Casio BG-1006SA-4AER Manual

Casio Ur BG-1006SA-4AER

Læs gratis den danske manual til Casio BG-1006SA-4AER (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Casio BG-1006SA-4AER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Operation Guide 3188

E-9

With the 12-hour format, the xP (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x

applied in all modes.

The year can be set in the range of 2000 to 2099. x

The watch’s built-in full automatic calendar makes allowances for different month x

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

The day of the week is automatically displayed in accordance with the date (year, x

month, and day) settings.

E-8

Screen To do this: Do this:

Reset the seconds to Press D.

Change the city code Use D (east) and B (west).

Toggle between Daylight Saving Time ( ) and

Standard Time ( ) Press D.

Change the hour or minutes Use D (+) and B (–).

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping Press D.

Change the year, month, or day Use D (+) and B (–).

See “Daylight Saving Time (DST)” (page E-10) for details about the DST setting. x

Press 4. to exit the setting screen.A

Resetting the seconds to x while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to without changing the minutes.

E-7

To set the time and date

In the Timekeeping Mode, hold down 1. until the A

seconds start to ﬂ ash, which indicates the setting

screen.

Press 2. to move the ﬂ ashing in the sequence shown C

below to select other settings.

Seconds MinutesHourDSTCity Code

Day 12/24-Hour FormatYearMonth

When the setting you want to change is ﬂ ashing, use 3. and to change it as D B

described below.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Read this before you set the time and date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a city code for your Home City (the city where you

normally use the watch) before you set the time and date.

To view the current Home City code setting, press xA

while in the Timekeeping Mode.

For full information on city codes, see the “City Code x

Table” at the back of this manual.

PM indicator

Day of week

Day

Seconds

Hour : Minutes

E-5

Stopwatch Mode Countdown Timer Mode Alarm Mode

E-4

General Guide

Press xC to change from mode to mode.

In any mode, press xL to illuminate the display.

Timekeeping Mode World Time Mode

Press .C

E-3

To illuminate the display ....................................................................................... E-23

To specify the illumination duration .................................................................... E-23

To turn the button operation tone on and off ..................................................... E-24

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date ......................................................................................... E-7

To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10

To view the time in another city code .................................................................. E-11

To toggle a city code time

between Standard Time and Daylight Saving Time ........................................ E-12

To measure times with the stopwatch ................................................................. E-14

To use the countdown timer ................................................................................. E-15

To set the countdown start time .......................................................................... E-16

To set an alarm time .............................................................................................. E-18

To test the alarm .................................................................................................... E-19

To turn an alarm on and off .................................................................................. E-20

To turn the Hourly Time Signal on and off .......................................................... E-21

E-1

Contents

General Guide .......................................................................................................... E-4

Timekeeping ............................................................................................................. E-6

World Time ............................................................................................................. E-11

Stopwatch .............................................................................................................. E-13

Countdown Timer .................................................................................................. E-15

Alarms .................................................................................................................... E-17

Illumination ............................................................................................................ E-22

Reference ............................................................................................................... E-24

Speciﬁ cations ........................................................................................................ E-27

About This Manual

All of the displays in this manual show black-on-white. x

Button operations are indicated using the letters shown x

in the illustration.

Each section of this manual provides you with the x

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

MA1004-EB

Operation Guide 3188

E-19

Press 3. to move the ﬂ ashing between the hour and minute settings.C

While a setting is ﬂ ashing, use 4. (+) and (–) to change it.D B

When setting the alarm time using the 12-hour format, take care to set the time x

correctly as a.m. (indicator not displayed) or p.m. ( indicator).P

Press 5. to exit the setting screen.A

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every ﬁ ve minutes, or until you turn the alarm off (page E-20).

To stop the alarm tone after it starts to sound, press any button. x

Performing any one of the following operations during a 5-minute interval between x

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-7)

Displaying the snooze alarm setting screen (page E-18)

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-18

To set an alarm time

In the Alarm Mode, use 1. and to scroll through the D B

alarm screens until the one whose time you want to set

is displayed.

B D

B B

D B

D D

To set a one-time alarm, display one of the screens indicated by an alarm number x

from through . To set the snooze alarm, display the screen

indicated by .

The snooze alarm repeats every ﬁ ve minutes. x

After you select an alarm, hold down 2. until the hour setting of the alarm time A

starts to ﬂ ash, which indicates the setting screen.

This operation turns on the alarm automatically. x

E-17

Alarms

You can set ﬁ ve independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached. One of the alarms is a snooze alarm,

while the other four are one-time alarms.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

There are six screens in the Alarm Mode. Four are for x

one-time alarms (indicated by numbers from

through ), one is for a snooze alarm (indicated by

), and one is for the Hourly Time Signal (indicated

by ).

