Casio BGA-112C-1BER Manual

Casio Ur BGA-112C-1BER

Læs gratis den danske manual til Casio BGA-112C-1BER (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Casio BGA-112C-1BER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 5001

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A for about one second to toggle between

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

•The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

•Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

•You cannot toggle between Daylight Saving Time and

Standard Time if the displayed city code is the city code

that is currently selected as the Home City in the

Timekeeping Mode. To change the DST setting of your

Home City, use the procedure under “To set the digital

time and date”.

MA0706-EA

About This Manual

•Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

•Button operations are indicated using the letters shown

in the illustration.

•For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode World Time Mode Alarm Mode Stopwatch Mode Edit ModeCountdown Timer Mode

Press .

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display for about two seconds.

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time and analog time are different.

•Pressing D in the Timekeeping Mode will toggle between the Time/Day screen and

the Day/Time screen.

PM indicator Day

Day of week

Seconds

Hour : Minutes

Month-Day

Day of week

Seconds

Press .

Time/Day Screen Day/Time Screen

Read This Before You Set the Digital Time and Date!

The times displayed in the Timekeeping Mode and World Time Mode are linked.

Because of this, make sure you select a city code for your Home City (the city where

you normally use the watch) before you set the time and date.

•To view the current Home City code setting, press A while in the Timekeeping

Mode.

•For full information on city codes, see the “City Code Table”.

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Screen

10:58

2008

Do this:

Press .D

Use D (east) and B (west).

Press .D

Use ).D (+) and B (–

To do this:

Reset the seconds to 00

Change the city code

Toggle between Daylight Saving Time (ON)

and Standard Time (OF)

Change the hour or minutes

Change the year

Change the month or day

Seconds DST Hour

MinutesYearDay

City Code

Month

3. When the setting you want to change is flashing, use D and B to change it as

described below.

•See “Digital Time Daylight Saving Time (DST) Setting for details about the DST”

setting.

DST indicator

On/Off status

4. Press A to exit the setting screen.

•Resetting the seconds to 00

while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00 without changing the minutes.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch s battery replaced.’

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

•A leading zero is added to dates from 1 through 9.

Example: The 1st of the month is displayed as 01.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (ON)

and Standard Time (OF).

4. Press A to exit the setting screen.

•The DST indicator appears on the Timekeeping Mode,

Alarm Mode and Edit Mode screens while Daylight

Saving Time is turned on.

DST indicator

Current time in the zone

of the selected city code

Current seconds count

City code

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time for another city code

In the World Time Mode, press D to scroll eastwardly

through city codes.

•For full information about city codes, see the “City Code

Table”.

•If the current time shown for a city is wrong, check your

Timekeeping Mode time and Home City code settings

and make the necessary changes.

Operation Guide 5001

Alarm time

(Hour : Minutes)

Alarm number

On/Off status

Alarms

You can set five independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

•There are six screens in the Alarm Mode. Five are for

alarms (indicated by numbers from through ),

and one is for the Hourly Time Signal (indicated by

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

•You can select any one of three alarm beeper patterns.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

•To set an alarm, display one of the screens indicated by an alarm number from

through .

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

•This operation turns on the alarm automatically.

3. Press C to move the flashing between the hour and minute settings.

4. While a setting is flashing, use D B (+) and (–) to change it.

•When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the

watch is in.

•To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

•The alarm will sound using the currently selected beeper pattern.

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press A to toggle it on (ON displayed) and off

(OF displayed).

•Turning on an alarm ( through ) displays the

alarm on indicator on its Alarm Mode screen.

•In all modes besides the Alarm Mode, the alarm on

indicator is shown for any alarm that is currently turned

on.

•The alarm on indicator flashes while the alarm is

sounding.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal ( ).

2. Press A to toggle it on (ON displayed) and off

(OF displayed).

•Turning on the Hourly Time Signal displays the Hourly

Time Signal indicator on its Alarm Mode screen.

