs gratis den danske manual til Canon PowerShot S2 IS (2 sider) i kategorien Videokamera. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Canon PowerShot S2 IS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Playback Mode:

Standard Information view

Detailed Information view

No Information

A.Connect the camera to the printer and turn on the

printer's power.

B. , , appears* in the upper-left corner of the camera's

LCD monitor, indicating that the printer is ready to print.

Quick Reference

Switching Between Shooting/Playback

Shooting Modes

: Shoots with settings selected by the camera.

:Portrait

The background is blurred and the subject is

in clear focus

:Landscape

For shooting landscape scenes.

:Night Scene

For photographing human subjects against the

backdrop of an evening sky or a night scene.

:Special Scene

Select from six scene modes to shoot with the most appropriate

settings for the scene.

:My Colors

Use these modes to change image colors and then shoot.

:Stitch Assist

Images shot in Stitch Assist mode can be merged together on a

computer to make a single panoramic image.

:Movie

For shooting movies.

Auto

C. Select the image that you want to print with the B or A

button on the omni selector and press the button.

The button will flash blue and printing will start.

➜ Direct Print User Guide

Macro Shooting

Press the button to display the on the LCD monitor. Use this mode

to shoot close-ups of flowers or small objects.

* Recordable Area at Minimum Shooting Range

At max. wide angle end: approx. 118 x 87 mm (4.6 x 3.4 in.)

Changing the Displayed Information

Press the DISP. button to switch the displayed information, as follows.

In addition, there are functions that can be set in each shooting mode. For

details refer to “Functions Available in Each Shooting Mode” at the end of the

Camera User Guide.

Shooting:

Turn the mode lever to while pressing

the release button.

Playback:

Turn the mode lever to while pressing

the release button.

The following manuals are supplied with your camera. Please refer to them

as need be.

Contents of This Guide

B. Play back the images.

Use the button to display the image youB or A

wish to see.

Mode Lever

Release

Button

AButton

B Button

A.Use the B or A button on the

omni selector to select the

image that you want to erase

( ) and press the button

( ).

B. When the confirmation screen appears, check

that [Erase] is selected and press the SET button.

Select [Cancel] using the B or A button on the omni selector to

cancel without erasing.

B. Insert the batteries as

shown.

C. Close the battery cover.

D.Open the memory card slot

cover.

Reference Guides

Quick Start

Guide

Direct Print User Guide

Printer User

Guide

•Camera User Guide

•Software Starter Guide

•ZoomBrowser EX

Software User Guide

•ImageBrowser

Software User Guide

This

guide

System Map

Supplied with

a printer

Erasing an Image

Camera User Guide

Preparing the Camera

Playback

➜ Camera User Guide

A.Turn the mode lever to (Playback)

while pressing the release button.

- If you wish to use the LCD monitor, open it.

- The power/mode lamp lights green.

1. Install the batteries and the

memory card.

Shoot images with the camera.

3. Play back the images.

4. Erase any unwanted images.

Learn the names of camera

components.

5. Print the images.

Included accessories and separately

sold equipment information.

6. Install the software.

Connect the camera to a

computer.

The various ways of using the

software.

What you can do with the

software.

7. Download the images to a

computer.

A.Turn the mode lever

to (Shooting)

while pressing the

release button.

B. Turn the mode dial to .

C. If you wish to use the LCD

monitor, open it.

Set the date and time. The first time you

turn on the camera, you must set the

date and time.

E. Aim the camera at the subject and adjust the zoom to

achieve the desired composition. (See “Zoom” in the “Quick

Reference”section.)

F. Focus and shoot.

➜ Camera User Guide

2Shooting

Press the shutter button

all the way to shoot.

➜ ➜ Camera User Guide Camera User Guide

➜ Camera User Guide

Printing with a Direct Print Compatible Printer

Printers

These PDF format guides

are available on the Canon

website. Please download

them from the following

URL: http://web.canon.jp/

Imaging/Information-

e.html

A.Open the battery

cover.

Mode Lever

Release

Button

Camera

Power/Mode

Lamp

The Power/Mode lamp lights orange.

Power/Mode

Lamp

Release button

With the label side up, insert the

memory card into the slot.

Insert the memory card all the way

until it clicks.

Slide the memory card slot cover

closed.

Shooting mode:

LCD monitor - On (no information)

LCD monitor -

n (information view)

LCD viewfinder

(no information)

LCD viewfinder - O

(information view)

Continuous Shooting/Self-timer

Press the / button to cycle through the settings.

(Some settings are not available with certain shooting modes.)

Single image shooting

Continuous shooting

/ / Self-timer (10 sec.) / Self-timer (2 sec.) / Custom

Zoom

Wide Angle

Zoom out from the subject.

Telephoto

Zoom in on the subject.

