Casio EFA-118D-1AVEF Manual

Casio Ur EFA-118D-1AVEF

Læs gratis den danske manual til Casio EFA-118D-1AVEF (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Casio EFA-118D-1AVEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

USER’S GUIDE 2747

MA0303-A

About This Manual

∑Button operations are indicated using the letters shown

in the illustration.

∑Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

General Guide

∑Press C to change from mode to mode. After you perform an operation (except for

B C) in any mode, pressing returns to the Timekeeping Mode.

∑In any mode, press B to illuminate the display.

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time and analog time are different.

∑In the Timekeeping Mode, press A to toggle the display between the date screen

and the time screen.

Date Screen Time Screen

Day of week

Month – Day

Hour : Minutes

PM indicator

Minute hand

Hour hand

Seconds

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and

date. When setting the digital time, you can also configure settings for summer time

(Daylight Saving time or DST).

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping (indicatedD

by or A P on the display), or 24-hour timekeeping.

∑With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the (AM) indicator appears for times in the rangeA

of midnight to 11:59 a.m.

∑With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

∑The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(ON displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

∑The DST indicator appears on the Timekeeping, Alarm,

and Hand Setting Mode to indicate that Daylight Saving

Time is turned on.

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not

match the time of the digital display.

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

flash, which indicates the analog setting screen.

3. Press D to advance the analog time setting by

20 seconds.

∑Holding down D advances the analog time setting at

high speed.

Press .C

Timekeeping Mode Telememo Mode World Time Mode Alarm Mode Countdown Timer

Mode

Stopwatch Mode Hand Setting Mode

Press .A

DST

Seconds

Day

Hour

YearMonth

Minutes

3. When the setting you want to change is flashing, use B and D to change it as

described below.

Screen

OFF

P10:08

CAAD

6-30

To do this:

Reset the seconds to AA.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF).

Change the hour or minutes.

Change the year.

Change the month or day.

Do this:

Press .D

Use D (+) and B (–).

4. Press A to exit the setting screen.

∑Resetting the seconds only (without changing the hour, minute, or DST setting)

causes the analog minute hand setting to be adjusted automatically. If you change

the hour, minute, or DST setting, you should also use the procedure under “To

adjust the analog time” to adjust the analog hands accordingly.

∑See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST

setting.

∑Resetting the seconds to AA while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to AA without changing the minutes.

∑The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

∑The year can be set in the range of 2000 to 2099.

∑The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

∑If you need to advance the analog time a long way, press at the sameD and B

time. This locks the high speed hand movement, so you can release the two

buttons. High-speed hand movement continues until you press any button. It will

also stop automatically after the time advances 12 hours or if an alarm (daily

alarm, Hourly Time Signal, or countdown alarm) starts to sound.

4. Press A to exit the setting screen.

∑To return to the Timekeeping Mode, press C.

USER’S GUIDE 2747

To create a new Telememo record

1. In the Telememo Mode, press B and D at the same

time to display the new data screen.

∑The new data screen shows

___, which indicates

that there is no text in the name field.

∑If the new data screen does not appear, it means that

memory is full. To store another record, you will first

have to delete some of the records stored in memory.

2. Hold down A until the flashing cursor (_) appears in

the name field of the display, which indicates the setting

screen.

3. Use D and B to change the character at the cursor

position in the name field. The character changes in the

following sequence.

(space) to to to

Press .

∑You can input spaces, alpha characters, symbols, and numbers in a name. For

details, see the “Character List”.

4. When the character you want is at the cursor position, press C to move the cursor

to the right.

5. Repeat steps 3 and 4 until the name is complete.

∑You can input up to eight characters for the name.

6. After you input the name, press C as many times as

necessary to move the cursor to the number field.

∑You tell when you are in the name field because of

the long cursor (_). The number field has a short

cursor (_).

Name

Record number

Remaining memory

Number

Telememo

Telememo lets you store up to 30 records, each

containing name and telephone number data. Records

are automatically sorted based on the characters of the

name. You can recall records by scrolling through them on

the display.

∑A Telememo Mode record has a name field and a

number field.

∑See “Character List” for details on how the watch sorts

records.

∑All of the operations in this section are performed in the

Telememo Mode, which you enter by pressing C.

New Data Screen

∑The name field has spaces for eight characters, so you must press C to move

the past the 8th character in order to get to the number field.

∑The number field has spaces for 16 digits. Pressing C until the cursor moves

past the 16th digit causes it to jump back to the first character of the name field.

7. Use D B and to change the character at the cursor position in the number field.

The character changes in the following sequence.

(space) to

Press .

