Casio G-Shock DW-5900BB-1ER Manual
Læs nedenfor 📖 manual på dansk for Casio G-Shock DW-5900BB-1ER (6 sider) i kategorien Ur. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 11.5 brugere
Side 1/6
Operation Guide 3465
E-9
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x To view the current Home City code setting, press A
while in the Timekeeping Mode.
x For full information on city codes, see the “City Code
Table” at the back of this manual.
Day of week
Seconds
Hour : Minutes
PM indicator
Day
E-8
Auto Return Features
x If you leave the watch in the Alarm Mode for two or three minutes without
performing any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with flashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves any
settings you have made up to that point and exits the setting screen.
Scrolling
The and buttons are used in various modes and setting screens to scroll B D
through data on the display. In most cases, holding down these buttons during a
scroll operation scrolls at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when
you last exited the mode appears first.
E-7
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
CC
E-6
General Guide
x Press C to change from mode to mode.
x In any mode, press B to illuminate the display.
Timekeeping Mode World Time Mode
C C
E-5E-4
Operating Precautions ..................................................................................... E-32
User Maintenance ............................................................................................ E-42
E-3
Countdown Timer............................................................................................. E-19
To use the countdown timer ......................................................................... E-19
To set the countdown start time ................................................................... E-20
Alarms ............................................................................................................... E-21
To set an alarm time ..................................................................................... E-22
To test the alarm ........................................................................................... E-23
To turn an alarm on and off .......................................................................... E-24
To turn the Hourly Time Signal on and off .................................................... E-25
Illumination ....................................................................................................... E-26
To illuminate the display ............................................................................... E-27
To specify the illumination duration .............................................................. E-27
Other Settings .................................................................................................. E-28
To turn the button operation tone on and off ................................................ E-28
Specifications ................................................................................................... E-30
E-2
Contents
About This Manual ............................................................................................. E-1
General Guide ..................................................................................................... E-6
Timekeeping ....................................................................................................... E-9
To set the time and date ............................................................................... E-10
To toggle the Timekeeping Mode time between DST and Standard Time .... E-13
World Time ....................................................................................................... E-14
To view the time in another city code ........................................................... E-14
To toggle a city code time
between Standard Time and Daylight Saving Time ................................... E-15
Stopwatch ......................................................................................................... E-17
To measure times with the stopwatch .......................................................... E-18
E-1
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MA1810-EA
©
2018 CASIO COMPUTER CO., LTD.
Operation Guide 3465
E-19
Countdown Timer
The countdown timer can be set within a range of
one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
x The countdown operation continues even if you exit the
Countdown Timer Mode.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
To use the countdown timer
Press while in the Countdown Timer Mode to start the countdown timer.D
x When the end of the countdown is reached, the alarm sounds for 10 seconds or
until you stop it by pressing any button. The countdown time is automatically reset
to its starting value after the alarm stops.
Minutes
Hours Seconds
E-18
To measure times with the stopwatch
Elapsed Time
D D D D A
Start Stop Resume Stop Reset
Split Time
D A A D A
Start Split
(SPL displayed)
Split release Stop Reset
Two Finishes
D A D A A
Start Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-17
Stopwatch
The stopwatch lets you measure elapsed time, split
times, and two finishes.
x The display range of the stopwatch is 59 minutes,
59.99seconds.
x The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
x All of the operations in this section are performed in the Stopwatch Mode, which
you enter by pressing (page E-7).C
Seconds
Minutes
1/100 seconds
E-16
Note
x The seconds count of the World Time is synchronized with the seconds count of
the Timekeeping Mode.
x All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
x The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the
Earth’s rotation.
E-15
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use to display the city D
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down for about one second to toggle between A
Daylight Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
x The DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x In the World Time Mode, you can switch the city code you currently have selected
as your Timekeeping Mode Home City between Standard Time and DST. The
setting you select in the World Time Mode will also be applied in the Timekeeping
Mode.
DST indicator
E-14
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time in another city code
In the World Time Mode, press to scroll through theD
available city codes. Holding down the button scrolls at
high speed.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
City code
Current time in the zone of
the selected city code
E-13
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to flash, which indicates the setting
screen.
2. Press twice to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time (DOn)
and Standard Time ( ).OF
4. Press to exit the setting screen.A
x The indicator is displayed on the TimekeepingDST
Mode and Alarm Mode screen while Daylight Saving
Time is turned on.
DST indicator
On/Off status
E-12
4. Press to exit the setting screen.A
x Resetting the seconds to while the current count is in the range of 30 to 59 00
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.00
x With the 12-hour format, the (PM) indicator appears to the left of the hour digitsP
for times in the range of noon to 11:59 p.m. and no indicator appears to the left of
the hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
E-11
3. When the setting you want to change is flashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to 00 Press D.
Change the city code Use (east) and (west).D B
Toggle between Daylight Saving Time (On)
and Standard Time (OF)Press D.
Change the hour or minutes Use (+) and (–).D B
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Press D.
Change the year, month, or day Use (+) and (–).D B
x See “Daylight Saving Time (DST)” (page E-13) for details about the DST setting.
E-10
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to flash, which indicates the setting
screen.
2. Press to move the flashing in the sequence shown C
below to select other settings.
Seconds MinutesHourDSTCity Code
Day 12/24-Hour FormatYearMonth
C C C
CCC
C C
C
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | G-Shock DW-5900BB-1ER |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio G-Shock DW-5900BB-1ER stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur Sinn
- Ur Obaku
- Ur Breo
- Ur Technaxx
- Ur La Crosse Technology
- Ur Valcom
- Ur Ice Watch
- Ur Lynx
- Ur PANERAI
- Ur Kogan
- Ur Balance
- Ur Eta
- Ur Bushnell
- Ur X-WATCH
- Ur Grand Seiko
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025