Casio AE-1500WH-5AVEF Manual

Casio Ur AE-1500WH-5AVEF

Læs gratis den danske manual til Casio AE-1500WH-5AVEF (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Casio AE-1500WH-5AVEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3502

E-9

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms has a snooze feature.

You can also turn on an Hourly Time Signal that causes

the watch to beep every hour on the hour.

x There are five alarms numbered 1 5 through . The

Hourly Time Signal screen is indicated by :00.

x All of the operations in this section are performed

in the Alarm Mode, which you enter by pressing C

(page E-4).

Alarm date

(Month – Day)

Alarm time

(Hour : Minutes)

Alarm number

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-7

3. When the setting you want to change is flashing, press to change it as D

described below.

To change this setting Perform this button operation

Seconds Press to reset to D00.

Hour, Minutes, Year, Month, Day Press to increase the setting.D

x Pressing D while the seconds are in the range of 30 to 59 resets them to 00

and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press to exit the setting screen.A

x The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be

no reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press to move the flashing in the sequence shown C

below to select other settings.

C C

Seconds Hour Minutes

Day YearMonth

C C

Hour : Minutes

Seconds

Month – Day

Day of week

PM indicator

E-5

Countdown Timer

Mode

C C

Stopwatch Mode Dual Time Mode

x In any mode, hold down for about one second to return to the Timekeeping C

Mode.

E-4

General Guide

x Press C to change from mode to mode.

x In any mode, press B to illuminate the display.

Timekeeping Mode Alarm Mode

C C

E-3

To set the Dual Time .............................................................................................E-21

To turn on the backlight .......................................................................................E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date ......................................................................................... E-6

To toggle between 12-hour and 24-hour timekeeping ........................................E-8

To set an alarm time .............................................................................................E-11

To test the alarm ...................................................................................................E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off .................E-14

To select the operation of Alarm 1 ......................................................................E-15

To use the countdown timer ................................................................................ E-16

To set the countdown start time .........................................................................E-17

To turn auto-repeat on and off ............................................................................E-18

To measure times with the stopwatch ................................................................E-20

E-1

Contents

General Guide ..........................................................................................................E-4

Timekeeping ............................................................................................................E-6

Alarms.......................................................................................................................E-9

Countdown Timer ..................................................................................................E-16

Stopwatch .............................................................................................................. E-19

Dual Time ...............................................................................................................E-21

Backlight ................................................................................................................E-22

Reference ...............................................................................................................E-23

Specifications ........................................................................................................E-25

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light igures on a dark background. All sample displays f

in this manual are shown using dark igures on a light f

background.

x Button operations are indicated using the letters shown

in the illustration.

x Each section of this manual provides you with the

in ormation you need to perf form operations in each

mode. Further details and technical information can be

f found in the “Re erence” section.

Operation Guide 3502

E-19

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

x The display range of the stopwatch is 23 hours,

59minutes, 59.99 seconds.

x The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

x An ongoing elapsed time measurement operation

will continue internally even if you change to another

mode. However, if you exit the Stopwatch Mode while

a split time is displayed, the split time will not be

displayed when you return to the Stopwatch Mode.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

Seconds

Minutes

Hours

1/100 second

E-18

To turn auto-repeat on and off

1. In the Countdown Timer Mode, hold down until the A

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press to toggle auto-repeat on ( displayed) BA.RPT

and off ( not displayed).A.RPT

x Note that pressing B in the above operation also

turns on the backlight.

x When the end of the countdown is reached while auto-

repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You

can stop the countdown by pressing D and manually

reset to the start time by pressing A.

x The auto-repeat indicator appears in the Countdown

Timer Mode only.

Auto-repeat indicator

E-17

x The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

x Press while a countdown operation is in progress to pause it. Press D D

again to resume the countdown.

x To completely stop a countdown operation, first pause it (by pressing D), and

then press . This returns the countdown time to its starting value.A

To set the countdown start time

1. In the Countdown Timer Mode, hold down until the A

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press to move the flashing between the hours and C

minutes settings.

