Casio DQS-30 Manual

Casio Ur DQS-30

Læs gratis den danske manual til Casio DQS-30 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Casio DQS-30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER’S GUIDE DQS-30

MA0212-A

SNOOZE

DOWN

OFF

S T RESET

LIGHT

SNOOZE

• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the

clock.

• Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out

the insulation sheet in the direction indicated by the arrow before using the clock.

• After removing the insulation sheet, press the RESET button (

5).

• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the

illustration.

Alarm Off Alarm On

Current time

(Hour, minutes, seconds) Alarm on indicator

PM indicator

Day of the week

Snooze on indicator

Alarm time

DATE (month - date)

GENERAL GUIDE

1SNOOZE button

Pressing this button while the alarm is sounding stops the alarm.

2LIGHT button

Press to turn on the backlight.

3Alarm Time Set button

Use this button to change the alarm time or current time setting.

4SET button

Use this button when setting the current time.

5RESET button

Press to reset the clock after replacing the battery.

6Alarm Switch

Use this switch to turn the alarm on and off, and to turn on the snooze alarm.

7Solar panel

8Insulation sheet

Pull out the insulation sheet in the direction indicated by the arrow before using the clock.

After removing the insulation sheet, press the RESET button (

5).

SETTING THE TIME

1. Press the SET button (

4) to cycle through the setting screens as shown below.

Month and Day Setting Screen Time Setting Screen

Normal Timekeeping Screen

Year Setting Screen 12-hour/24-hour Timekeeping Screen

USER’S GUIDE DQS-30

2. While the screen you want is on the display, use the Alarm Time Set button (

to change the digits that are

flashing.

DOWN

•Holding down UP or DOWN changes the flashing digits at high speed.

•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with

the date setting.

•Pressing UP or DOWN while the Time Setting Screen is on the display causes the seconds count to be reset

to 00.

•Each press of UP or DOWN while the 12-hour/24-hour Timekeeping Screen is on the display toggles between

12-hour and 24-hour timekeeping.

3. After making the settings you want, use the SET button (

to display the Normal Timekeeping Screen.

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

USING THE ALARM

The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm

Switch (

to select the snooze alarm feature.

Setting the Alarm Time

Use the Alarm Time Set button (

to set the alarm time.

Pressing the Alarm Time Set button (

causes the alarm time to appear in place of the date on the display.

DOWN

•Holding down UP or DOWN changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Switch (

on the right side of the clock to turn the alarm on and off, and to select the snooze

feature.

Description

The alarm sounds at the preset time for one

minute, and seven more times every five

minutes thereafter. Even if you stop the alarm

sound by pressing the SNOOZE button (

1),

the alarm operation is performed again five

minutes later.

•The indicator Zz flashes on the display to

indicate that the snooze feature is activated.

The alarm sounds at the preset time for one

minute.

The alarm does not sound.

Alarm Switch Setting

SNOOZE ON

ALARM ON

(

)

OFF

( )

Press DOWN to decrease

the flashing digits.

Press UP to increase the

flashing digits.

Press to change the alarm

time setting (UP).

Press to change the alarm

time setting (DOWN).

•The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNOOZE.

•The backlight also turns on for the first four seconds that the alarm sounds.

•The alarm sound changes over five levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the SNOOZE button (

to stop it. When the snooze feature is turned on, the

alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Switch (

to OFF.

USING THE LIGHT

Pressing the LIGHT button (

2) turns on the light and illuminates the display for easy reading in the dark.

Important!

•Overuse of the light can shorten battery life.

BATTERY REPLACEMENT

Replace the battery whenever the display of the clock becomes dim and difficult to read.

•Always have the battery replaced at your nearest dealer.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	DQS-30

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio DQS-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio TQ-309 Manual

19 Juni 2025

Casio DQS-30 Manual

19 Juni 2025

Casio LTP-VT01G Manual

19 Juni 2025

Casio DQR-100 Manual

19 Juni 2025

Casio MTP-B130D Manual

19 Juni 2025

19 Juni 2025

19 Juni 2025

19 Juni 2025

19 Juni 2025

19 Juni 2025

Ur Manualer

Nyeste Ur Manualer

ELYSEE Rally Timer I 80516M Manual

19 Juni 2025

ELYSEE Rally Timer I 80531 Manual

19 Juni 2025

ELYSEE Diomedes Ii 83016 Manual

19 Juni 2025

ELYSEE Vintage Master 80545S Manual

19 Juni 2025

ELYSEE Diomedes Ii 83016L Manual

19 Juni 2025

Ice Watch Find Manual

19 Juni 2025

ELYSEE Start-Up 18010 Manual

19 Juni 2025

ELYSEE Diomedes Ii 83015 Manual

19 Juni 2025

ELYSEE Sithon Automatic 13282M Manual

19 Juni 2025

ELYSEE Sithon Moon 13293M Manual

19 Juni 2025