Casio AQ-230EGG-2AEF Manual

Casio Ur AQ-230EGG-2AEF

Læs gratis den danske manual til Casio AQ-230EGG-2AEF (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Casio AQ-230EGG-2AEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation Guide 5154

E-13

Dual Time Mode

The Dual Time function lets you set a second digital time

that operates independently of the current analog and digital

times. This means you can keep track of time in another

time zone.

To set the Dual Time

In the Dual Time Mode, hold down 1. until the hour digits C

start to ﬂ ash on the display. The hour digits ﬂ ash because

they .are selected

Press 2. to change the selection in the following C

sequence.

12/24-Hour Format

MinutesHour

Dual Time Mode

SecondsHour

Minutes

Mode indicator

E-12

While the Daily Alarm/Hourly Time Signal setting is selected, press 4. to change B

the status in the following sequence.

Alarm On Indicator/Hourly Time Signal On Indicator

BBB

Both On Both Off Daily Alarm only Hourly Time

Signal only

After you conﬁ gure your alarm setting, press 5. to select the Alarm Mode.C

If you do not operate any button for a few minutes while a selection is ﬂ ashing, x

the ﬂ ashing stops and the watch goes back to the Timekeeping Mode screen

automatically.

To test the alarm

Hold down in any mode to sound the alarm. Note that pressing also changes B B

the mode.

E-11

Press 2. to change the selection in the following sequence.C

Minutes (tens digit)

Alarm/Hourly Time Signal

Minutes (ones digit)

Hour

Alarm Mode

Once you reach the Alarm Mode screen, you have to hold down xC again to

display the ﬂ ashing hour.

Press 3. to increase the selected digits. Holding down changes the selection B B

at high speed.

The format (12-hour or 24-hour) of the alarm time matches the format you select x

for digital timekeeping.

When setting the alarm time using the 12-hour format, take care to set the time x

correctly as a.m. (no indicator) or p.m. (PM indicator).

E-10

Alarm Mode

While the Daily Alarm function is switched on, the alarm

sounds for 20 seconds at the preset time each day. Press

any button to stop the alarm after it starts to sound. When

the Hourly Time Signal is switched on, the watch beeps

every hour on the hour. Note that the Daily Alarm and

the Hourly Time Signal operate based on the digital time

setting.

To set the alarm time

In the Alarm Mode, hold down 1. until the hour digits C

start to ﬂ ash on the display. The hour digits ﬂ ash

because they .are selected

Mode indicator

Hour Minutes

Alarm on indicator

Hourly Time Signal on

indicator

E-9

While the month or day digits are selected (ﬂ ashing), press 3. to increase the B

number. While the day of the week is selected, pressing advances to the next B

day of the week. Holding down changes the current selection at high speed.B

After you set the date, press 4. to display the Date Indicator Mode screen.C

The watch does not make any allowance for leap years. Be sure to manually set x

February 29 (when one occurs) for the appropriate date.

If you do not operate any button for a few minutes while a selection is ﬂ ashing, the x

ﬂ ashing stops and the watch goes back to the Timekeeping Mode automatically.

E-8

Date Indicator Mode

To set the date

In the Date Indicator Mode, hold down 1. until the C

month digits start to ﬂ ash on the digital display. The

month digits ﬂ ash because they .are selected

Press 2. to change the selection in the following C

sequence.

Day Day of the

week

Month

CDate Indicator

Mode

Once you reach the Date Indicator Mode screen, you x

have to hold down again to display the ﬂ ashing C

month.

Day of the weekMonth

Day

E-7

While the seconds digits are selected (ﬂ ashing), press 3. to reset the seconds to B

“00”. If you press while the second count is in the range of 30 to 59, it is reset to B

“00” and 1 is added to the minutes. If the second count is in the range of 00 to 29,

the minute count is unchanged.

While any other digits (besides seconds) are selected (ﬂ ashing), press 4. to B

increase the number. Holding down changes the current selection at high B

speed. While the 12/24 hour setting is selected, press to switch between the B

two formats.

