Casio Collection AE-1300WH-4AVEF Manual
Læs nedenfor 📖 manual på dansk for Casio Collection AE-1300WH-4AVEF (5 sider) i kategorien Ur. Denne guide var nyttig for 22 personer og blev bedømt med 4.2 stjerner i gennemsnit af 11.5 brugere
Side 1/5
Operation Guide 3426
E
About This Manual
Depending on the model of your watch, display text
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
To ensure that this watch provides you with the years of
service for which it is designed, be sure to carefully read
and follow the instructions under “Operating Precautions”
and “User Maintenance”.
Be sure to keep all user documentation handy for future
reference.
MA1310-EA
© 2013 CASIO COMPUTER CO., LTD.
E-1
Contents
General Guide .......................................................................................................... E-4
Timekeeping ............................................................................................................. E-6
Stopwatch .............................................................................................................. E-11
Preset Timer ........................................................................................................... E-16
Countdown Timer .................................................................................................. E-20
World Time ............................................................................................................. E-26
Alarm ...................................................................................................................... E-28
Illumination ............................................................................................................E-31
Reference ............................................................................................................... E-32
Specifi cations ........................................................................................................E-38
Operating Precautions .........................................................................................E-m1
User Maintenance ...............................................................................................E-m11
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time .........E-9
To toggle between 12-hour and 24-hour timekeeping .......................................E-10
To measure times with the stopwatch ................................................................. E-12
To set the event time ............................................................................................. E-14
To start timing at the beginning of an event ....................................................... E-14
To pause timing ..................................................................................................... E-15
To reset elapsed time measurement to zero ....................................................... E-15
To perform a preset timer operation .................................................................... E-17
To confi gure countdown timer settings .............................................................. E-21
To perform a countdown timer operation ........................................................... E-24
E-3
To view the time for another city code ................................................................ E-26
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-27
To set the alarm time ............................................................................................. E-28
To stop the alarm tone after it starts to sound .................................................. E-29
To switch the Daily Alarm and Hourly Time Signal on and off ......................... E-30
To test the alarm .................................................................................................... E-30
To illuminate the display ....................................................................................... E-31
To turn the button operation tone on and off ..................................................... E-34
E-4
General Guide
Press to change from mode to mode.C
In any mode (except when a setting screen is on the display), press to illuminate B
the display.
C
Timekeeping Mode
C C
Stopwatch Mode Preset Timer Mode
E-5
C
C C
Countdown Timer Mode World Time Mode Alarm Mode
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
For full information on city codes, see the “City Code
Table” at the back of this manual.
Hour : Minutes
PM indicator
Day of week
Seconds
Month – Day
E-7
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to move the fl ashing in the sequence shown C
below to select other settings.
Seconds DST City Code Hour
C C C C
C
Day Month Year Minutes
CCC
E-8
3. When the setting you want to change is fl ashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to Press .D
Toggle between Daylight Saving Time ( )
and Standard Time ( )
Change the city code Use (east) and (west). D B
Change the hour or minutes Use (+) and (–).D B
Change the year
Change the month or day
See “Daylight Saving Time (DST)” on page E-9 for details about the DST setting.
4. Press to exit the setting screen.A
E-9
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time (D
displayed) and Standard Time ( displayed).
4. Press to exit the setting screen.A
The indicator is on the display while Daylight Saving DST
Time is turned on.
DST indicator
Operation Guide 3426
E-10
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D
24-hour timekeeping.
With the 12-hour format, the (PM) indicator appears for times in the range of noon P
to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the
range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
The indicator is not displayed with the Timekeeping Mode time on the Preset P
Timer Mode, Countdown Timer Mode, World Time Mode, and Alarm Mode screens.
E-11
Stopwatch
The stopwatch lets you measure elapsed time. The upper
display and lower display can be used for offi cial timing of
an event or game.
The measurement range of the upper display is
59 minutes 59 seconds.
The measurement range of the lower display is
99 minutes 59 seconds.
The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-4).
Timekeeping Mode time
Initial Stopwatch Mode
Screen
E-12
This time measurement (1/100 second)
cannot be paused.
Elapsed Time Screen
Minutes Seconds
Press to pause and D
resume elapsed time
measurement.
Minutes Seconds
This time measurement
cannot be paused.
