Casio 5302 Manual
Læs nedenfor 📖 manual på dansk for Casio 5302 (8 sider) i kategorien Ur. Denne guide var nyttig for 23 personer og blev bedømt med 4.3 stjerner i gennemsnit af 12 brugere
Side 1/8
Congratulations upon your selection of this CASIO watch.
Applications
This watch has built-in sensors that measure direction and temperature.
Measurement results are indicated by the watch's hands and displays. These features make this watch
useful when hiking, mountain climbing, or when engaging in other such outdoor activities.
Warning!
• The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
•
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E E-1
ENGLISH
E-2
About This Manual
• Depending on the model of your watch, display text appears either as
dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
• Button operations are indicated using the letters shown in the
illustration.
• Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-3
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-13) to confi gure your Home City and
daylight saving time settings.
Important!
Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping
Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-15).
The watch is now ready for use.
E-4
Contents
E-2 About This Manual
E-3 Things to check before using the watch
E-7 Mode Reference Guide
E-12 Timekeeping
E-13 Confi guring Home City Settings
E-13 To confi gure Home City settings
E-14 To change the daylight saving time (summer time) setting
E-15 Confi guring Current Time and Date Settings
E-15 To change the current time and date settings
E-18 Hand Home Position Adjustment
E-18 To adjust home positions
E-20 Using the Digital Compass
E-20 To perform a digital compass operation
E-23 To perform bidirectional calibration
E-25 To perform magnetic declination correction
E-26 To store a direction angle reading in Bearing Memory
E-29 To set a map and fi nd your current location
E-30 To fi nd the bearing to an objective
E-31 To determine the direction angle to an objective on a map and head in that direction
(Bearing Memory)
E-5
E-34 Taking Temperature Readings
E-34 To enter and exit the Thermometer Mode
E-34 To take temperature readings
E-36 To calibrate the temperature sensor
E-37 Specifying Temperature Unit
E-37 To specify the temperature unit
E-38 Checking the Current Time in a Different Time Zone
E-38 To enter the World Time Mode
E-38 To view the time in another time zone
E-39 To specify standard time or daylight saving time (DST) for a city
E-40 To swap your Home Time and World Time Cities
E-41 Using the Stopwatch
E-41 To enter the Stopwatch Mode
E-41 To perform an elapsed time operation
E-41 To pause at a split time
E-42 To measure two fi nishes
E-43 Using the Countdown Timer
E-43 To enter the Countdown Timer Mode
E-43 To specify the countdown start time
E-44 To perform a countdown timer operation
E-44 To stop the alarm
E-6
E-45 Using the Alarm
E-45 To enter the Alarm Mode
E-46 To set an alarm time
E-46 To test the alarm
E-47 To turn an alarm and the Hourly Time Signal on and off
E-47 To stop the alarm
E-48 Illumination
E-48 To illuminate the display manually
E-48 To change the illumination duration
E-50 To enable or disable the auto light switch
E-52 Button Operation Tone
E-52 To enable or disable the button operation tone
E-53 Troubleshooting
E-57 Specifi cations
E-7
Mode Reference Guide
Your watch has 7 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure time and date settings
Timekeeping Mode E-12
• Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass Mode E-20
Determine the temperature at your current location Thermometer Mode E-34
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-38
Use the stopwatch to measure elapsed time Stopwatch Mode E-41
Use the countdown timer Countdown Timer Mode E-43
Set an alarm time Alarm Mode E-45
Operation Guide 5302
MO1409-ED © 2012 CASIO COMPUTER CO., LTD.
E-8
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
World Time ModeStopwatch Mode
Countdown Timer Mode Alarm Mode
Mode dial hand
World Time ModeStopwatch Mode
Countdown Timer Mode Alarm Mode
Mode dial hand
E-9
• The mode dial hand indicates the watch’s current mode.
Thermometer Mode
Timekeeping Mode
Digital Compass Mode
Mode dial hand
Mode dial hand
Thermometer Mode
Timekeeping Mode
Digital Compass Mode
Mode dial hand
Mode dial hand
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
• To enter the Timekeeping Mode from any other mode, hold down
D for about two seconds.
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Alarm, Digital Compass 3 minutes
Thermometer 1 to 2 minutes
Setting screen (digital setting fl ashing) 3 minutes
Initial Screens
When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you
last exited the mode appears fi rst.
Scrolling
The E and B buttons are used on the setting screen to scroll through data on the display. In most
cases, holding down these buttons during a scroll operation scrolls through the data at high speed.
E-11
Digital Meters
• The upper digital meter (Digital Meter A) indicates the seconds count in the Timekeeping Mode (page
E-12), World Time Mode (page E-38), and Timer Mode (page E-43). In the Stopwatch Mode (page
E-41) it indicates the 1/10-second count. While viewing bearing memory contents in the Digital
Compass mode (page E-27), it shows a bearing pointer.
• In all modes (except when a fl ashing setting screen is displayed), the lower digital meter (Digital Meter
B) shows the current Timekeeping Mode time (fl ashing) and World Time time (not fl ashing).
Example:
Digital Meter A Digital Meter B
HTWT
WT: Current World Time time (London, 1:08 p.m.)
HT: Current Timekeeping Mode time (Tokyo, 10:08 p.m.)
E-12
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of A in the Timekeeping Mode will change screen contents as shown below.
• Digital Meter A shows the seconds count.
Date Screen Time Screen
Day of week
Seconds
Hour :
Minutes
Month Day
Hour hand
Second hand
Digital Meter A Digital Meter B
Minute hand
Mode dial
hand
PM
indicator
E-13
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
• When you release A (after ADJ appears), SET will be fl ashing in
the lower display. This is the setting mode.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
2. Use E (East) and B (West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City is shown in the upper display.
• For details about city codes, see the “City Code Table” at the back
of this manual.
3. Press D.
• This will cause DST to appear in the lower screen and the DST
setting of the currently selected Home City to appear in the upper
screen.
4.
Press
E
to toggle the DST setting between daylight saving time (
ON)
and standard time (OFF).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
City code and city name
DST indicator
City code and city name
DST indicator
E-14
5. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator appears to indicate that daylight saving time is turned on.
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
• When you release A (after ADJ appears), SET will be fl ashing in
the lower display.
2. Press D.
• This will cause DST to appear in the lower screen and the DST
setting of the currently selected Home City to appear in the upper
screen.
3. Press E to toggle the DST setting between daylight saving time (
ON ) and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator appears to indicate that daylight saving time is turned on.
E-15
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-18).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
• When you release A (after ADJ appears), SET will be fl ashing in
the lower display.
City codeCity code
Operation Guide 5302
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | 5302 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio 5302 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur Technoline
- Ur Fila
- Ur Jaguar
- Ur Fysic
- Ur Olivia Burton
- Ur Prologue
- Ur Jacob Jensen
- Ur Hamilton
- Ur Balmain
- Ur Dakota
- Ur Naitica
- Ur Swiza
- Ur DMC
- Ur Salter
- Ur Certina
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025