Casio AE-1000WD-1AVEF Manual

Casio Ur AE-1000WD-1AVEF

Læs gratis den danske manual til Casio AE-1000WD-1AVEF (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Casio AE-1000WD-1AVEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3198

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in four

different cities, numbered from T-1 (Time 1) through T-4

(Time 4). T-1 is your Home City Time, and T-2, T-3, and

T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

•The digital dial at the top of the screen indicates the

current Home City Time (T-1). For details on reading the

map and digital dial, see “Map and Digital Dial”.

MA0910-EA

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode World Time Mode Alarm Mode Countdown Timer

Mode

Stopwatch Mode

Press .

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Seconds

Day of week

Month – Day

Hour : Minutes

PM indicator

Map

Digital dial

Switching Between Time Screens

Each press of cycles the time screens in the sequence shown below.D

Displayed for one second.

•While the Home City Time (T-1) screen is displayed, pressing A will switch the day

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

•You can change the current time setting for your Home City Time (T-1) only.

•For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.

Changing the Current Home City Time and Date Settings

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds City Code Hour

Year 12/24-Hour

Format

Minutes

Illumination

Duration Setting

DST

Day Month

4. When the setting you want to change is flashing, use D and B to change it as

described below.

•See “Daylight Saving Time (DST)” for details about DST setting

5. Press A to exit the setting screen.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard

Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time

( displayed) and Standard Time ( displayed).

5. Press A to exit the setting screen.

•The DST indicator appears on the Timekeeping screen

to indicate that Daylight Saving Time is turned on.

12/24-Hour Format

•With the 12-hour format, the indicator appears to the left of the hour digits forPM

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

1. Display the Local Time whose city setting you want to change, and then hold down

A for about two seconds until the current city code starts fo flash.

2. Use D B (east) and (west) to select the city code you want.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time ( displayed) and Standard

Time ( displayed).

5. After the settings are the way you want, press A.

Changing Your Home City Time

Use the following procedure to change your current Home City Time to any one of the

three Local Times.

1. In the Timekeeping Mode, press D to display the Local Time which you want to

make your Home City Time.

2. Press A B and at the same time.

•This makes the Local Time you selected in step 1 your new Home City Time.

Screen

To do this:

Reset the seconds to .

Toggle between Daylight Saving

Time ( ) and Standard Time ( ).

Change the city code.

Change the hour or minutes.

Toggle between 12-hour ( ) and

24-hour ( ) timekeeping.

Change the year.

Change the month or day.

Toggle the setting between

1.5 seconds ( ) and 3 seconds ( ).

Do this:

Press .D

Use D (east) and B (west).

Use ).D (+) and B (–

Press .D

Use ).D (+) and B (–

Press .D

DST indicator

Operation Guide 3198

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down until the currentA

countdown start time starts to flash, which indicates the

setting screen.

2. Press to move the flashing in the sequence shownC

below to select other settings.

Hours Minutes

Seconds

3. When the setting you want to change is flashing, use D (+) and B (–) to change

the flashing item.

•To specify a countdown start time of 24 hours, set .

4. Press A to exit the setting screen.

To use the countdown timer

Press while in the Countdown Timer Mode to start theD

countdown timer.

•When the end of the countdown is reached, the alarm

sounds for ten seconds or until you stop it by pressing

any button. The countdown time is reset to its starting

value automatically when the alarm sounds.

•Press D while a countdown operation is in progress to

pause it. Press D again to resume the countdown.

•To stop a countdown operation completely, first pause it

(by pressing ), and then press . This returns theD A

countdown time to its starting value.

Countdown Timer

The countdown timer can be set within a range of one

second to 24 hours. An alarm sounds when the

countdown reaches zero.

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in.

•Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

•To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press A to cycle through the alarm settings as shown below.

Daily Alarm OnOne-Time Alarm

Alarm Off

•In all modes, the alarm on indicator is shown for the alarm that is currently turned

on.

•The alarm on indicator flashes while the alarm is sounding.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal.

2. Press A to toggle it on and off.

•The Hourly Time Signal on indicator is shown on the

display in all modes while this function is turned on.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the alarm number you want to set is

displayed.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

•This operation turns on the One-time Alarm automatically.

3. Press C to move the flashing in the sequence shown below to select other settings.

Hour Minutes

One-time Alarm/Daily Alarm Selection

4. While a setting is flashing, use D and B to change it as described below.

Alarms

Your watch has a total of five alarms, each of which you

can configure as a daily alarm or one-time alarm.

•Daily Alarm: Sounds at the preset time each day.

•One-time Alarm: Sounds once at the preset time and

then is disabled automatically.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

•Alarms operate in coordination with the current Home

City Time.

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time for another city code

In the World Time Mode, press to scroll eastwardlyD

through city codes.

•For full information about city codes, see the “City Code

Table”.

•If the current time for a city is wrong, check your

Timekeeping Mode time and time zone settings and

make the necessary changes.

Illumination

An LED (light-emitting diode) illuminate the display for easy reading in the dark.

Illumination Precautions

•The illumination provided by the light may be hard to see when viewed under direct

sunlight.

•Illumination automatically turns off whenever an alarm sounds.

•Frequent use of illumination runs down the battery.

To turn on illumination

In any mode (except when a setting screen is on the display), press to turn onB

illumination.

•You can use the procedure above to select either 1.5 seconds or 3 seconds as the

illumination duration. When you press , the illumination will remain on for aboutB

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

Current time and date in

the zone of the selected

city code

City code

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D (east) to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about one second to toggle Daylight

Saving Time (DST displayed) and Standard Time (DST

not displayed).

•The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

•Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

•Note that you cannot switch between Standard Time

and Daylight Saving Time while UTC is selected as the

city code.

To change your Home Time city to the current World Time city

1. In the World Time Mode, use to display the city you want to make your newD

Home Time city.

2. Press and at the same time.A B

•This makes the World Time city you selected in step 1 your new Home Time city.

DST indicator

Alarm time

(Hour : Minutes)

Alarm number

Alarm on indicator

5. Press A to exit the setting screen.

Screen

To do this:

Change the hour

and minutes.

Toggle between

One-time Alarm

and Daily Alarm.

Do this:

Use ).D (+) and B (–

•With the 12-hour format, set the time correctly as

a.m. or p.m. ( indicator).PM

Press .D

One-time Alarm on:

Daily Alarm on:

Seconds

1/10 second

Hours Minutes

Hourly time signal

on indicator

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	AE-1000WD-1AVEF
Vægt:	40 g
Dimensioner (BxDxH):	43.7 x 13.7 x 48.1 mm
Armbånd, materiale:	Rustfrit stål
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Timer:	1/1s - 24h
Batterilevetid:	10 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR2025
Antal understøttede batterier:	1
Alarmfunktion:	Ja
Vandbestandig dybde:	100 m
Nøjagtighed:	±30 sek/md
Verdenstid funktkon:	Ja