Casio G-Shock Classic GAW-100-1AER Manual

Casio Ur G-Shock Classic GAW-100-1AER

Læs gratis den danske manual til Casio G-Shock Classic GAW-100-1AER (8 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 65 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 33 anmeldelser. Har du et spørgsmål om Casio G-Shock Classic GAW-100-1AER, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
MO1502-EA © 2015 CASIO COMPUTER CO., LTD.
Congratulations upon your selection of this CASIO watch.
Applications
This watch has built-in sensors that measure direction and temperature.
Measurement results are indicated by the watch’s hands and displays. These features make this watch
useful when hiking, mountain climbing, or when engaging in other such outdoor activities.
Warning!
• The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
•
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E E-1
ENGLISH
Important!
• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other
activities, always be sure to take along another compass to confi rm readings. If the readings produced
by the digital compass of this watch are different from those of the other compass, perform bidirectional
calibration of the digital compass to ensure more accurate readings.
• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a
permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or
electrical household appliances (TV, computer, cellphone, etc.)
E-2
About This Manual
• Depending on the model of your watch, display text appears either as
dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
• Button operations are indicated using the letters shown in the
illustration.
• Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-3
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-14) to confi gure your Home City and
daylight saving time settings.
Important!
Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping
Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-16).
The watch is now ready for use.
E-4
Contents
About This Manual …………………………………………………………………………………………… E-2
Things to check before using the watch ………………………………………………………………… E-3
Mode Reference Guide ……………………………………………………………………………………… E-7
Timekeeping ………………………………………………………………………………………………… E-13
Confi guring Home City Settings ………………………………………………………………………… E-14
To confi gure Home City settings …………………………………………………………………… E-14
To change the daylight saving time (summer time) setting……………………………………… E-15
Confi guring Current Time and Date Settings ………………………………………………………… E-16
To change the current time and date settings …………………………………………………… E-16
Hand Home Position Adjustment ……………………………………………………………………… E-19
To adjust home positions …………………………………………………………………………… E-19
Using the Digital Compass ……………………………………………………………………………… E-21
To perform a digital compass operation …………………………………………………………… E-21
To perform bidirectional calibration ………………………………………………………………… E-25
To perform magnetic declination correction ……………………………………………………… E-27
Taking Temperature Readings …………………………………………………………………………… E-31
To take temperature readings ……………………………………………………………………… E-31
To calibrate the temperature sensor ……………………………………………………………… E-33
E-5
Specifying Temperature Unit …………………………………………………………………………… E-34
To specify the temperature unit …………………………………………………………………… E-34
Checking the Current Time in a Different Time Zone ………………………………………………… E-35
To enter the World Time Mode …………………………………………………………………… E-35
To confi gure World Time City and summer time settings ……………………………………… E-36
To swap your Home Time and World Time Cities ……………………………………………… E-37
Using the Stopwatch ……………………………………………………………………………………… E-38
To enter the Stopwatch Mode ……………………………………………………………………… E-38
To perform an elapsed time operation …………………………………………………………… E-38
To pause at a split time ……………………………………………………………………………… E-38
To measure two fi nishes …………………………………………………………………………… E-39
Using the Countdown Timer ……………………………………………………………………………… E-40
To enter the Countdown Timer Mode ……………………………………………………………… E-40
To specify the countdown start time ……………………………………………………………… E-40
To perform a countdown timer operation ………………………………………………………… E-41
To stop the alarm …………………………………………………………………………………… E-41
Using the Alarm …………………………………………………………………………………………… E-42
To enter the Alarm Mode …………………………………………………………………………… E-42
To set an alarm time ………………………………………………………………………………… E-43
To test the alarm …………………………………………………………………………………… E-43
To turn an alarm and the Hourly Time Signal on and off………………………………………… E-44
To stop the alarm …………………………………………………………………………………… E-44
E-6
Illumination ………………………………………………………………………………………………… E-45
To illuminate the display manually ………………………………………………………………… E-45
To change the illumination duration ……………………………………………………………… E-45
To enable or disable the auto light switch ………………………………………………………… E-47
Button Operation Tone …………………………………………………………………………………… E-49
To enable or disable the button operation tone ………………………………………………… E-49
Low Battery Indication …………………………………………………………………………………… E-50
Troubleshooting …………………………………………………………………………………………… E-51
Specifi cations ……………………………………………………………………………………………… E-55
E-7
Mode Reference Guide
Your watch has 7 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure time and date settings
Timekeeping Mode E-13
• Determine north and the bearing to a destination
• Determine your current location using the watch and a map Digital Compass Mode E-21
Determine the temperature at your current location Thermometer Mode E-31
View the current time in 48 cities (31 time zones) and UTC World Time Mode E-35