8. When the character you want is at the cursor position, press C to move the cursor

to the right.

9. Repeat steps 7 and 8 until you complete number input.

∑You can input up to 16 digits for the number.

10. Press A to store your data and return to the Telememo record screen (without

the cursor).

∑After you press A to store data, the name flashes for about one second to indicate

that records are being sorted.

∑Note that a record must have something input in the name field, otherwise you will

not be able to store it.

To recall Telememo records

In the Telememo Mode, press (+) to scroll through Telememo records on theD

display.

∑Only name data appears when you scroll through Telememo records.

∑Press Ato toggle the screen between the name and number fields.

Name Number

∑The name and number scroll from right to left on the display. A separator (<) is

inserted between the last character and first character of the data.

∑Pressing D while the last Telememo record is on the display causes the new data

screen to appear.

To edit a Telememo record

1. In the Telememo Mode, use D to scroll through the records and display the one

you want to edit.

2. Hold down A until the flashing cursor appears on the display.

3. Use C to move the flashing to the character you want to change.

4. Use B D and to change the character.

∑For details on inputting characters, see “To create a new Telememo record” (step

3 for name input and 7 for number input).

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record

1. In the Telememo Mode, use D to scroll through the records and display the one

you want to delete.

2. Hold down A until the flashing cursor appears on the display.

3. Press B D and at the same time to delete the record.

∑CLR appears to indicate that the record is being deleted. After the record is

deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

Press .A

World Time

World Time digitally displays the current time in 30 cities

(29 time zones) around the world.

∑All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

World Time

The time settings of the Timekeeping Mode and the World

Time Mode are independent of each other, so you must

make separate settings for each. This watch is preset with

a number of city codes, each of which represents the time

zone where that city is located.

∑Whenever you change the time setting for any city in the World Time Mode, the

settings of all other cities are changed accordingly.

∑If your location is not included in the preset city codes, select the preset city code

that is in the same time zone as your location.

∑For full information on city codes, see the “City Code Table”.

To set the World Time

1. In the World Time Mode, press D to scroll through city

codes.

2. Hold down A until the DST On/Off setting of the world

time starts to flash, which indicates the setting screen.

3. Press C to move the flashing in the sequence shown

below to select the other settings.

DST MinutesHour

4. While a setting is flashing, use D B and to change it.

∑Pressing D and B at the same time while any World Time setting is flashing

causes the displayed time to change to the same setting as the current

Timekeeping Mode time.

∑While DST On/Off setting is selected (flashing), press D to toggle between

Daylight Saving Time (ON) and Standard Time (OFF).

∑While the hour or minutes setting is selected (flashing), use D B (+) and (–) to

change it.

5. Press A to exit the setting screen.

To view the time in another city code

In the World Time Mode, press D to scroll through city codes.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

whose Standard Time/Daylight Saving Time setting you

want to change.

2. Hold down A until the DST On/Off setting of the world

time starts to flash, which indicates the setting screen.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

∑The DST indicator appears on the World Time Mode display to indicate that Daylight

Saving Time is turned on.

∑The above operation toggles all World Time city codes between Daylight Saving

Time and Standard Time. Note that you cannot make settings for individual city

codes.

Alarms

You can set three independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached. One of the alarms is a snooze alarm,

while the other two are one-time alarms.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

∑There are four screens in the Alarm Mode. Two are for

one-time alarms (indicated by numbers AL1and

AL2 SNZ), one is for a snooze alarm (indicated by ),

and one is for the Hourly Time Signal (indicated by

SIG).

∑All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

City code

Current time for the

selected city code

AM indicator

Alarm time

(Hour : Minutes)

∑To set a one-time alarm, display one of the screens indicated by an alarm number

AL1 AL2or . To set the snooze alarm, display the screen indicated by SNZ.

∑The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

∑This operation automatically turns on the alarm.

3. Press C to move the flashing between the hour and minute settings.

4. While a setting is flashing, use D B (+) and (–) to change it.

∑When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. ( indicator) or p.m. (A P indicator).

5. Press A to exit the setting screen.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	EFA-118D-1AVEF
Vægt:	135 g
Dimensioner (BxDxH):	39 x 12.8 x 45.5 mm
Armbånd, materiale:	Rustfrit stål
Urkassens materiale:	Rustfrit stål
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Timer:	1/1min - 24h
Batterilevetid:	10 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR2025
Antal understøttede batterier:	1
Urets glastype:	Mineral
Alarmfunktion:	Ja
Snooze funktion:	Ja
Vandbestandig dybde:	100 m
Nøjagtighed:	±30 sek/md
Verdenstid funktkon:	Ja