Casio Baby-G BGS-100-4AER Manual

Casio Ur Baby-G BGS-100-4AER

Læs gratis den danske manual til Casio Baby-G BGS-100-4AER (6 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Casio Baby-G BGS-100-4AER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Operation Guide 5510

E-9

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds

Day

DST Hour

Month

Minutes

Year

Seconds

E-8

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date. This watch features separate digital and

analog timekeeping. The procedures for setting the digital

time (page E-9) and analog time (page E-13) are different.

Setting the Digital Time and Date

Use the Timekeeping Mode to set and view a digital

display of the current time and date. When setting the

digital time, you also can configure settings for the

summer time (Daylight Saving Time or DST).

PM indicator

Minutes

Seconds

Month – Day

Day of week

Hours

E-7

Recall Mode

Dual Time Mode

Countdown Timer

Mode

Alarm Mode

E-6

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press

B to illuminate

the face of the watch.

Stopwatch Mode

Hand Setting Mode

Timekeeping Mode C

E-5

Illumination ……………………………………………………………………………E-41

To illuminate the display manually ……………………………………………E-41

To specify the illumination duration……………………………………………E-42

To turn the auto light switch on and off ………………………………………E-44

Reference ………………………………………………………………………………E-45

To turn the button operation tone on and off …………………………………E-46

Specifications …………………………………………………………………………E-51

E-4

Recall Mode ……………………………………………………………………………E-24

To recall stopwatch time records………………………………………………E-25

To delete a log …………………………………………………………………E-27

Countdown Timer………………………………………………………………………E-28

To use the countdown timer ……………………………………………………E-29

To configure countdown start time and auto-repeat settings ………………E-30

Alarms ……………………………………………………………………………………E-32

To set an alarm time ……………………………………………………………E-34

To test the alarm ………………………………………………………………E-36

To select the operation of Alarm ……………………………………………E-37

To turn Alarms and on and off ……………………………………………E-38

To turn the hourly time signal on and off ……………………………………E-38

Dual Time ………………………………………………………………………………E-39

To set the Dual Time ……………………………………………………………E-39

E-3

Contents

General Guide ………………………………………………………………………… E-6

Timekeeping …………………………………………………………………………… E-8

To set the digital time and date ……………………………………………… E-9

To toggle between 12-hour and 24-hour timekeeping ………………………E-11

To toggle the Timekeeping Mode digital time between DST and

Standard Time ………………………………………………………………E-12

To adjust the analog time ………………………………………………………E-13

Stopwatch ………………………………………………………………………………E-15

To measure elapsed time ………………………………………………………E-18

To measure elapsed time with lap times ……………………………………E-19

To measure elapsed time with split times ……………………………………E-20

E-2

• Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

E-1

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

Operation Guide 5510

E-19

To measure elapsed time with lap times

1. When the stopwatch display shows all zeros, press

A to display the lap time screen (indicated by /LAP).

2. Press D to start an elapsed time measurement.

• At the time, both the upper and lower displays will

show identical times.

3. Press A to record the time of the first lap.

• This freezes the current lap time in the upper part of

the digital display for about eight seconds, while

measurement of total elapsed time and the next lap

time continue internally. The lap number of the

displayed time appears in the lower digital display.

• After eight seconds, the ongoing elapsed time

measurement re-appears in the lower digital display.

4. Repeat step 3 to record more lap times.

5. Press D to stop the stopwatch.

Lap time

Elapsed time

E-18

More than 10 hours

More than one hour

Minutes

Seconds

1/100 second Hours

Minutes

Seconds

Minutes

Hours

Seconds

1/100 second Hours

Minutes

Seconds

To measure elapsed time

Note

• You can perform the following steps starting from either the lap time screen or the

split time screen.

1. Press D to start the stopwatch.

2. Press D again to stop the stopwatch.

• You can resume the measurement operation by pressing D

3. Press A to clear the stopwatch to all zeros.

E-17

• See “To measure elapsed time with lap times” (page E-19) and “To measure elapsed

time with split times” (page E-20) for more information about each type of measurement.

• You can perform elapsed time measurement starting from either the lap time screen

or the split time screen (page E-19 and E-20). Whenever you enter the Stopwatch Mode,

the screen (lap time or split time) that was displayed when you last exited the mode

will appear first.

• During a stopwatch elapsed time operation, the upper display initially shows

minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and

seconds when the time in the upper display exceeds 60 minutes.

• The lower display initially shows hours, minutes, seconds, and a 1/100-second

value. This changes to hours, minutes, and seconds when the time in the lower

display exceeds 10 hours.

E-16

• The stopwatch measurement operation continues even if you exit the Stopwatch

Mode.

• For information about how stopwatch times are stored in memory, see “Memory

Management” (page E-22).

Viewing the Stopwatch Digital Displays

The information that appears in the watch’s upper and lower digital displays depends

on whether you are measuring lap times or split times.

Lap Time Measurement

Upper Display: Lap time

Lower Display: Elapsed time

Split Time Measurement

Upper Display: Lap time

Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored

in memory.)

E-15

Stopwatch

The stopwatch lets you measure elapsed time, lap times,

and split times. Lap times and split times can be stored in

memory.

• The display range of the stopwatch is 99 hours,

59 minutes, 59 seconds.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing

(page E-6).

Note

• “Lap time” is the time spent to cover a specific segment

of a race, such as one lap around a track. “Split time” is

the time spent from the beginning of a race up to a

certain point.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

Minutes

Seconds

1/100

second

Hours

Remaining

free records

E-14

• High-speed hand movement will stop automatically after the time advances 12

hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts

to sound.

4. Press A to exit the setting screen.

• The minute hand will be adjusted slightly to match the seconds when you exit the

setting screen.

• To return to the Timekeeping Mode, press

E-13

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not

match the time of the digital display.

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode (page E-6).

2. Hold down A until the current digital time starts to

flash, which indicates the setting screen.

3. Use D to adjust the analog setting.

• Press D once to advance the hands 20 seconds.

• Hold down D to advance the hands at high speed.

• To lock high speed hands movement, hold down D to start it and then press B

to lock. The hands will continue to advance for one 12-hour cycle or until you

press any button to stop them.

E-12

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time ( displayed).

4. Press A to exit the setting screen.

• The DST

indicator appears on the Timekeeping,

Alarm, and Hand Setting Mode screens to indicate

that Daylight Saving Time is turned on.

On/Off status

DST indicator

E-11

4. Press A to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date

(year, month, and day) settings.

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits

for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the

left of the hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

• The A and P indicators are not displayed with the Timekeeping Mode time on the

Countdown Timer Mode and Dual Time Mode screens.

E-10

3. When the setting you want to change is flashing, use D and B to change it as

described below.

Screen: To do this: Do this:

Reset the seconds to Press D.

Toggle between Daylight Saving Time

( ) and Standard Time ( ) Press D.

Change the hour or minute Use

D (+) and B (–).

Change the year, month, or day Use

D (+) and B (–).

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G BGS-100-4AER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BGS-100-4AER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025