Casio Edifice Classic Manual

Casio Ur Edifice Classic

Læs nedenfor 📖 manual på dansk for Casio Edifice Classic (7 sider) i kategorien Ur. Denne guide var nyttig for 58 personer og blev bedømt med 4.7 stjerner i gennemsnit af 29.5 brugere

Download PDF

Side 1/7

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-15) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-17).

The watch is now ready for use.

E-4

Contents

About This Manual …………………………………………………………………………………………… E-2

Things to check before using the watch ………………………………………………………………… E-3

Mode Reference Guide ……………………………………………………………………………………… E-7

Timekeeping ………………………………………………………………………………………………… E-13

Conﬁ guring Home City Settings ………………………………………………………………………… E-15

To conﬁ gure Home City settings …………………………………………………………………… E-15

To change the daylight saving time (summer time) setting……………………………………… E-16

Conﬁ guring Current Time and Date Settings ………………………………………………………… E-17

To change the current time and date settings …………………………………………………… E-17

Hand Home Position Adjustment ……………………………………………………………………… E-20

To adjust home positions …………………………………………………………………………… E-20

Taking Temperature Readings …………………………………………………………………………… E-22

To take temperature readings ……………………………………………………………………… E-22

To calibrate the temperature sensor ……………………………………………………………… E-24

Specifying Temperature Unit …………………………………………………………………………… E-25

To specify the temperature unit …………………………………………………………………… E-25

E-5

Checking the Current Time in a Different Time Zone ………………………………………………… E-26

To enter the World Time Mode …………………………………………………………………… E-26

To conﬁ gure World Time City and summer time settings ……………………………………… E-27

To swap your Home Time and World Time Cities ……………………………………………… E-28

Using the Stopwatch ……………………………………………………………………………………… E-29

To enter the Stopwatch Mode ……………………………………………………………………… E-29

To perform an elapsed time operation …………………………………………………………… E-29

To pause at a split time ……………………………………………………………………………… E-29

To measure two ﬁ nishes …………………………………………………………………………… E-30

Using the Countdown Timer ……………………………………………………………………………… E-31

To enter the Countdown Timer Mode ……………………………………………………………… E-31

To specify the countdown start time ……………………………………………………………… E-31

To perform a countdown timer operation ………………………………………………………… E-32

To stop the alarm …………………………………………………………………………………… E-32

Using the Alarm …………………………………………………………………………………………… E-33

To enter the Alarm Mode …………………………………………………………………………… E-33

To set an alarm time ………………………………………………………………………………… E-34

To test the alarm …………………………………………………………………………………… E-34

To turn an alarm and the Hourly Time Signal on and off………………………………………… E-35

To stop the alarm …………………………………………………………………………………… E-35

E-6

Illumination ………………………………………………………………………………………………… E-36

To illuminate the display manually ………………………………………………………………… E-36

To change the illumination duration ……………………………………………………………… E-36

To enable or disable the auto light switch ………………………………………………………… E-38

Button Operation Tone …………………………………………………………………………………… E-40

To enable or disable the button operation tone ………………………………………………… E-40

Low Battery Indication …………………………………………………………………………………… E-41

Troubleshooting …………………………………………………………………………………………… E-42

Speciﬁ cations ……………………………………………………………………………………………… E-45

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time in the Home City

• View the current time in the World Time City Any mode E-13

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-13

Determine the temperature at your current location Thermometer Mode E-22

Conﬁ gure World Time settings World Time Mode E-26

Use the stopwatch to measure elapsed time Stopwatch Mode E-29

Use the countdown timer Countdown Timer Mode E-31

Set an alarm time Alarm Mode E-33

Operation Guide 5446

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

Thermometer Mode

Timekeeping Mode

Mode dial hand

Thermometer Mode

Timekeeping Mode

Mode dial hand

E-9

• The mode dial hand indicates the watch’s current mode.

World Time Mode Stopwatch Mode

Countdown Timer ModeAlarm Mode

World Time Mode Stopwatch Mode

Countdown Timer ModeAlarm Mode

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

C for about two seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Thermometer 1 to 2 minutes

Alarm 2 to 3 minutes

Setting screen (digital setting ﬂ ashing) 2 to 3 minutes

Initial Screens

When you enter the Alarm or World Time Mode, the data you were viewing when you last exited the mode

appear ﬁ rst.

Scrolling

The D and B buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-11

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands out of the way to better

view what is on the display.

• This operation can be performed in any mode. In the case of a setting mode (setting ﬂ ashing on the

screen), the hands will move out of the way automatically, even if you do not perform the below

operation.

1. While holding down B, press C.

• This will cause the hour and minute hands to move to a location where they do not block your view

of the digital display.

Example: When the current time is 8:23

Flashes while the hands

are moved out of the way.

2. Holding down B again as you press C will cause the hands to return to their normal positions (normal

timekeeping).

E-12

Note

• Watch button functions are the same regardless of whether the hands are moved out of the way or at

their normal positions.

• Changing to another mode will cause the hands to move back to their normal positions.

• The hands also will move back to their normal positions automatically if no operation is performed for

about one hour.

E-13

Timekeeping

In addition to viewing the current time (Home Time), day, and day of the week at your location (Home

City), you can also use World Time to view the time at locations around the globe.

Conﬁ guring Home City Settings: page E-15

Conﬁ guring World Time Settings: page E-26

Hour hand

Second hand

World Time

minute hand

World Time

hour hand

Minute hand

Day

Day of week

World Time AM/PM

• Home Time AM/PM can be determined by viewing the

Hour:Minutes, Seconds digital display (shown below).

Date Screen

E-14

Navigating between Display Screens

Each press of A toggles cycles the display screens as shown below.

Day of week, Day Month Day, Seconds Hour : Minutes, Seconds

PM indicator

(Displayed when

12-hour timekeeping

is selected.)

E-15

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down

A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), city code will be

ﬂ ashing in the upper display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use D (East) and B (West) to scroll through the available city codes.

• Keep scrolling until the city code you want to select as your Home

City is shown in the upper display.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press

• This will cause the DST indicator to appear in the upper display

and the DST setting of the currently selected Home City to appear

in the upper display.

Press

to toggle the DST setting between daylight saving time (ON)

and standard time (OFF).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code

DST indicator

City code

DST indicator

Operation Guide 5446

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Edifice Classic
Bredde:	45.1 mm
Dybde:	13.3 mm
Højde:	49.6 mm
Vægt:	147 g
Armbånd, materiale:	Rustfrit stål
Vandfast:	Ja
Urkassens materiale:	Rustfrit stål
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Termometer:	Ja
Urtype:	Armbåndsur
Batterilevetid:	2 År
LED-baggrundsbelysning:	Ja
Batteritype:	SR927W
Antal understøttede batterier:	2
Urets glastype:	Mineral
Alarmfunktion:	Ja
Mekanismetype:	Kvarts
Se opkaldstype:	Analogopkald
Vandbestandigt tryk:	10 ATM
Vandbestandig dybde:	100 m
Husets farve:	Rustfrit stål
Båndets hovedfarve:	Rustfrit stål
Etui form:	Rund
Hovedfarve på urskive:	Sort
Se markørfarve:	Sølv
Køn:	Hanstik
Nøjagtighed:	15 sek/md
Se markørstil:	Ingen nummer-visning
Kronograf:	Ja
Antal visere:	3
Nedtællingsur:	Ja
Verdenstid funktkon:	Ja
Lysende urskive:	Ja