Casio 3423 Manual

Casio Ur 3423

Læs nedenfor 📖 manual på dansk for Casio 3423 (14 sider) i kategorien Ur. Denne guide var nyttig for 66 personer og blev bedømt med 4.9 stjerner i gennemsnit af 33.5 brugere

Side 1/14
Operation Guide 3423
MA1411-EC
© 2014 CASIO COMPUTER CO., LTD.
Basic Operations
Operations common to each
mode are shown below. Check
content when using the watch.
Mode Switching
This watch has eight modes
(functions), including the
Timekeeping Mode that displays
the current time.
(Timekeeping Mode)
Timekeeping Mode
Stopwatch Mode
Recall Mode
World Time Mode
Alarm Mode
Countdown Timer Mode
Setup Mode
Control Mode
Press to switch modes. TheB
flowchart below shows how the
mode switches when you press
B.
* To toggle between the Control
Mode and other modes, hold
down for approximately threeB
seconds. Perform this operation
while the Control indicator is on
the display.
a. Control indicator
The Control Mode can be
switched only when connected to
a mobile phone. For details, refer
to the CASIO WATCH+ App
Setup Guide.
Important!
The Control Mode cannot be
switched to while the app
setting is one that does not
use the Control Mode.
Tap Operations
When an alarm or timer beep or
vibration alert operation is being
performed, the tap operation can
be used to stop the beep or
vibration.
The tap indicator flashes on the
display while the tap operation is
enabled.
a.Tap indicator
At this time, tapping the center of
the watch's display twice
(double-tapping) stops the beep
or vibration.
Important!
Tapping the display with your
fingernail or some other hard
object can scratch the watch's
display panel. Be sure to tap
with the ball of the finger.
Operation Guide 3423
Watch Settings
When communicating with a
mobile phone, the time and date
of the mobile phone is
automatically adjusted to. When
there is no communication with a
mobile phone, the time and date
can be adjusted with the
procedure below.
【 】Preparation
The procedure here is performed
in the Timekeeping Mode. Press
B to switch to the Timekeeping
Mode.
See: .Mode Switching
(Timekeeping Mode)
Setting the City
Sets the time offset of the city
where the watch is used. When
summer time is implemented in
the city where the watch is used,
summer time can also be set.
Important!
Incorrectly setting the time
offset will cause incorrect
times to be displayed in the
World Time Mode.
y g
offset will cause incorrect
Time Offset Setting
Hold down for about twoC
seconds.
[SET Hold] will appear and
the time offset will flash.
a. Time differential
Use and to change theD A
flashing time offset setting.
For the time offset,
specify a time zone listed
in the .City Name List
Example:
If you plan to use the watch
in Tokyo, set a time offset of
[+ 09:00].
Press to end setting.C
1.
2.
3.
Summer Time Setting
Hold down for about twoC
seconds.
[SET Hold] will appear and
the time offset value will
1.
flash.
Press to display theB
Press to specify OND
(summer time) or OFF
(standard time).
a.DST indicator
Press to end setting.C
Note
The DST indicator is
displayed while summer time
is set.
2.
3.
4.
flash.
Press to display theB
summer time setting screen.
2.
Setting the Time and Date
Hold down for about twoC
seconds.
[SET Hold] will appear and
the time offset value will
flash.
a. Time differential
Press three times toB
display the seconds reset
screen.
Press to reset theD
seconds to 00.
1.
2.


Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: 3423

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio 3423 stil et spørgsmål nedenfor, og andre brugere vil svare dig