Casio Collection AE-2100W-1AVEF Manual
Læs nedenfor 📖 manual på dansk for Casio Collection AE-2100W-1AVEF (5 sider) i kategorien Ur. Denne guide var nyttig for 27 personer og blev bedømt med 4.6 stjerner i gennemsnit af 14 brugere
Side 1/5
Operation Guide 3198/3299
E-9
Changing the Current Home City Time and Date Settings
1. Use D to display the current Home City Time (T-1)
screen.
2. Hold down A until the seconds start to flash, which
indicates the setting screen.
3. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds City Code Hour
Year 12/24-Hour
Format
Minutes
Illumination
Duration Setting
DST
Day Month
4. When the setting you want to change is flashing, use D and B to change it as
described below.
E-8
•While the Home City Time (T-1) screen is displayed, pressing A will switch the day
of the week / month-day indication to the currently selected Home City code and the
T-1 indicator for about one second.
•You can change the current time setting for your Home City Time (T-1) only.
•For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.
E-7
Switching Between Time Screens
Each press of cycles the time screens in the sequence shown below.D
Displayed for one second.
E-6
Timekeeping
The Timekeeping Mode’s Multi Time feature gives you
quick and easy access to the current time and date in four
different cities, numbered from T-1 (Time 1) through T-4
(Time 4). T-1 is your Home City Time, and T-2, T-3, and
T-4 are Local Times. Local Times are kept in
synchronization with your Home City Time (T-1).
•The digital dial at the top of the screen indicates the
current Home City Time (T-1). For details on reading the
map and digital dial, see “Map and Digital Dial” (page
E-30).
Seconds
Day of week
Month – Day
Hour : Minutes
PM indicator
Map
Digital dial
E-5
Alarm Mode Countdown Timer
Mode
Stopwatch Mode
E-4
General Guide
•Press C to change from mode to mode.
•In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode World Time Mode
Press .
E-3
To turn an alarm on and off ................................................................................. E-23
To turn the Hourly Time Signal on and off ......................................................... E-24
To configure the countdown timer ...................................................................... E-26
To use the countdown timer ................................................................................ E-27
To measure times with the stopwatch ................................................................ E-29
To turn the button operation tone on and off ..................................................... E-32
To turn off Auto Display ....................................................................................... E-35
To turn on Auto Display ....................................................................................... E-35
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-12
To turn on illumination ......................................................................................... E-15
To view the time for another city code ............................................................... E-16
To toggle a city code time
between Standard Time and Daylight Saving Time ....................................... E-17
To change your Home Time city to the current World Time city ...................... E-18
To set an alarm time ............................................................................................. E-20
To test the alarm ................................................................................................... E-22
E-1
Contents
General Guide ......................................................................................................... E-4
Timekeeping ............................................................................................................ E-6
World Time ............................................................................................................ E-16
Alarms .................................................................................................................... E-19
Countdown Timer ................................................................................................. E-25
Stopwatch .............................................................................................................. E-28
Reference .............................................................................................................. E-30
Specifications ....................................................................................................... E-36
E
About This Manual
•The operational procedures for Modules 3198 and 3299 are identical. All of the
illustrations in this manual show Module 3198.
•Button operations are indicated using the letters shown in the illustration.
•Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
Module 3198 Module 3299
MA1205-EA
Operation Guide 3198/3299
E-19
Alarms
Your watch has a total of five alarms, each of which you
can configure as a daily alarm or one-time alarm.
•Daily Alarm: Sounds at the preset time each day.
•One-time Alarm: Sounds once at the preset time and
then is disabled automatically.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
•All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (pageC
E-5).
•Alarms operate in coordination with the current Home
City Time.
Alarm time
(Hour : Minutes)
Alarm number
Alarm on indicator
E-18
To change your Home Time city to the current World Time city
1. In the World Time Mode, use to display the city you want to make your newD
Home Time city.
2. Press at the same time.A and B
•This makes the World Time city you selected in step 1 your new Home Time city.
E-17
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D (east) to display the
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time (DST displayed) and Standard Time (DST
not displayed).
•The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
•Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
•Note that you cannot switch between Standard Time
and Daylight Saving Time while UTC is selected as the
city code.
DST indicator
E-16
World Time
World Time shows the current time in 48 cities (31 time
zones) around the world.
•All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press to scroll eastwardlyD
through city codes.
•For full information about city codes, see the “City Code
Table” at the back of this manual.
•If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make the necessary changes.
Current time and date in
the zone of the selected
city code
City code
E-15
To turn on illumination
In any mode (except when a setting screen is on the display), press to turn onB
illumination.
•You can use the procedure above to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press , the illumination will remain on for aboutB
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
E-14
Changing Your Home City Time
Use the following procedure to change your current Home City Time to any one of the
three Local Times.
1. In the Timekeeping Mode, press D to display the Local Time which you want to
make your Home City Time.
2. Press A B and at the same time.
•This makes the Local Time you selected in step 1 your new Home City Time.
Illumination
An LED (light-emitting diode) illuminate the display for easy reading in the dark.
Illumination Precautions
•The illumination provided by the light may be hard to see when viewed under direct
sunlight.
•Illumination automatically turns off whenever an alarm sounds.
•Frequent use of illumination runs down the battery.
E-13
12/24-Hour Format
•With the 12-hour format, the indicator appears to the left of the hour digits forPM
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Changing the City Setting of a Local Time
You can select any one of the city codes in the table at the back of this manual as a
Local Time city.
1. Display the Local Time whose city setting you want to change, and then hold down
A for about two seconds until the current city code starts to flash.
2. Use D B (east) and (west) to select the city code you want.
3. Press C to display the DST setting screen.
4. Press D to toggle between Daylight Saving Time ( displayed) and Standard
Time ( displayed).
5. After the settings are the way you want, press A.
E-12
To toggle the Timekeeping Mode time between DST and Standard Time
1. Use D to display the current Home City Time (T-1)
screen.
2. Hold down A until the seconds start to flash, which
indicates the setting screen.
3. Press C to display the DST setting screen.
4. Press D to toggle between Daylight Saving Time
( displayed) and Standard Time ( displayed).
5. Press A to exit the setting screen.
•The DST indicator appears on the Timekeeping screen
to indicate that Daylight Saving Time is turned on.
DST indicator
E-11
5. Press A to exit the setting screen.
•The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
E-10
Screen
To do this:
Reset the seconds to .
Toggle between Daylight Saving
Time ( ) and Standard Time ( ).
Change the city code.
Change the hour or minutes.
Toggle between 12-hour ( ) and
24-hour ( ) timekeeping.
Change the year.
Change the month or day.
Toggle the setting between
1.5 seconds ( ) and 3 seconds ( ).
Do this:
Press .D
Press .D
Use D (east) and B (west).
Use D (+) and B (–).
Press .D
Use D (+) and B (–).
Use D (+) and B (–).
Press .D
•See “Daylight Saving Time (DST)” on page E-11 for details about DST setting
.
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | Collection AE-2100W-1AVEF |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio Collection AE-2100W-1AVEF stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur HYT
- Ur Junghans
- Ur Zeppelin
- Ur TW Steel
- Ur Dakota
- Ur CyberData Systems
- Ur Invicta
- Ur Accusplit
- Ur Asics
- Ur Elation
- Ur AcuRite
- Ur Auriol
- Ur Ikea
- Ur Luminox
- Ur Victorinox
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025