Casio DQS-20 Manual

Casio Ur DQS-20

Læs gratis den danske manual til Casio DQS-20 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Casio DQS-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER’S GUIDE DQS-20

• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the

clock.

•Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out

the insulation sheet in the direction indicated by the arrow before using the clock.

•After removing the insulation sheet, press the RESET button (

5).

• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the

illustration.

Alarm Off Alarm On

GENERAL GUIDE

1SNOOZE button

Pressing this button while the alarm is sounding stops the alarm.

2LIGHT button

Press to turn on the backlight.

3Alarm Time Set buttons

Use these buttons to set the alarm time or current time.

4SET button

Use this button when setting the current time.

5RESET button

Press to reset the clock after replacing the battery.

6Alarm Switch

Use this switch to turn the alarm on and off, and to turn on the snooze alarm.

7Solar panel

8Insulation sheet

Pull out the insulation sheet in the direction indicated by the arrow before using the clock.

After removing the insulation sheet, press the RESET button (

5).

SETTING THE TIME

1. Press the SET button (

4) to cycle through the setting screens as shown below.

Month and Day Setting Screen

Time Setting Screen

Normal Timekeeping Screen

Year Setting Screen 12-hour/24-hour Timekeeping Screen

Day of the week

Current time

(Hour, minutes, seconds)

Snooze on indicatorAlarm time

Alarm on indicator

DATE (month - date)

PM indicator

MA0212-A

USER’S GUIDE DQS-20

2. While the screen you want is on the display, use the Alarm Time Set buttons (

3) to change the digits that are

flashing.

•Holding down or changes the flashing digits at high speed.+ –

•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with

the date setting.

•Pressing or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.+ –

•Each press of + – or while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour

and 24-hour timekeeping.

3. After making the settings you want, use the SET button (

4) to display the Normal Timekeeping Screen.

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

USING THE ALARM

The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm

Switch (

to select the snooze alarm feature.

Setting the Alarm Time

Use the Alarm Time Set buttons (

3) to set the alarm time.

Pressing an Alarm Time Set button (

3) causes the alarm time to appear in place of the date on the display.

•Holding down + – or changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Switch (

6) on the side of the clock to turn the alarm on and off, and to select the snooze feature.

•The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNOOZE.

•The backlight also turns on for the first four seconds that the alarm sounds.

•The alarm sound changes over five levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the SNOOZE button (

1) to stop it. When the snooze feature is turned on, the

alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Switch (

6) to OFF.

Alarm Switch Setting

SNOOZE ON

( Zz

)

ALARM ON

OFF

Description

The alarm sounds at the preset time for one

minute, and seven more times every five

minutes thereafter. Even if you stop the alarm

sound by pressing the SNOOZE button (

1),

the alarm operation is performed again five

minutes later.

•The indicator Zz flashes on the display to

indicate that the snooze feature is activated.

The alarm sounds at the preset time for one

minute.

The alarm does not sound.

( )

Press + to increase

the flashing digits.

Press – to decrease

the flashing digits.

Press to change the alarm

time setting (+).

Press to change the alarm

time setting (–).

Alarm Time Set buttons

USING THE LIGHT

Pressing the LIGHT button (

2) turns on the light and illuminates the display for easy reading in the dark.

Important!

•Overuse of the light can shorten battery life.

BATTERY REPLACEMENT

Replace the battery whenever the display of the clock becomes dim and difficult to read.

•Always have the battery replaced at your nearest dealer.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	DQS-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio DQS-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

Casio DQR-300U Manual

18 Juni 2025

Casio HS-60W Manual

18 Juni 2025

Casio DQ-960 Manual

18 Juni 2025

Casio DQR-300 Manual

18 Juni 2025

Ur Manualer

Nyeste Ur Manualer

ELYSEE Diomedes Ii 83015L Manual

18 Juni 2025

ELYSEE Zelos 98003 Manual

18 Juni 2025

ELYSEE The Race I 80524S Manual

18 Juni 2025

ELYSEE Rally Timer I 80522 Manual

18 Juni 2025

ELYSEE Nestor 15101M Manual

18 Juni 2025

ELYSEE Sithon Moon 13293 Manual

18 Juni 2025

ELYSEE Rally Timer I 80530 Manual

18 Juni 2025

ELYSEE Stentor 13272 Manual

18 Juni 2025

ELYSEE Bronze Automatic 98011 Manual

18 Juni 2025

ELYSEE Rally Timer I 80517W Manual

18 Juni 2025