After you set the time and format, press 5. to display the Timekeeping Mode C

screen.

If you do not operate any button for a few minutes while a selection is ﬂ ashing, x

the ﬂ ashing stops and the watch goes back to the Timekeeping Mode screen

automatically.

To set the analog time

When in any mode, press to advance the analog time setting.A

Hold down advances the analog setting at high speed. You can only advance the A

setting and cannot reverse it.

E-6

Timekeeping Mode

To set the digital time

In the Timekeeping Mode, hold down 1. until the C

seconds digits start to ﬂ ash on the digital display.

The seconds ﬂ ash because they .are selected

Press 2. to change the selection in the following C

sequence.

Hour

12/24-Hour Format

Minutes

Seconds

Timekeeping Mode

Once you reach the Timekeeping Mode screen, you x

have to hold down again to display the ﬂ ashing C

seconds.

Hour hand

Minute hand

Seconds

Hour

Minutes

PM indicator

E-5

General Guide

Press xB to change from mode to mode. Each mode is explained in detail on the

following pages.

Timekeeping Mode Date Indicator Mode Alarm Mode

Dual Time ModeStopwatch Mode

B B

MA1202-EA

#!3)/#/-054%2#/,4$

Operation Guide 5154

E-16

Speciﬁ cations

Accuracy at normal temperature: ±30 seconds a month

Timekeeping Mode x

Analog: Hour, minute

Digital: Hour, minutes, seconds, pm (P)

Time system: Switchable between 12-hour and 24-hour formats

Date Indicator Mode: Month, day, day of the week x

Calendar system: Auto-calendar set at 28 days for February

Alarm Mode: Daily alarm, hourly time signal x

Dual Time Mode x

Stopwatch Mode x

Measuring capacity: 59 minutes 59.99 seconds

Measuring unit: 1/100 of a second

Measuring modes: Elapsed time, cumulative elapsed time

Battery: One silver oxide battery (Type: SR920W)

Approximately 3 years on type SR920W (assuming alarm operation 20 sec/day)

E-15

Stopwatch Mode

The Stopwatch Mode measures elapsed time and

cumulative elapsed time. The range of the stopwatch is

59 minutes, 59.99 seconds.

To measure elapsed time

Press 1. to start the stopwatch.C

Press 2. to stop the stopwatch.C

Hold down 3. until the stopwatch is cleared to “00:00 00”.C

To measure cumulative elapsed time

Press 1. to start the stopwatch.C

Press 2. to stop the stopwatch.C

Press 3. again to resume timing from the time shown on C

the display. You can repeat steps 2 and 3 as many times

as you like.

Hold down 4. until the stopwatch is cleared to “00:00 00”.C

1/100 second

Minutes

Seconds

Mode indicator

E-14

Once you reach the Dual Time Mode screen, you have to hold down xC again to

display the ﬂ ashing hour.

Press 3. to increase the selected digits. Holding down changes the selection at B B

high speed. While the 12/24-hour setting is selected, press to switch between B

the two formats.

After you set the time, press 4. to select the Dual Time Mode.C

If you do not operate any button for a few minutes while a selection is ﬂ ashing, x

the ﬂ ashing stops and the watch goes back to the Timekeeping Mode screen

automatically.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	AQ-230EGG-2AEF
Bredde:	29.8 mm
Dybde:	8.1 mm
Højde:	38.8 mm
Vægt:	47 g
Armbånd, materiale:	Rustfrit stål
Vandfast:	Ja
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
Urets glastype:	Akryl
Alarmfunktion:	Ja
Produktdesign:	Casual
Mekanismetype:	Kvarts
Se opkaldstype:	Analog & LCD-opkald
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rektangulær
Hovedfarve på urskive:	Blå
Se markørfarve:	Sort
Køn:	Hanstik
Antal tidszoner:	2
Tidzoner:	Ja
Stopurets nøjagtighed:	0.01 sek./side
Kalendertype:	Dag
Se markørstil:	Ingen nummer-visning