It shows the total elapsed
time since the timing
operation started.
To measure times with the stopwatch
Elapsed Time
DDDD Hold down A
Start Stop*1Resume Stop*1Reset
*1 Elapsed time measurement in the lower display continues.
E-13
Using the Watch for Offi cial Timing of a Sport Event
After you set a game or event time, the watch will sound an alarm when the time in
the lower display reaches that time.
If the event is interrupted for some reason, you can press to pause and resume D
timing in the upper display. The lower display shows the total elapsed time since the
start of the timing operation. You can calculate the total amount of time that play was
interrupted (lost time or injury time) by subtracting the upper display time from the
lower display time.
E-14
To set the event time
1. In the Stopwatch Mode, hold down until the current A
event time setting starts to fl ash in the lower display.
This is the setting screen.
If the current event time is not displayed, use the
procedure under “To reset elapsed time measurement
to zero” (page E-15) to display it.
2. While a setting is fl ashing, use (+) and (–) to D B
change it.
You can set the event time in the range of 1 minute to
60 minutes, in 1-minute units.
“ ” indicates there is no event time set.
3. Press to exit the setting screen.A
To start timing at the beginning of an event
When the current time in the lower display reaches the event start time, press to D
start timing.
This will display elapsed time measurement in the upper and lower displays.
E-15
To pause timing
1. Press .D
This stops elapsed time measurement in the upper display.
Elapsed time measurement in the lower display continues.
2. To resume elapsed time measurement in the upper display, press again.D
When the preset event time is reached
The watch will sound an alarm when the elapsed time measurement in the lower
display (total elapsed time since timing started) reaches the preset event time.
Elapsed time measurement continues to be performed even after the preset event
time is reached.
To reset elapsed time measurement to zero
1. Press . This stops elapsed time measurement in the upper display.D
Elapsed time measurement in the lower display continues.
2. Hold down until the initial Stopwatch Mode screen appears.A
E-16
Preset Timer
The watch includes a number of different preset times that
you can select for the countdown start time.
An alarm sounds when the countdown reaches zero.
The following are the preset start times, all in minutes:
10, 12, 15, 20, 25, 30, 35, 40, 45.
You can also select auto-repeat, which automatically
restarts from the preset start time you selected, whenever
zero is reached.
All of the operations in this section are performed in the
Preset Timer Mode, which you enter by pressing C
(page E-4).
Preset timer time
Timekeeping Mode time
E-17
To perform a preset timer operation
1. In the Preset Timer Mode, use to scroll through the A
preset times until the one you want to use is displayed.
10 minutes 12 minutes 15 minutes 20 minutes
AAA
A
A25 minutes
45 minutes 40 minutes 35 minutes 30 minutes
AAA
A
E-18
To turn on auto-repeat, hold down while a start time A
selection screen is displayed. The number of repeats
will appear in the lower display.
Frequent use of auto-repeat and the alarm can run
down battery power.
2. Press to start the countdown timer.D
Press while a countdown operation is in progress to D
pause it. Press again to resume the countdown.D
Number of repeats
Auto-repeat on indicator
E-19
When the end of the countdown is reached, the alarm sounds for 10 seconds or until
you stop it by pressing any button.
When the end of the countdown is reached while auto-repeat is turned off, the watch
will go into an elapsed time operation and display how much time has elapsed
since the end of the countdown was reached. The elapsed time operation will stop
automatically when it reaches 60 minutes. At that time the countdown timer start
time selection screen will appear.
When the end of the countdown is reached while auto-repeat is turned on, a new
countdown starts from the selected preset start time. The number of repeats is
displayed in the lower display. The number of repeats display changes to “ ” when
the count reaches 100.
To stop a countdown operation completely, fi rst pause it (by pressing ), and then D
press . This will display the initial Preset Timer Mode screen.A
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | Collection AE-1300WH-4AVEF |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio Collection AE-1300WH-4AVEF stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur Karlsson
- Ur Ecom
- Ur Obaku
- Ur La Crosse Technology
- Ur Ice Watch
- Ur Just
- Ur Rodania
- Ur Vitek
- Ur Citizen
- Ur Lucien Picard
- Ur Triwa
- Ur TCM
- Ur Focus Electrics
- Ur Sinn
- Ur Global Tronics
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025