* The zoom can be adjusted from 36 to

432 mm (35 mm film equivalent).

Telephoto

Wide Angle

Use the B or A button on the omni

selector to select the items that you want to

set, and then use the C or D button on the

omni selector to change the value.

Check that the date and time shown are

correct, and then press the button.SET

Press the shutter button half-

way to focus.

The camera focuses and beeps

twice.

* The displayed icon may vary depending on the printer model.

To remove the memory card

Push the memory card until the card clicks and then release it.

Flash Range: 70 cm - 5.2 m (2.3 - 17.1 ft.) (wide-angle)

70 cm - 4.0 m (2.3 - 13.1 ft.) (telephoto)

* Red-eye reduction: This feature reduces the effect of light reflecting back

from the eyes and making them appear red.

Flash

When the blinks red on the LCD monitor or viewfinder, or when you wish to use the

flash, raise it manually. Once the flash is raised, press the button to cycle between

flash

modes. Some flash modes are not available with certain shooting mode.

When the red-eye reduction function

is on

Auto with red-eye reduction

Flash on with red-eye reduction

Flash off (when flash is lowered.)

Flash off

(when flash is lowered)

When the red-eye

reduction function is off

Auto

Flash on

Please turn over

Interface cable

6Preparing to Download Images to a Computer

Never connect the camera to the computer before the

software is installed.

List of Things to Prepare

• Camera and Computer

• Canon Digital Camera Solution Disk provided with the

camera

• Interface Cable (use the cable provided with the camera)

A.Confirm that the computer meets the system

requirements.

See the Camera User Guide.

B.Install the software.

a. Place the Canon Digital Camera Solution

Disk into your computer’s CD-ROM drive.

• Double-click the [Canon Digital Camera Installer] ( )

icon in the CD-ROM window.

b.Click the Digital Camera Software [Install] button

and click [Next].

c. Select [Easy Installation] and click

[Next].

Proceed with the installation while reviewing

installation settings.

d.When the installation is complete,

select [Yes, I want to restart my

computer now.] as shown in the screen

below, and click [Finish].

Once the installation is complete, click

[Quit].

e. Remove the disk from the CD-ROM

drive after restarting.

➜ Camera User Guide, Software Starter Guide

C.Connect the camera to the computer.

Connect the supplied interface cable to

the computer's USB port and the

camera's DIGITAL terminal.

• Slip a fingernail under the bottom edge of

the camera's DIGITAL terminal cover, lift it

up and plug the interface cable in all the

way.

• Treat the connector area with great care

while you attach and remove the

interface cable.

• When communication between the

computer and camera is established, the

LCD monitor or viewfinder turns off and

the power/mode lamp lights yellow.

Set the ImageBrowser auto start settings before you connect the camera to the computer for the first time.

ImageBrowser Auto Start Settings

OS X (v10.2/v10.3)

1. Start Image Capture, click the [Image Capture]

menu and select [Preferences].

2. In the next menu, click the [When a camera is

connected, open:] list box and select [Other].

The window will appear slightly different in v10.2.

3. Select [CameraWindow] in the program

selection window.

CameraWindow is generally installed into the folder

opened by selecting the [Applications], [Canon

Utilities] and [CameraWindow] folders.

4. Click [OK] and then close Image Capture.

OS X (v10.1)

1. Start Image Capture and select [Other] from

the [Hot Plug Action] list box.

2. Select [CameraWindow] in the program

selection window.

CameraWindow is generally installed into the folder

opened by selecting the [Applications], [Canon

Utilities] and [CameraWindow] folders.

3. Close Image Capture.

7Downloading Images to a Computer

➜ Camera User Guide, Software Starter Guide

A.Select [Canon CameraWindow]

and click [OK] (first time only).

B.Download the images.

Download the images using the camera

or the computer.

By default, the downloaded images are

saved into the [My Pictures] folder.

You can set the type of image to

download and the destination

folder by clicking [Preferences].

The downloaded images will appear as thumbnails

(tiny versions) in the Main Window of

ZoomBrowser EX. By default, the downloaded

images are saved in separate folders according to

the date on which they were shot.

A dialog allowing you to set the default settings will display when you attach the camera and open a connection. The following window will display when the camera and computer are set to the correct mode for

communicating.

Double-click the [Canon CameraWindow] icon on the desktop if the window does not appear.

You can set the type of image to

download and the destination

folder by clicking [Preferences].

I m a g e d o w n l o a d i s c o m p l e t e .

Getting the Most out of the Software ➜ Software Starter Guide, ZoomBrowser EX / ImageBrowser Software User Guide

What you can do with other software

You can use this software in even more advanced ways by linking it

with other software.

■Printing Images with Different Layouts

With PhotoRecord (Windows)/

ImageBrowser (Macintosh), you can

lay out images as desired and then

print them.

