Casio G-Shock DW-5600BB-1 Manual

Casio Ur G-Shock DW-5600BB-1

Læs gratis den danske manual til Casio G-Shock DW-5600BB-1 (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Casio G-Shock DW-5600BB-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Operation Guide 3458

E-9

Switching Between Time Screens

Each press of D cycles the time screens in the sequence shown below.

D D D

Displayed for one second.

E-8

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in four

different cities, numbered from T-1 (Time 1) through T-4

(Time 4). T-1 is your Home City Time, and T-2, T-3, and

T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

• The digital dial at the top of the screen indicates the

current Home City Time (T-1). For details on reading the

map and digital dial, see “Map and Digital Dial” (page

E-32).

PM indicator

Digital dial

Map

Seconds

Month – Day

Day of week

Hour : Minutes

E-7

Alarm Mode Countdown Timer

Mode

Stopwatch Mode

E-6

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Timekeeping Mode World Time Mode

Press C.

E-5

Specifications …………………………………………………………………………E-38

E-4

Alarms ……………………………………………………………………………………E-21

To set an alarm time ……………………………………………………………E-22

To test the alarm ………………………………………………………………E-24

To turn an alarm on and off ……………………………………………………E-25

To turn the Hourly Time Signal on and off ……………………………………E-26

Countdown Timer………………………………………………………………………E-27

To configure the countdown timer ……………………………………………E-28

To use the countdown timer ……………………………………………………E-29

Stopwatch ………………………………………………………………………………E-30

To measure times with the stopwatch ………………………………………E-31

Reference ………………………………………………………………………………E-32

To turn the button operation tone on and off …………………………………E-34

To turn off Auto Display ………………………………………………………E-37

To turn on Auto Display ………………………………………………………E-37

E-3

Contents

About This Manual …………………………………………………………………… E-1

General Guide ………………………………………………………………………… E-6

Timekeeping …………………………………………………………………………… E-8

To toggle the Timekeeping Mode time between DST and

Standard Time ………………………………………………………………E-14

To turn on illumination …………………………………………………………E-17

World Time ………………………………………………………………………………E-18

To view the time for another city code ………………………………………E-18

To toggle a city code time between Standard Time and

Daylight Saving Time ………………………………………………………E-19

To change your Home Time city to the current World Time city …………E-20

E-2

• Note that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

E-1

About This Manual

• Depending on the model of your watch, digital display

text appears either as dark figures on a light

background, or light figures on a dark background. All

examples in this manual are shown using dark figures

on a light background.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Operation Guide 3458

E-19

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D (east) or

B (west) to

display the city code (time zone) whose Standard Time/

Daylight Saving Time setting you want to change.

2. Hold down A for about one second to toggle Daylight

Saving Time ( displayed) and Standard Time ( DST DST

not displayed).

• The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

• Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes

are not affected.

• Note that you cannot switch between Standard Time

and Daylight Saving Time while UTC is selected as

the city code.

DST indicator

E-18

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing

(page E-6).

To view the time for another city code

In the World Time Mode, press

D to scroll eastwardly

through city codes, or B to scroll westwardly.

• For full information about city codes, see the “City Code

Table” at the back of this manual.

• If the current time for a city is wrong, check your

Timekeeping Mode time and time zone settings and

make the necessary changes.

City code

Current time and date in

the zone of the selected

city code

E-17

Illumination

An LED (light-emitting diode) illuminates the display for easy reading in the dark.

Illumination Precautions

• The illumination provided by the light may be hard to see when viewed under direct

sunlight.

• Illumination automatically turns off whenever an alarm sounds.

• Frequent use of illumination runs down the battery.

To turn on illumination

In any mode, press L to turn on illumination.

• You can use the procedure above to select either 1.5 seconds or 3 seconds as the

illumination duration. When you press L, the illumination will remain on for about

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

E-16

4. Press D to toggle between Daylight Saving Time ( displayed) and Standard

Time ( displayed).

5. After the settings are the way you want, press

Changing Your Home City Time

Use the following procedure to change your current Home City Time to any one of the

three Local Times.

1. In the Timekeeping Mode, press

D to display the Local Time which you want to

make your Home City Time.

2. Press A and B at the same time.

• This makes the Local Time you selected in step 1 your new Home City Time.

E-15

12/24-Hour Format

• With the 12-hour format, the PM indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

1. Display the Local Time whose city setting you want to change, and then hold down

A for about two seconds until the current city code starts to flash.

2. Use D (east) and B (west) to select the city code you want.

3. Press C to display the DST setting screen.

E-14

To toggle the Timekeeping Mode time between DST and Standard Time

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time

( displayed) and Standard Time ( displayed).

5. Press A to exit the setting screen.

• The DST

indicator appears on the Timekeeping

screen to indicate that Daylight Saving Time is turned

on.

DST indicator

E-13

5. Press A to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date

(year, month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-12

Screen To do this: Do this:

Reset the seconds to . Press

Toggle between Daylight Saving Time ( ) and

Standard Time ( ). Press D.

Change the city code. Use

D (east) and B (west).

Change the hour or minutes. Use

D (+) and B (–).

Toggle between 12-hour ( ) and 24-hour ( )

timekeeping. Press D.

Change the year. Use

D (+) and B (–).

Change the month or day. Use

D (+) and B (–).

Toggle the setting between 1.5 seconds ( ) and

3 seconds ( ). Press D.

• See “Daylight Saving Time (DST)” on page E-13 for details about DST setting.

E-11

Changing the Current Home City Time and Date Settings

1. Use D to display the current Home City Time (T-1)

screen.

2. Hold down A until the seconds start to flash, which

indicates the setting screen.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Minutes

12/24-Hour

Format

Illumination

Duration Setting

City CodeDST Hour

YearMonthDay

4. When the setting you want to change is flashing, use

D and B to change it as

described below.

E-10

• While the Home City Time (T-1) screen is displayed, pressing A will switch the day

of the week / month-day indication to the currently selected Home City code and

the T-1 indicator for about one second.

• You can change the current time setting for your Home City Time (T-1) only.

• For Local Times (T-2, T-3, T-4), you can change the city code and DST settings

only.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	G-Shock DW-5600BB-1
Bredde:	48.9 mm
Dybde:	13.4 mm
Højde:	42.8 mm
Vægt:	60 g
Vandfast:	Ja
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	2 År
Batteritype:	Lithium battery
Slagfast:	Ja
Alarmfunktion:	Ja
Produktdesign:	Casual
Se opkaldstype:	Analog & LCD-opkald
Vandbestandig dybde:	200 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Oval
Køn:	Hanstik
Stopurets nøjagtighed:	1 sek./side
Kalendertype:	Dag
Nedtællingsur:	Ja
Stopur målingskapacitet:	1/100
Nedtællingstimer område:	1 - 24 min.
Nedtællingstimer måleenheder:	Hour, Second