Casio A178WA-1ADF Manual

Casio Ur A178WA-1ADF

Læs gratis den danske manual til Casio A178WA-1ADF (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Casio A178WA-1ADF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER’S GUIDE 2519

General Guide

•Press C to change from mode to mode.

•In any mode, press B to illuminate the display.

•In any mode, hold down C for about two seconds to return to the

Timekeeping Mode.

Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode

Press .

Timekeeping

Use the Timekeeping Mode to set and view the

current time and date.

To set the time and date

1.In the Timekeeping Mode, hold down until theA

seconds start to flash, which indicates the setting

screen.

2.Press C to move the flashing in the sequence

shown below to select other settings.

Seconds Hour Minutes

Day Month Year

Hour : Minutes Seconds

Day of week

PM indicator

Month – Day

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeepingD

and 24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode

is applied in all other modes.

Alarm

The multi-function alarm lets you specify the hour,

minutes, month, and day for the alarm. You can set up

the alarm so it sounds once when the alarm time is

reached, or for a snooze alarm that repeats up to seven

times, every five minutes.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

•Pressing D in the Alarm Mode toggles between

the alarm screen (Alarm time displayed) and the

Hourly Time Signal screen (

:00 displayed).

•An alarm setting (and an Hourly Time Signal

setting) is available in the Alarm Mode, which you

enter by pressing C.

Month – Day

Hour : Minutes

Alarm Types

The alarm type is determined by the settings you make, as described below.

••••

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set.

••••

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting

causes the alarm to sound at the specific time, on the specific date you set.

••••

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes

the alarm to sound everyday at time you set, only during the month you set.

••••

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound every month at time you set, on the day you set.

4. While a setting is flashing, press to increase it.D

•To set an alarm that does not include a month (Daily alarm, Monthly

alarm), set x for the month. Press D until the x mark appears (between

12 and 1) while month setting is flashing.

•To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press D until the xx mark appears (between the end

of the month and 1) while the day setting is flashing.

•When setting the alarm time using the 12-hour format, take care to set the

time correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for about 10 seconds. In the case of

the snooze alarm, the alarm repeats up to seven times every five minutes.

•Pressing any button stops the alarm tone operation.

•The alarm and the Hourly Time Signal sound in all modes.

To set an alarm time

1.In the Alarm Mode, press D to display the alarm

screen.

2.Hold down A until the hour setting of the alarm

time starts to flash, which indicates the setting

screen.

•This operation automatically turns on the one-

time alarm.

3.Press C to move the flashing in the sequence

shown below to select other settings.

Hour Minutes Month Day

To select the alarm type

1.In the Alarm Mode, press D to display the alarm

screen.

2.Press A to cycle through the available alarm

settings shown below.

One-time

alarm on

Alarm off

[Module 2518]

[Module 2519]

Snooze

alarm on

•The alarm on indicator and the snooze alarm on

indicator are shown on the display in all modes

while these functions are turned on.

•The snooze alarm on indicator flashes during the

5-minute intervals between alarms.

•Displaying the Alarm Mode setting screen automatically changes the alarm

type to one-time alarm.

•Changing the Timekeeping Mode setting screen during a 5-minute interval

between snooze alarms stops the current snooze alarm operation (but

snooze alarm remains as the alarm type setting).

•If a snooze alarm time is reached while you are setting the current time in the

Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm

operations are not performed.

Stopping a Snooze Alarm Operation

After a snooze alarm time is reached, you can perform the following steps

during any 5-minute interval between alarms to stop the snooze alarm

operation.

To stop a Snooze Alarm Operation

1. While in the Alarm Mode, press to display the alarm screen.D

2. Next, press to turn off the alarm or to select the one-time alarm.A

•Note that this also changes the alarm type setting. If you want to use the

snooze alarm again, you must re-select it as the alarm type. See “To select

the alarm type” for more information.

[Module 2518]

[Module 2519]

Alarm on/off indicator

To test the alarm

•In the Alarm Mode, hold down to sound the alarm.D

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, press D to display the Hourly Time Signal screen.

2. Press A to turn it on and off.

Indicates Hourly Time Signal is on.

Indicates Hourly Time Signal is off.

•The Hourly Time Signal on indicator is shown on the display in all modes

while this function is turned on.

[Module 2518] [Module 2519]

3. When the setting you want to change is flashing, press to change it asD

described below.

To change this setting

Seconds

Hour, Minutes, Year, Month, Day

Perform this button operation

Press .D to reset to 00

Press D to increase the setting.

•Pressing D while the seconds are in the range of 30 to 59 resets them to

00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are

unchanged.

4. Press A to exit the setting screen.

•The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar automatically makes allowances

for different month lengths and leap years. Once you set the date, there

should be no reason to change it except after you have the watch’s battery

replaced.

USER’S GUIDE 2519

Stopwatch

The stopwatch lets you measure elapsed time, split

times, and two finishes.

•The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from

zero after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues

even if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is

frozen on the display clears the split time and

returns to elapsed time measurement.

•All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing

Seconds

1/100 second

Hours

Minutes

To measure times with the stopwatch

Elapsed time

Start Stop Re-start Stop Clear

Start Split

( displayed)SPL

Split release Stop Clear

Start Split Stop Split release Clear

Split time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

•In the Dual Time Mode, the seconds count is synchronized with the seconds

count of the Timekeeping Mode.

To set the Dual Time

1.Press C to enter the Dual Time Mode.

2.In the Dual Time Mode, hold down A until the

hour setting starts to flash, which indicates the

setting screen.

3.Press C to change the selection in the following

sequence.

Hour Minutes

4.Press D to increase the setting.

5.Press A to exit the setting screen.

Hour : Minutes Seconds

Reference

This section contains more detailed and technical information about watch

operation. It also contains important precautions and notes about the various

features and functions of this watch.

Auto return features

•If you leave a screen with flashing digits for two or three minutes without

performing any operation, the watch automatically saves any settings you

have made up to that point and exits the setting screen.

Data and Setting Scrolling

The D button is used to scroll through setting screen data on the display.

Holding down this button during a scroll operation scrolls through the data at

high speed.

Backlight Precautions

The backlight uses an LED (light-emitting diode) and a light guide panel that

cause the entire display to glow for easy reading in the dark.

In any mode, press to illuminate the display for about one second.B

•The illumination provided by the backlight may be hard to see when viewed

under direct sunlight.

•The backlight automatically stops illuminating whenever an alarm sounds.

•Frequent use of the backlight shortens the battery life.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	A178WA-1ADF
Pakkevægt:	52 g
Pakkedybde:	32.5 mm
Pakkebredde:	39.5 mm
Pakkehøjde:	9.8 mm
Armbånd, materiale:	Metal
Vandfast:	Ja
Urkassens materiale:	Metal
Kalender:	Ja
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	10 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR2025
Urets glastype:	Resin
Alarmfunktion:	Ja
Mekanismetype:	Elektronisk
Husets farve:	Rustfrit stål
Båndets hovedfarve:	Rustfrit stål
Etui form:	Rund
Hovedfarve på urskive:	Grå
Se markørfarve:	Sort
Nøjagtighed:	30 sek/md
Se markørstil:	Arabisk nummervisning