What you can do with ZoomBrowser EX (Windows) / ImageBrowser (Macintosh)

■Downloading Images to a Computer

You can easily download images saved in the camera to a

computer.

■Checking Images

You can magnify images and check the information on them

(the shooting date and time, the shooting settings, etc.)

■Sending Images by E-mail

You can start your e-mail program from ZoomBrowser EX

(Windows) / ImageBrowser (Macintosh) and attach images to

e-mail messages that you send.

■Editing Movies

You can create and edit movies: link movies and stills that

have been downloaded to your computer, add background

music, superimpose titles and other text, and apply various

effects to the movies.

■Using the My Camera Settings

Your favorite images and sounds can be registered as

startup-up images and sounds with My Camera Settings.

■Stitching Panoramic Images

With PhotoStitch, you can

connect or “stitch” multiple

images together into a

seamless panoramic view.

A Guide to the Manuals

■Basic Methods: Software Starter Guide

■Advanced Methods: PDF Manuals

The manuals in PDF format shown below are available

on the Canon website. Please download them from

the following URL:

http://web.canon.jp/Imaging/information-e.html

•ZoomBrowser EX Software User Guide (Windows)

•ImageBrowser Software User Guide (Macintosh)

Viewing the PDF Manuals

The software application Adobe Reader or Adobe

Acrobat Reader is required to view the PDF manuals.

If one of these applications is not already installed on

your computer, download it from the following website.

http://www.adobe.com/products/acrobat/readstep2.html

7Downloading Images to a Computer

➜ Camera User Guide, Software Starter Guide

If the window shown above does not

appear, click the [Start] menu, then

select [Programs] or [All Programs],

followed by [Canon Utilities],

[CameraWindow] and

[CameraWindow].

A.Download the images.

Download the images using the camera

or the computer.

By default, the downloaded images are

saved into the [Pictures] folder.

The downloaded images will appear as thumbnails

(tiny versions) in the Browser Window of

ImageBrowser. By default, the downloaded images

are saved in separate folders according to the date

on which they were shot.

Thumbnail Thumbnail

Downloading Images Using Camera Operations (Direct Transfer)

a. Confirm that the button lights blue.

b.When the Direct Transfer menu appears in the camera’s LCD monitor, use

the or button.button to select (All Images) and press the

All the images on the camera's memory card will download. To selectively download

images, select (Select & Transfer).

Downloading Images Using Computer

Operations

a. Click [Starts to download images].

By default, all the images that have yet to be

downloaded will download.

If the Digital Signature Not Found window appears, click [Yes].

The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection.

USB port

To DIGITAL

terminal

Terminal cover

Power/Mode Lamp

Interface cable

Produkt Specifikationer

Mærke:	Canon
Kategori:	Videokamera
Model:	PowerShot S2 IS
Bredde:	113 mm
Dybde:	78 mm
Højde:	75.5 mm
Vægt:	405 g
Produktfarve:	Sølv
Skærm diagonal:	1.8 "
Kompatible hukommelseskort:	sd
Batteriteknologi:	Alkaline
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Understøttede videoformater:	AVI
Driftstemperatur (T-T):	0 - 40 °C
Skærm:	LCD
Understøttede billedformater:	4:3
Strømkilde:	4 x AA
Batteritype:	AA
Mac kompabilitet:	Ja
Medfølgende software:	- ZoomBrowser EX (PhotoRecord) / ImageBrowser;\n- PhotoStitch, RemoteCapture;\n- TWAIN (Windows 98 / 2000), WIA (Windows Me);\n- ArcSoft PhotoStudio.
Kompatible operativsystemer:	PC: Windows 98SE / Me / 2000 SP4 / XP / XP SP1-2;\nMac: OS X v10.1.5 - 10.3.\n
Skærmopløsning (numerisk):	115.000 pixel
Flashtilstande:	Auto, Red-eye reduction
Megapixel:	5.3 MP
Sensortype:	CCD
Billede sensor størrelse:	1/2.5 "
Optisk zoom:	12 x
Digital zoom:	4 x
Grænseflade:	USB 2.0
Brændviddeområde:	6 - 72 mm
ISO-følsomhed:	50,100,200,400,AUTO
Indbygget flash:	Ja
Digital SLR:	Ingen
Kameraets lukkerhastighed:	15 - 1/3200 sek./side
I/O-porte:	1 x USB 2.0 (Mini-B, PTP);\n1 x A/V (PAL/NTSC)
Fototilstand:	Auto, Program AE, Shutter priority AE, Aperture priority AE, Manual, Custom, Portrait, Landscape, Night Scene, My Colors, Stitch Assist, Movie
Objektivsystem:	n/a
Datakomprimering:	Superfine, Fine, Normal
Lydoptager:	60s