All of the operations in this section are performed in x

the Alarm Mode, which you enter by pressing (page C

E-5).

Alarm number

Alarm time

(Hour : Minutes)

On/Off status

E-16

Press xD D while a countdown operation is in progress to pause it. Press again to

resume the countdown.

To completely stop a countdown operation, ﬁ rst pause it (by pressing xD), and then

press . This returns the countdown time to its starting value.B

To set the countdown start time

In the Countdown Timer Mode, hold down 1. until the A

hours of the countdown start time start to ﬂ ash, which

indicates the setting screen.

Press 2. to move the ﬂ ashing between the hours and C

minutes.

While a setting is ﬂ ashing, use 3. (+) or (–) to D B

change it.

To set the starting value of the countdown time to 24 x

hours, set .

Press 4. to exit the setting screen.A

E-15

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

The countdown operation continues even if you exit the x

Countdown Timer Mode.

All of the operations in this section are performed in the x

Countdown Timer Mode, which you enter by pressing C

(page E-5).

To use the countdown timer

Press while in the Countdown Timer Mode to start the countdown timer.D

When the end of the countdown is reached, the alarm sounds for 10 seconds or until x

you stop it by pressing any button. The countdown time is automatically reset to its

starting value after the alarm stops.

Minutes

SecondsHours

E-14

To measure times with the stopwatch

Elapsed Time

D D D D B

Start Stop Re-start Stop Clear

Split Time

D B B D B

Start Split

( displayed)SPL

Split release Stop Clear

Two Finishes

D B D B B

Start Split

First runner

ﬁ nishes.

Display time of

ﬁ rst runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Clear

E-13

Stopwatch

The stopwatch lets you measure elapsed time, split

times, and two ﬁ nishes.

The display range of the stopwatch is 59 minutes, x

59.99 seconds.

The stopwatch continues to run, restarting from zero x

after it reaches its limit, until you stop it.

The stopwatch measurement operation continues even x

if you exit the Stopwatch Mode.

Exiting the Stopwatch Mode while a split time is frozen x

on the display clears the split time and returns to

elapsed time measurement.

All of the operations in this section are performed in the Stopwatch Mode, which you x

enter by pressing (page E-5).C

Seconds

1/100 second

Minutes

E-12

To toggle a city code time between Standard Time and Daylight Saving Time

In the World Time Mode, use 1. to display the city code D

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

Hold down 2. for about one second to toggle between A

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

The DST indicator is on the display whenever you display x

a city code for which Daylight Saving Time is turned on.

Note that the DST/Standard Time setting affects only x

the currently displayed city code. Other city codes are

not affected.

In the World Time Mode, you can switch the city code you currently have selected x

as your Timekeeping Mode Home City between Standard Time and DST. The

setting you select in the World Time Mode will also be applied in the Timekeeping

Mode.

DST indicator

E-11

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

All of the operations in this section are performed in x

the World Time Mode, which you enter by pressing C

(page E-4).

To view the time in another city code

In the World Time Mode, press (eastward) and D B

(westward) to scroll through the available city codes.

Holding down either button scrolls at high speed.

For full information about city codes, see the “City Code x

Table” at the back of this manual.

If the current time shown for a city is wrong, check your x

Timekeeping Mode time and Home City code settings

and make the necessary changes.

City code

Current time in the zone of

the selected city code

E-10

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

In the Timekeeping Mode, hold down 1. until the A

seconds start to ﬂ ash, which indicates the setting

screen.

Press 2. twice to display the DST setting screen.C

Press 3. to toggle between Daylight Saving Time (D)

and Standard Time ( ).

Press 4. to exit the setting screen.A

The xDST indicator is displayed on the Timekeeping Mode

and Alarm Mode screen while Daylight Saving Time is

turned on.

DST indicator

On/Off status

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	BG-1006SA-4AER
Bredde:	39.8 mm
Dybde:	14.6 mm
Højde:	44.7 mm
Vægt:	42 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Kalender:	Ja
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	3 År
Batteritype:	CR1616
Slagfast:	Ja
Produktdesign:	Casual
Mekanismetype:	Elektronisk
Se opkaldstype:	LCD-skive
Vandbestandig dybde:	100 m
Husets farve:	Lyserød
Båndets hovedfarve:	Lyserød
Etui form:	Rund
Hovedfarve på urskive:	Hvid
Køn:	Hunstik
Nøjagtighed:	30 sek/md
Se markørstil:	Ingen markeringer
Verdenstid funktkon:	Ja