Casio DQ-970 Manual

Casio Ur DQ-970

Læs gratis den danske manual til Casio DQ-970 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Casio DQ-970, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation Guide DQ-970

MA0506-EA

•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the

clock.

•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.

Current time

(Hour, minutes,

seconds)

Day of the week

Current

temperature

Current

humidity

Date

(month - day)

indicator

Alarm time Snooze on

indicator

Alarm on

indicator

Alarm Off Snooze Alarm On

SNZ

OFF

RESETINVALID

SET° °C/ F

ILLUSTRATION

SET° °C/ F

Press

increase

the flashing

digits.

Press

–

decrease

the flashing

digits.

GENERAL GUIDE

1SNOOZE/LIGHT button

•Press this button to illuminate the display for about five seconds.

•Pressing this button while the alarm is sounding stops the alarm.

2Alarm Mode selector

SNZ: Snooze alarm on

ON: Alarm on

OFF: Alarm off

3+ / – buttons

Use these buttons to change the alarm time or the setting that is flashing on the display.

°C/°F button

Press this button to toggle the temperature units between Celsius and Fahrenheit.

5SET button

Use this button when setting the current time.

6RESET button

Press this button to reset the clock after replacing its batteries.

•Buttons marked “INVALID” have no function.

USING THE CLOCK

1. Press the SET button ( ) to cycle through the setting screens as shown below.5

12-hour/24-hour

Timekeeping Screen

Time Setting ScreenMonth and Day

Setting Screen

Year Setting Screen

Normal Timekeeping Screen

2. While the screen you want is displayed, use the + – and buttons (3) to change the flashing digits.

•Holding down or changes the flashing digits at high speed. + –

•You can set the year in the range of 2000 to 2039. The day of

the week is set automatically in accordance with the date

setting.

•Pressing or while the Time Setting Screen is on the display+ –

causes the seconds count to be reset to 00.

•Each press of + – or while the 12-hour/24-hour Timekeeping

Screen is on the display toggles between 12-hour and 24-hour

timekeeping.

3. After making the settings you want, use the SET button ( ) to display the Normal Timekeeping Screen.5

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for

about three minutes without performing any operation.

Operation Guide DQ-970

USING THE ALARM

The alarm sounds when the alarm time you set is reached. You can also use the ) toAlarm Mode selector (2

select the snooze alarm feature.

Setting the Alarm Time

Use the and buttons ( ) to set the alarm time.+ – 3

Pressing the and buttons ( ) causes the alarm time to appear+ – 3

in place of the date on the display.

•Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off

Use the ) on the side of the clock to turn the alarm on and off, and to select the snoozeAlarm Mode selector (2

feature.

•The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON

or SNZ.

•The light also turns on for the first four seconds that the alarm sounds.

•The alarm sound changes over four levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,

the alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.

USING THE LIGHT

Pressing the ) turns on the light and illuminates the display for easy reading in the dark.SNOOZE/LIGHT button (1

Important!

•Overuse of the light can shorten battery life.

THERMOMETER FUNCTIONS

•A built-in sensor measures temperature and shows the measured value on the display.

• ° °The temperature display shows “ ” –LO for temperatures below 50 C (–58 F) and “ ”HI for temperatures above

70 F).°C (158°

• ° ° ° °Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such

readings are actually outside the guaranteed temperature range of this clock.

Switching between Celsius and Fahrenheit

•Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F).

° °C/ F button ( )4

°C

°F

Celsius ( C) Fahrenheit ( F)° °

SET° °C/ F

Press

change the

alarm time

setting.

Press

–

change the

alarm time

setting.

Alarm Mode selector

OFF

Description

The alarm sounds at the preset time for one minute, and up to seven more times every

five minutes thereafter. Even if you stop the alarm by pressing the buttonSNOOZE/LIGHT

(1), the alarm sounds again five minutes later.

•The indicator

flashes on the display to indicate that the snooze feature is activated.

The alarm sounds at the preset time for one minute.

The alarm does not sound.

SNZ

HYGROMETER FUNCTIONS

A built-in sensor measures humidity and shows the measured value on the display.

•The humidity display shows “ ” “ ”LO for humidity below 10% and HI for humidity above 90%.

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Open the battery compartment cover as shown in the illustration.

2. Remove all of the old batteries.

3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct

directions. If you load batteries incorrectly, they can burst and damage the clock.

4. Press the RESET RESET button (6). Be sure to press the button ( ) after replacing batteries.6

5. Replace the battery compartment cover.

Battery precautions

•Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician

immediately.

•Be sure to load the batteries with their positive (+) and negative ( ) ends facing correctly.–

•Never mix old and new batteries, or batteries of different brands.

•Never charge the batteries that come with the clock.

•Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto

your skin.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•The batteries that come with the clock lose some of their power during transport and storage.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	DQ-970

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio DQ-970 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025