Casio Baby-G BGD-180 Manual

Casio Ur Baby-G BGD-180

Læs gratis den danske manual til Casio Baby-G BGD-180 (7 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Casio Baby-G BGD-180, eller vil du spørge andre brugere om produktet?

Side 1/7
Operation Guide 3429
MO1402-EA © 2014 CASIO COMPUTER CO., LTD.
E
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
E-1
ENGLISH
Warning !
The measurement functions built into this watch are not intended for use in
taking measurements that require professional or industrial precision. Values
produced by this watch should be considered as reasonably accurate
representations only.
The longitude, lunitidal interval, moon age and tide graph data that appear on
the display of this watch are not intended for navigation purposes. Always use
proper instruments and resources to obtain data for navigation purposes.
This watch is not an instrument for calculating low tide and high tide times. The
tide graph of this watch is intended to provide a reasonable approximation of
tidal movements only.
E-2
About This Manual
Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
E-3
Contents
About This Manual …………………………………………………………………… E-2
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To set the time and date ……………………………………………………… E-9
To toggle between 12-hour and 24-hour timekeeping ………………………E-12
To toggle the Timekeeping Mode time between DST
and Standard Time …………………………………………………………E-13
To con gure Home Site data …………………………………………………E-15
Tide/Moon Data …………………………………………………………………………E-17
To specify a date ………………………………………………………………E-19
World Time ………………………………………………………………………………E-21
To view the time in another city ………………………………………………E-22
To toggle a city code time between Standard Time
and Daylight Saving Time …………………………………………………E-22
E-4
Stopwatch ………………………………………………………………………………E-23
To measure times with the stopwatch ………………………………………E-24
To use Auto-Start ………………………………………………………………E-25
Countdown Timer………………………………………………………………………E-26
To con gure the countdown timer ……………………………………………E-29
To use the countdown timer ……………………………………………………E-31
Alarms ……………………………………………………………………………………E-32
To set an alarm time ……………………………………………………………E-34
To test the alarm ………………………………………………………………E-36
To turn an alarm on and off ……………………………………………………E-37
To turn the Hourly Time Signal on and off ……………………………………E-38
Illumination ……………………………………………………………………………E-39
To illuminate the display ………………………………………………………E-39
To specify the illumination duration……………………………………………E-40
E-5
Reference ………………………………………………………………………………E-41
To turn Flash Alert on and off …………………………………………………E-44
To turn the button operation tone on and off …………………………………E-45
Specifi cations …………………………………………………………………………E-49
E-6
General Guide
Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press
B to illuminate
the display.
Timekeeping Mode
Press .
Timekeeping Mode
Press .
E-7
Stopwatch Mode
World Time ModeTide/Moon Data Mode
Countdown Timer ModeAlarm Mode Stopwatch Mode
World Time ModeTide/Moon Data Mode
Countdown Timer ModeAlarm Mode
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
The tide graph (page E-42) shows tidal movements for
the current date in accordance with the current time as
kept in the Timekeeping Mode.
Important!
Be sure to configure the current time and date, and
your Home Site data (data for the site where you use
the watch) correctly before using the functions of this
watch. See “Home Site Data” (page E-13) for more
information.
Day of week
Tide graph
PM indicator Month – Day
Hour : Minutes Seconds
Day of week
Tide graph
PM indicator Month – Day
Hour : Minutes Seconds
E-9
Setting the Time and Date
This watch is preset with UTC differential values that represent each time zone
around the globe. Before setting the time, be sure to set the UTC differential for your
Home Site first, which is the location where you normally will be using the watch.
Note that World Time Mode times (page E-21) are all displayed based on the time
and date settings you configure in the Timekeeping Mode.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
Be sure to configure the correct UT C differential
for your Home Site before configuring any other
Timekeeping Mode settings.
See theUTC Differential/City Code List at the
back of this manual for information about the UTC
differential settings that are supported.
SecondsSeconds
Operation Guide 3429
E-10
2. Press C to move the flashing in the sequence shown below to select other
settings.
Seconds DST UTC
Differential MinutesHour
Flash Alert Day Month Year
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen To do this: Do this:
Reset the seconds to Press D.
Toggle between Daylight Saving Time ( )
and Standard Time ( ) Press D.
E-11
Screen To do this: Do this:
Specify the UTC differential Use
D (+) and B (–).
Change the hour or minutes Use
D (+) and B (–).
Change the year, month, or day Use
