Casio Baby-G BGA-150KT-4BER Manual

Casio Ur Baby-G BGA-150KT-4BER

Læs gratis den danske manual til Casio Baby-G BGA-150KT-4BER (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Casio Baby-G BGA-150KT-4BER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Operation Guide 5257

E-9

Hour :

Minutes

Day of week Month – Day PM indicator Seconds

Day of the Week Month – Day Hour : Minutes

E-8

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time (page E-11) and analog time (page E-15) are different.

•In the Timekeeping Mode, you can press to change the display format as shownD

below.

E-7

Stopwatch Mode Alarm Mode Hand Setting Mode

E-6

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Timekeeping Mode World Time Mode Countdown Timer Mode

E-5

To test the alarm ................................................................................................... E-29

To turn an alarm on and off ................................................................................. E-30

To turn the Hourly Time Signal on and off .........................................................E-31

To turn on illumination ......................................................................................... E-32

To specify the illumination duration ................................................................... E-33

E-4

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the digital time and date ........................................................................... E-11

To toggle the Timekeeping Mode digital time

between DST and Standard Time .................................................................... E-14

To adjust the analog time .....................................................................................E-15

To view the time in another city .......................................................................... E-17

To toggle a city code time

between Standard Time and Daylight Saving Time ....................................... E-18

To configure the countdown timer ......................................................................E-22

To use the countdown timer ................................................................................E-24

To measure times with the stopwatch ................................................................E-26

To set an alarm time ............................................................................................. E-28

E-3

Contents

General Guide ......................................................................................................... E-6

Timekeeping ............................................................................................................ E-8

World Time ............................................................................................................ E-17

Countdown Timer ................................................................................................. E-19

Stopwatch .............................................................................................................. E-25

Alarms .................................................................................................................... E-27

Illumination ............................................................................................................ E-32

Reference .............................................................................................................. E-34

Specifications ....................................................................................................... E-38

E-2

•Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background.

All sample displays in this manual are shown using dark

figures on a light background.

For indicators, “On” is indicated by a dark indicator on

the positive (dark-on-light) display, and by a light

indicator on the negative (light-on-dark) display.

[Positive]

[Negative]

E-1

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

MA1110-EA

Operation Guide 5257

E-19

Countdown Timer

The countdown timer can be set within a range of one

minute to 60 minutes. An alarm sounds when the

countdown reaches zero. The countdown timer also has

an auto-repeat feature and a progress beeper that signals

the progress of the countdown.

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-6).

Configuring the Countdown Timer

The following are the settings you should configure before

actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress

beeper on/off

•See “To configure the countdown timer” on page E-22

for information about setting up the timer.

Seconds Minutes

E-18

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

whose Standard Time/Daylight Saving Time setting you

want to change.

2. Hold down A for about two seconds to toggle between

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

•The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

•Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

•Note that you cannot switch between Standard Time

and Daylight Saving Time while GMT is selected as the

city code.

DST indicator

E-17

World Time

World Time digitally displays the current time in 27 cities

(29 time zones) around the world.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C

(page E-6).

To view the time in another city

In the World Time Mode, press to scroll eastwardlyD

through city codes.

•For full information about city codes, see the “City Code

Table” at the back of this manual.

•If the current time shown for a city is wrong, it probably

means there is a problem with your Timekeeping Mode

time and/or Home City code settings. Go to the

Timekeeping Mode and make the necessary

adjustments.

City code

Current time for the

selected city code

E-16

•If you need to advance the analog time setting a long way, hold down until theD

time starts advancing at high speed, and then press . This locks the high-B

speed hand movement, so you can release the two buttons. High-speed hand

movement continues until you press any button. It will also stop automatically

after the time advances 12 hours or if an alarm (daily alarm, Hourly Time Signal,

or countdown beeper) starts to sound.

4. Press A to exit the setting screen.

•The watch will automatically adjust the minute hand slightly to match its internal

second count when you exit the setting screen.

•To return to the Timekeeping Mode, press C.

E-15

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not

match the time of the digital display.

To adjust the analog time

1. In the Timekeeping Mode, press C five times to enter

the Hand Setting Mode (page E-7).

2. Hold down A until the current digital time starts to

flash, which indicates the analog setting screen.

3. Press D to advance the analog time setting by

20 seconds.

•Holding down advances the analog time setting atD

high speed.

E-14

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the seconds

start to flash, which indicates the setting screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time (

OF displayed).

4. Press A to exit the setting screen.

•The DST indicator appears on the Timekeeping, Alarm,

and Hand Setting Mode to indicate that Daylight Saving

Time is turned on.

DST indicator

E-13

5. Press A to exit the setting screen.

•Resetting the seconds only (without changing the DST, Home City code, hour, or

minute setting) causes the analog minute hand setting to be adjusted automatically.

•See “Digital Time Daylight Saving Time (DST) Setting” below for details about the

DST setting.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

•For details about illumination duration, see “Illumination” on page E-32.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-12

4. When the setting you want to change is flashing, use B and D to change it as

described below.

Screen To do this:

Reset the seconds to 00

Toggle between Daylight Saving Time (

ON) and

Standard Time (OF

)

Change the Home City code

Change the hour or minutes

Toggle between 12-hour ( ) and 24-hour12H

(24H) timekeeping

Change the year

Change the month or day

Select one second ( ) or three seconds ( ) as

the illumination duration

Do this:

Press .D

Use D (east) and B (west).

Use D (+) and B (–).

Press .D

Use D (+) and B (–).

Press .D

E-11

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to move the flashing to the Home City

code setting (see the illustration below), and then use

B D and to select the code you want.

•Make sure you select your Home City code before

changing any other setting.

•For full information on city codes, see the “City Code

Table” at the back of this manual.

3. Press C to move the flashing in the sequence shown below to select the other settings.

Seconds DST Home City Code Hour Minutes

Day Month Year 12/24-Hour FormatIllumination Duration

E-10

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date.

When setting the digital time, you can also configure settings for summer time

(Daylight Saving Time or DST), your Home City code (the code for the city where you

normally use the watch), the 12/24-hour format, and the illumination duration.

•This watch is preset with a number of city codes, each of which represents the time

zone where that city is located. When setting the digital time, it is important that you

select the correct city code for your Home City. If your location is not included in the

preset city codes, select the preset city code that is in the same time zone as your

location.

•Note that all of the times for the World Time Mode city codes (page E-17) are

displayed in accordance with the digital time and date settings you configure in the

Timekeeping Mode.

•After you correctly set your Home City time and date, you can set the watch up for

timekeeping with a different city code simply by changing the Home City code in the

Timekeeping Mode.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G BGA-150KT-4BER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BGA-150KT-4BER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025