•While the Hourly Time Signal is turned on, the Hourly

Time Signal on indicator is shown on the display in all

modes besides the Alarm Mode.

On/Off status

Alarm on indicator

1/100 second

Minutes

Seconds

On/Off status

Hourly time signal

on indicator

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

•The display range of the stopwatch is 59 minutes,

59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .C

To measure times with the stopwatch

Elapsed Time

Start Stop Re-start Stop Clear

Start Split

(

displayed)

Split release Stop Clear

Start Split Stop Split release Clear

Split Time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Hours

Minutes

Seconds

Countdown Timer

You can set the countdown timer within a range of

one minute to 24 hours. An alarm sounds when the

countdown reaches zero.

•You can also select auto-repeat, which restarts the

countdown automatically from the original value you set

whenever zero is reached.

•All of the operations is this section are performed in the

Countdown Timer Mode, which you can enter using C.

To use the countdown timer

Press D while in the Countdown Timer Mode to start the countdown timer.

•When the end of the countdown is reached and auto-repeat is turned off, the alarm

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is reset automatically to its starting value after the alarm stops.

•When auto-repeat is turned on, the countdown will restart automatically without

pausing when it reaches zero. The alarm sounds to signal when the countdown

reaches zero.

•The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

•Press D while a countdown operation is in progress to pause it. Press D again to

resume the countdown.

•To stop a countdown operation completely, first pause it (by pressing ), and thenD

press A. This returns the countdown time to its starting value.

To configure countdown timer settings

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down until the hourA

setting of the countdown start time starts to flash, which

indicates the setting screen.

•If the countdown start time is not displayed, use the

procedure under To use the countdown timer“ ” to

display it.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Auto-repeatMinutes

Hours

3. While a setting is flashing, use D and B to change it as described below.

Screen

0:00

Do this:

Use ).D (+) and B (–

Press .D

To do this:

Change the hours or minutes

Toggle auto-repeat on (ON) and off (OF)

•To specify a countdown start time of 24 hours, set 0:00.

4. Press A to exit the setting screen.

•The auto-repeat on indicator ( ) is displayed on the Countdown Timer Mode

screen while this function is turned on.

•Frequent use of auto-repeat and the alarm can run down battery power.

Edit Mode

You can use the Edit Mode to configure the following settings, or to return the settings

to their initial factory defaults.

•Button operation tone on/off

•Alarm beeper pattern

•12/24-hour timekeeping

• 00-second animation on/off

• Analog hand setting

•The analog hand setting will not change when you reset settings to their initial

factory defaults.

•All of the operations in this section are performed in the Edit Mode, which you enter

by pressing C.

•Each press of D cycles through available settings in the sequence shown below.

Button Operation

Tone ( )

Alarm Beeper

Pattern ( )

12/24-hour

Timekeeping ( )

Analog Hand Setting

( )

00-second Animation

( )

Press .

Button Operation Tone

The button operation tone sounds any time you press one of the watch s buttons. You’

can turn the button operation tone on or off as desired.

•Even if you turn off the button operation tone, the alarm, Hourly Time Signal, and

Countdown Timer Mode alarm all operate normally.

To turn the button operation tone on and off

1. In the Edit Mode, use D to display the Button

Operation Tone selection screen.

2. Press A to toggle the button operation tone on (ON)

and off (OF).

On/Off status

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	BGA-112C-1BER
Vægt:	60 g
Dimensioner (BxDxH):	39.8 x 12.9 x 44.2 mm
Urkassens materiale:	Rustfrit stål
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Timer:	1/1min - 24h
Batterilevetid:	2 År
LED-baggrundsbelysning:	Ja
Batteritype:	SR726W
Antal understøttede batterier:	2
Slagfast:	Ja
Urets glastype:	Mineral
Alarmfunktion:	Ja
Vandbestandig dybde:	100 m
Nøjagtighed:	±30 sek/md
Verdenstid funktkon:	Ja