3. While a setting is flashing, use to increase it.D

x To set the starting value of the countdown time to

24 hours, set 0:00.

4. Press to exit the setting screen.A

E-16

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

x You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

x All of the operations in this section are performed

in the Countdown Timer Mode, which you enter by

pressing C (page E-5).

To use the countdown timer

Press while in the Countdown Timer Mode to start the D

countdown timer.

x When the end of the countdown is reached and auto-repeat is turned off, the

alarm sounds for 10 seconds or until you stop it by pressing any button. The

countdown time is automatically reset to its starting value after the alarm stops.

Seconds

Minutes

Hours

E-15

To select the operation of Alarm 1

1. In the Alarm Mode, use to select Alarm .D1

2. Press to cycle through the available settings in the sequence shown below.A

Snooze on indicator (SNZ) and Alarm 1 on indicator

A A A

Snooze

alarm on

Alarm on Alarm off

x The snooze on indicator ( ) and Alarm on indicator are displayed in all SNZ 1

modes.

x The snooze on indicator (SNZ) flashes during the 5-minute intervals between

alarms.

x The alarm indicator (Alarm 1 on and/or snooze on) flashes while the alarm is

sounding.

E-14

To turn Alarms 2 through 5 and the Hourly Time Signal on and off

1. In the Alarm Mode, use to select alarm number D2

through , or the Hourly Time Signal ( ).5 :00

2. Press to toggle it on and off.A

x The on/off status of Alarms and the Hourly 2 5 through

Time Signal is shown by indicators.

x The alarm on indicators and Hourly time Signal on

indicator are displayed in all modes.

x While an alarm is sounding, the applicable alarm on

indicator flashes on the display.

Hourly time signal

on indicator

Alarm on indicator

E-13

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode

the watch is in. In the case of the snooze alarm, the alarm operation is performed a

total of seven times, every five minutes, until you turn the alarm off or change it to a

one-time alarm (page E-14).

x To stop the alarm tone after it starts to sound, press any button.

x Performing any one of the following operations during a 5-minute interval

between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-6)

Displaying the alarm 1 setting screen (page E-11)

To test the alarm

x In the Alarm Mode, hold down D to sound the alarm.

E-12

3. Press to move the flashing in the sequence shown below to select other C

settings.

Hour Minutes Day

C C

Month

4. While a setting is flashing, press to increase it.D

x To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set – for the month. Press until the mark appears (between 12 and 1) D–

while month setting is flashing.

x To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set

– – – – for the day. Press D until the mark appears (between the end of the

month and 1) while the day setting is flashing.

x When setting the alarm time using the 12-hour format, take care to set the

time correctly as a.m. or p.m. (P indicator).

5. Press to exit the setting screen.A

E-11

To set an alarm time

1. In the Alarm Mode, use to scroll through the alarm D

screens until the one whose time you want to set is

displayed.

D D

–1 –2 –3

:00 –4–5

D D

x Alarm 1 has a snooze feature.

x The snooze alarm operation repeats every five minutes.

2. After you select an alarm, hold down until the hour setting of the alarm time A

starts to flash, which indicates the setting screen.

x This operation automatically turns on the alarm.

E-10

Alarm Types

The alarm type is determined by the settings you make, as described below.

x Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

x Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

x 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

x Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the

alarm to sound every month at time you set, on the day you set.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	AE-1500WH-5AVEF
Bredde:	51.21 mm
Dybde:	15.73 mm
Højde:	54.4 mm
Vægt:	57 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	10 År
LED-baggrundsbelysning:	Ja
Antal understøttede batterier:	1
Urets glastype:	Akryl
Alarmfunktion:	Ja
Snooze funktion:	Ja
Produktdesign:	Casual
Se opkaldstype:	LCD-skive
Vandbestandigt tryk:	10 ATM
Husets farve:	Grøn
Båndets hovedfarve:	Grøn
Etui form:	Rund
Kalendertype:	Date, Day, Month
Kasse hovedfarve:	Grøn