Casio Collection LWS-1000H-8AVEF Manual

Casio Ur Collection LWS-1000H-8AVEF

Læs gratis den danske manual til Casio Collection LWS-1000H-8AVEF (7 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Casio Collection LWS-1000H-8AVEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Operation Guide 3469

E-9

3. When the setting you want to change is flashing, use D and E to change it as

described below.

Screen: To do this: Do this:

Reset the seconds to Press

Toggle between Daylight Saving Time ( )

and Standard Time ( )

Press

Change the hour or minutes Use

D (+) and E (–).

Change the year Use

D (+) and E (–).

Change the month or day

4. Press A to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

E-8

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds MinutesDST Hour

YearMonthDay

Seconds

PM indicator

Minutes

Seconds

Month – DayDay of week

Hours

E-7

Dual Time Mode

Countdown Timer Mode

Alarm Mode

Recall Mode

▲

E-6

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B

to illuminate

the face of the watch.

Timekeeping Mode

Press C.

Stopwatch Mode

▲

E-5

Illumination ……………………………………………………………………………E-41

To illuminate the display manually ……………………………………………E-41

To specify the illumination duration……………………………………………E-42

Reference ………………………………………………………………………………E-43

To turn the button operation tone on and off …………………………………E-44

Specifications …………………………………………………………………………E-47

Operating Precautions ………………………………………………………………E-49

User Maintenance ……………………………………………………………………E-60

E-4

Recall Mode ……………………………………………………………………………E-23

To recall stopwatch time records………………………………………………E-24

To delete a log …………………………………………………………………E-26

Countdown Timer………………………………………………………………………E-27

To use the countdown timer ……………………………………………………E-28

To configure countdown start time and auto-repeat settings ………………E-29

Alarms ……………………………………………………………………………………E-31

To set an alarm time ……………………………………………………………E-33

To test the alarm ………………………………………………………………E-35

To select the operation of Alarm …………………………………………… E-36

To turn Alarms and on and off …………………………………………E-37

To turn the hourly time signal on and off ……………………………………E-38

Dual Time ………………………………………………………………………………E-39

To set the Dual Time ……………………………………………………………E-39

E-3

Contents

About This Manual …………………………………………………………………… E-1

General Guide ………………………………………………………………………… E-6

Timekeeping …………………………………………………………………………… E-8

To set the time and date ……………………………………………………… E-8

To toggle between 12-hour and 24-hour timekeeping ………………………E-10

To toggle the Timekeeping Mode between DST and Standard Time ……E-11

Stopwatch ………………………………………………………………………………E-12

To measure elapsed time ………………………………………………………E-16

To measure elapsed time with lap times ……………………………………E-16

To measure elapsed time with split times ……………………………………E-18

To time first and second place finishes ………………………………………E-20

E-2

• To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions under “Operating Precautions”

and “User Maintenance.”

• Be sure to keep all user documentation handy for future reference.

E-1

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Operation Guide 3469

E-19

4. Repeat step 3 to record more split times.

5. Press D to stop the stopwatch.

6. Press E to clear the stopwatch to all zeros.

• Split numbers are incremented automatically starting

from 1 whenever you press E in step 3 of the above

procedure. The maximum split number is 99. Recording

a split time after that causes the split number count to

restart from 00.

Split time

Split number

Split Time Recording

(

Displayed for eight seconds

after

is pressed.

)

E-18

To measure elapsed time with split times

1. When the stopwatch display shows all zeros, press E

to display the split time screen (indicated by ).

2. Press D to start an elapsed time measurement.

• At the time, both the upper and lower displays will

show identical times.

3. Press E to record the time of the first split.

• The current split time appears in the lower display for

about eight seconds, as the total elapsed time, next

lap time, and next split time continue to be timed

internally by the watch. The split number of the

displayed time appears in the upper display.

• After eight seconds, the ongoing lap time

measurement appears in the upper display and the

ongoing elapsed time measurement appears in the

lower display.

Lap time

Elapsed time

E-17

• This freezes the current lap time in the upper part of

the display for about eight seconds, while

measurement of total elapsed time and the next lap

time continue internally. The lap number of the

displayed time appears in the lower display.

• After eight seconds, the ongoing elapsed time

measurement re-appears in the lower display.

4. Repeat step 3 to record more lap times.

5. Press D to stop the stopwatch.

6. Press E to clear the stopwatch to all zeros.

• Lap numbers are incremented automatically starting

from 1 whenever you press E in step 3 of the above

procedure. The maximum lap number is

99. Recording

a lap after that causes the lap number count to restart

from 00.

Elapsed time

Lap number

Lap time

E-16

To measure elapsed time

Note

• You can perform the following steps starting from either the lap time screen or the

split time screen.

1. Press D to start the stopwatch.

2. Press D again to stop the stopwatch.

• You can resume the measurement operation by pressing D.

3. Press E to clear the stopwatch to all zeros.

To measure elapsed time with lap times

1. When the stopwatch display shows all zeros, press E

to display the lap time screen (indicated by ).

2. Press D to start an elapsed time measurement.

• At the time, both the upper and lower displays will

show identical times.

3. Press E to record the time of the first lap.

E-15

▲ ▲

More than 10 hours

More than one hour

Minutes

Seconds

1/100 second Hours

Minutes

Seconds

Hours

Minutes

Seconds

1/100 second

Hours

Minutes

Seconds

E-14

• See “To measure elapsed time with lap times” (page E-16) and “To measure elapsed

time with split times” (page E-18) for more information about each type of measurement.

• You can perform elapsed time measurement starting from either the lap time screen

or the split time screen (pages E-16 and E-18). Whenever you enter the Stopwatch Mode,

the screen (lap time or split time) that was displayed when you last exited the mode

will appear first.

• During a stopwatch elapsed time operation, the upper display initially shows

minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and

seconds when the time in the upper display exceeds 60 minutes.

• The lower display initially shows hours, minutes, seconds, and a 1/100-second

value. This changes to hours, minutes, and seconds when the time in the lower

display exceeds 10 hours.

E-13

• The stopwatch measurement operation continues even if you exit the Stopwatch

Mode.

• For information about how stopwatch times are stored in memory, see “Memory

Management” (page E-21).

Viewing the Stopwatch Displays

The information that appears in the watch’s upper and lower displays depends on

whether you are measuring lap times or split times.

Lap Time Measurement

Upper Display: Lap time

Lower Display: Elapsed time

Split Time Measurement

Upper Display: Lap time

Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored

in memory.)

E-12

Stopwatch

The stopwatch lets you measure elapsed time, lap times,

split times, and two finishes. Lap times and split times can

be stored in memory.

• The display range of the stopwatch is 99 hours,

59 minutes, 59 seconds.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing

C (page

E-6).

Note

• “Lap time” is the time spent to cover a specific segment

of a race, such as one lap around a track. “Split time” is

the time spent from the beginning of a race up to a

certain point.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

Minutes

Seconds

1/100

second

Hours

Remaining

free records

E-11

To toggle the Timekeeping Mode between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time ( displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the Timekeeping and

Alarm Mode screens to indicate that Daylight Saving

Time is turned on.

On/Off status

DST indicator

E-10

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the

P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left

of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

x The

A and P indicators are not displayed with the Timekeeping Mode time on the

Countdown Timer Mode and Dual Time Mode screens.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Collection LWS-1000H-8AVEF

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Collection LWS-1000H-8AVEF stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025