Use the stopwatch to measure elapsed time Stopwatch Mode E-38
Use the countdown timer Countdown Timer Mode E-40
Set an alarm time Alarm Mode E-42
Operation Guide 5441
E-8
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
Stopwatch Mode
Countdown Timer Mode
Digital Compass Mode
Stopwatch Mode
Countdown Timer Mode
Digital Compass Mode
E-9
• The mode dial hand indicates the watch’s current mode.
World Time Mode
Thermometer Mode
Timekeeping Mode
Alarm Mode
Mode dial hand
World Time Mode
Thermometer Mode
Timekeeping Mode
Alarm Mode
Mode dial hand
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
• To enter the Timekeeping Mode from any other mode, hold down
D for about two seconds.
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Digital Compass 1 minute
Thermometer 1 to 2 minutes
Alarm 2 to 3 minutes
Setting screen (digital setting fl ashing) 2 to 3 minutes
Initial Screens
When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you
last exited the mode appears fi rst.
Scrolling
The E and B buttons are used on the setting screen to scroll through data on the display. In most
cases, holding down these buttons during a scroll operation scrolls through the data at high speed.
E-11
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands out of the way to better
view what is on the display.
• This operation can be performed in any mode. In the case of a setting mode (setting fl ashing on the
screen), the hands will move out of the way automatically, even if you do not perform the below
operation.
1. While holding down B, press D.
• This will cause the hour and minute hands to move to a location where they do not block your view
of the digital display.
Example: When the current time is 8:23
Flashes while the hands
are moved out of the way.
2. Holding down B again as you press D will cause the hands to return to their normal positions (normal
timekeeping).
E-12
Note
• Watch button functions are the same regardless of whether the hands are moved out of the way or at
their normal positions.
• Changing to another mode will cause the hands to move back to their normal positions.
• The hands also will move back to their normal positions automatically if no operation is performed for
about one hour.
E-13
Timekeeping
Use the Timekeeping Mode to view the current time and date, and the day of the week.
Date Screen
Day of week
Hour hand
Second hand
World Time
minute hand
World Time
hour hand
Minute hand
World Time AM
and PM indicators
Mode dial hand
Seconds
Navigating between Display Screens
Each press of A toggles cycles the display screens as shown below.
Day of week, Day Month Day, Seconds Hour : Minutes, Seconds
PM indicator
E-14
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
• When you release A (after ADJ appears), city code will be
fl ashing in the upper display. This is the setting mode.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
2. Use E (East) and B (West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City is shown in the upper display.
• For details about city codes, see the “City Code Table” at the back
of this manual.
3. Press D.
• This will cause the DST indicator to appear in the upper display
and the DST setting of the currently selected Home City to appear
in the upper display.
4.
Press
E
to toggle the DST setting between daylight saving time (
ON)
and standard time (OFF).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
City code
DST indicator
City code
DST indicator
E-15
5. After all of the settings are the way you want, press A to exit the setting screen.
• The indicator will be on the upper display while daylight saving time is turned on.DST
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down
A until ADJ appears in the
upper display.
• When you release A (after ADJ appears), city code will be
fl ashing in the upper display.
2. Press
D.
• This will cause the DST indicator to appear in the upper display
and the DST setting of the currently selected Home City to appear
in the upper display.
3. Press E to toggle the DST setting between daylight saving time (
ON) and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the setting screen.
• The indicator will be on the upper display while daylight saving time is turned on.DST
Operation Guide 5441

Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: G-Shock Classic GAW-100-1AER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock Classic GAW-100-1AER stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Casio Manualer

Casio

Casio AE2000W-1AV Manual

5 September 2025
Casio

Casio AEQ-110 Manual

4 September 2025
Casio

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025
Casio

Casio Baby-G BSA-B100 Manual

27 Juli 2025
Casio

Casio G-Shock GM-110 Manual

27 Juli 2025
Casio

Casio G-Shock GM-S5600 Manual

27 Juli 2025
Casio

Casio Edifice EF-527D-1A Manual

27 Juli 2025
Casio

Casio Edifice EFR-571 Manual

27 Juli 2025
Casio

Casio G-Shock GST-S110 Manual

27 Juli 2025
Casio

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko

Grand Seiko 9F85 Manual

12 September 2025
Grand Seiko

Grand Seiko 9R01 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R65 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R02 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R15 Manual

11 September 2025
Citizen

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025
Citizen

Citizen L Mae EM1060-52N Manual

3 September 2025
Citizen

Citizen Corso Diamond EW2712-55E Manual

3 September 2025
Citizen

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025
Breitling

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025