D (+) and B (–).
See “Daylight Saving Time (DST) Setting” (page E-12) for details about the DST
setting.
The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.
When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in
0.5-hour units.
For information about Flash Alert, see “Flash Alert (page E-44).
4. Press A twice to exit the setting screen.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
E-12
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
With the 12-hour format, the P (PM) indicator appears to the left of the hour digits
for times in the range of noon to 11:59 p.m. and no indicator appears to the left of
the hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-13
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time
( displayed) and Standard Time ( displayed).
4. Press A twice to exit the setting screen.
The DST indicator appears on the Timekeeping,
and Tide/Moon Data screens to indicate that
Daylight Saving Time is turned on. In the case of the
Tide/Moon Data Mode, the DST indicator appears
on the Tide Data screen only.
Home Site Data
Moon age, tide graph data, and Tide/Moon Data Mode data will not be displayed
properly unless Home Site data (UTC differential, longitude and lunitidal interval) is
configured correctly.
On/Off status
DST indicator
On/Off status
DST indicator
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-14
The lunitidal interval is the time elapsing between the Moon’s transit over a meridian
and the next high tide at that meridian. See “Lunitidal Interval” (page E-43) for more
information.
This watch displays lunitidal intervals in terms of hours and minutes.
The “Site/Lunitidal Interval Data List” at the back of this manual provides UTC
differential and longitude information around the world.
The following is the initial factory default Home Site data (Tokyo, Japan) when you
first purchase the watch and whenever you have the battery replaced. Change
these settings to match the area where you normally use the watch.
UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours, 20
minutes)
E-15
To configure Home Site data
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to display the UTC differential setting
screen, and confirm that the setting is correct.
If the UTC differential setting is not correct, use D
(+) and B (–) to change it.
3. Press A to display the longitude value setting screen.
4. Press C to move the flashing in the sequence shown
below to select other settings.
Lunitidal Interval
Hours
Lunitidal Interval
Minutes
Longitude
(East/West)
Longitude
Value
Longitude (East/West)
Longitude value
Longitude (East/West)
Longitude value
E-16
5. While the setting you want to change is flashing, use D and B to change it as
described below.
Setting Screen Button Operations
Longitude Value
Use D (+) and B (–) to change the setting.
You can specify a value from 0° to 180°, in
1-degree units.
Longitude
(East/West)
Use D to switch between east longitude ( ) and
west longitude ( ).
Lunitidal Interval
Hours, Minutes Use D (+) and B (–) to change the setting.
6. Press A to exit the setting screen.
E-17
Tide/Moon Data
Tide/Moon data lets you view the moon age for a
particular date, and tidal movements for a particular date
and time for your Home Site.
When you enter the Tide/Moon Data Mode, the data for
6:00 a.m. on the current date appears first.
If you suspect that the Tide/Moon data is not correct for
some reason, check the Timekeeping Mode data
(current time, date, and Home Site settings), and make
changes as required.
See “Tide Graph” (page E-42) for information about the
tide graph.
All of the operations in this section are performed in the
Tide/Moon Data Mode, which you enter by pressing C
(page E-7).
Tide graph
Month – Day
Time
Tide graph
Month – Day
Time
E-18
Tide/Moon Data Screens
In the Tide/Moon Data Mode, press A to toggle between the Tide Data screen and
the Moon Data screen.
Tide Data Screen Moon Data Screen
Tide graph
Moon ageMonth – DayTime
Press .
E-19
While the Tide Data screen is displayed, press
D to advance to the next hour.
While the Moon Data screen is displayed, press D to advance to the next day.
You also can specify a particular date (year, month, day) to view its tide data and
moon data. See “To specify a date” for more information.
When you enter the Tide/Moon Data Mode, the screen (tide data or moon data) that
was displayed the last time you exited the mode appears first.
To specify a date
1. In the Tide/Moon Data Mode, hold down
A until the
year setting starts to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Month DayYear
Month – DayYear Month – DayYear
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l


Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: Baby-G BGD-180

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BGD-180 stil et spørgsmål nedenfor, og andre brugere vil svare dig