Casio Baby-G BGD-525F-6ER Manual

Casio Ur Baby-G BGD-525F-6ER

Læs gratis den danske manual til Casio Baby-G BGD-525F-6ER (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Casio Baby-G BGD-525F-6ER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Operation Guide 3290

E-9

4. Press to exit the setting screen.A

x Resetting the seconds to while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to without changing the minutes.

x With the 12-hour format, the (PM) indicator appears on the display for times in the P

range of noon to 11:59 p.m. and the (AM) indicator appears for times in the range A

of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

x The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

E-8

3. When the setting you want to change is ﬂ ashing, use and to change it as D B

described below.

Screen To do this: Do this:

Reset the seconds to Press .D

Change the city code Use (east) and (west). D B

Toggle between Daylight Saving Time ( )

and Standard Time ( ) Press .D

Change the hour or minutes Use (+) and (–). D B

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping Press .D

Change the year, month, or day Use (+) and (–).D B

x See “Daylight Saving Time (DST)” (page E-10) for details about the DST setting.

E-7

To set the time and date

1. In the Timekeeping Mode, hold down until the A

seconds start to ﬂ ash, which indicates the setting

screen.

2. Press to move the ﬂ ashing in the sequence shown C

below to select other settings.

Seconds City Code

Day

Minutes

12/24-Hour Format

DST Hour

Month Year

C C C C

CCC

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Read this before you set the time and date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a city code for your Home City (the city where you

normally use the watch) before you set the time and date.

x To view the current Home City code setting, press A

while in the Timekeeping Mode.

x For full information on city codes, see the “City Code

Table” at the back of this manual.

Seconds

Hour : Minutes

PM indicator

Day of week

Day

E-5

C C

Stopwatch Mode Countdown Timer Mode Alarm Mode

E-4

General Guide

x Press to change from mode to mode.C

x In any mode (except when a setting screen is on the display), press to illuminate B

the display.

Timekeeping Mode

World Time Mode

E-3

To illuminate the display .......................................................................................E-23

To specify the illumination duration ...................................................................E-23

To turn the button operation tone on and off .....................................................E-24

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date .........................................................................................E-7

To toggle the Timekeeping Mode time between DST and Standard Time .......E-10

To view the time in another city code ..................................................................E-11

To toggle a city code time between Standard Time

and Daylight Saving Time .................................................................................E-12

To measure times with the stopwatch .................................................................E-14

To use the countdown timer .................................................................................E-15

To set the countdown start time ..........................................................................E-16

To set an alarm time ..............................................................................................E-18

To test the alarm ....................................................................................................E-19

To turn an alarm on and off ..................................................................................E-20

To turn the Hourly Time Signal on and off ..........................................................E-21

E-1

Contents

General Guide ..........................................................................................................E-4

Timekeeping .............................................................................................................E-6

World Time .............................................................................................................E-11

Stopwatch ..............................................................................................................E-13

Countdown Timer ..................................................................................................E-15

Alarms ....................................................................................................................E-17

Illumination ............................................................................................................E-22

Reference ...............................................................................................................E-24

Speciﬁ cations ........................................................................................................E-27

About This Manual

x All of the displays in this manual show black-on-white.

x Button operations are indicated using the letters shown

in the illustration.

x Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Operation Guide 3290

E-19

4. While a setting is ﬂ ashing, use (+) and (–) to change it.D B

x When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. ( indicator) or p.m. ( indicator).A P

5. Press to exit the setting screen.A

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every ﬁ ve minutes, or until you turn the alarm off (page E-20).

x To stop the alarm tone after it starts to sound, press any button.

x Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-7)

Displaying the setting screen (page E-18)

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-18

To set an alarm time

1. In the Alarm Mode, use to scroll through the alarm D

screens until the one whose time you want to set is

displayed.

x To set a one-time alarm, display one of the screens indicated by an alarm number

from through . To set the snooze alarm, display the screen indicated

by .

x The snooze alarm repeats every ﬁ ve minutes.

2. After you select an alarm, hold down until the hour setting of the alarm time A

starts to ﬂ ash, which indicates the setting screen.

x This operation turns on the alarm automatically.

3. Press to move the ﬂ ashing between the hour and minute settings.C

E-17

Alarms

You can set ﬁ ve independent Daily Alarms. When an alarm

is turned on, the alarm tone sounds when the alarm time

is reached. One of the alarms is a snooze alarm, while the

other four are one-time alarms.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

x There are six screens in the Alarm Mode. Four are

for one-time alarms (indicated by numbers from

through ), one is for a snooze alarm (indicated by

), and one is for the Hourly Time Signal (indicated

by ).

x All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing (page E-5).C

Alarm number

Alarm time

(Hour : Minutes)

On/Off status

E-16

x Press while a countdown operation is in progress to pause it. Press again to D D

resume the countdown.

x To completely stop a countdown operation, ﬁ rst pause it (by pressing ), and then D

press . This returns the countdown time to its starting value.A

To set the countdown start time

1. In the Countdown Timer Mode, hold down until the A

hours of the countdown start time start to ﬂ ash, which

indicates the setting screen.

2. Press to move the ﬂ ashing between the hours and C

minutes.

3. While a setting is ﬂ ashing, use (+) or (–) to D B

change it.

x To set the starting value of the countdown time to

24 hours, set .

4. Press to exit the setting screen.A

E-15

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

x The countdown operation continues even if you exit the

Countdown Timer Mode.

x All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-5).

To use the countdown timer

Press while in the Countdown Timer Mode to start the D

countdown timer.

x When the end of the countdown is reached, the alarm

sounds for 10 seconds or until you stop it by pressing any

button. The countdown time is automatically reset to its

starting value after the alarm stops.

Hours

Minutes

Seconds

E-14

To measure times with the stopwatch

Elapsed Time

DDDDA

Start Stop Re-start Stop Clear

Split Time

D A A D A

Start Split

( displayed)

Split release Stop Clear

Two Finishes

D A D A A

Start Split

First runner

ﬁ nishes. Display

time of ﬁ rst runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Clear

E-13

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two ﬁ nishes.

x The display range of the stopwatch is 59 minutes,

59.99 seconds.

x The stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

x The stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

x Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to elapsed

time measurement.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

Minutes

Seconds

1/100 second

E-12

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use to display the city code D

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down for about one second to toggle between A

Daylight Saving Time ( indicator displayed) and DST

Standard Time ( indicator not displayed).DST

x The indicator is on the display whenever you display DST

a city code for which Daylight Saving Time is turned on.

x Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes are

not affected.

x In the World Time Mode, you can switch the city code

you currently have selected as your Timekeeping Mode

Home City between Standard Time and DST. The setting

you select in the World Time Mode will also be applied in

the Timekeeping Mode.

DST indicator

E-11

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

x All of the operations in this section are performed in

the World Time Mode, which you enter by pressing C

(page E-4).

To view the time in another city code

In the World Time Mode, press to scroll eastwardly D

through city codes.

x For full information about city codes, see the “City Code

Table” at the back of this manual.

x If the current time shown for a city is wrong, check your

Timekeeping Mode time and Home City code settings

and make the necessary changes.

City code

Current time in the zone of

the selected city code

E-10

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down until the A

seconds start to ﬂ ash, which indicates the setting

screen.

2. Press twice to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (D)

and Standard Time ( ).

4. Press to exit the setting screen.A

x The indicator is displayed on the Timekeeping Mode DST

and Alarm Mode screen while Daylight Saving Time is

turned on.

DST indicator

On/Off status

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G BGD-525F-6ER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BGD-525F-6ER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025