Casio G-Shock DW-5900RS-9ER Manual

Casio Ur G-Shock DW-5900RS-9ER

Læs gratis den danske manual til Casio G-Shock DW-5900RS-9ER (6 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Casio G-Shock DW-5900RS-9ER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Operation Guide 3465

E-9

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Read this before you set the time and date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a city code for your Home City (the city where you

normally use the watch) before you set the time and date.

x To view the current Home City code setting, press A

while in the Timekeeping Mode.

x For full information on city codes, see the “City Code

Table” at the back of this manual.

Day of week

Seconds

Hour : Minutes

PM indicator

Day

E-8

Auto Return Features

x If you leave the watch in the Alarm Mode for two or three minutes without

performing any operation, it automatically changes to the Timekeeping Mode.

x If you leave a screen with flashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically saves any

settings you have made up to that point and exits the setting screen.

Scrolling

The and buttons are used in various modes and setting screens to scroll B D

through data on the display. In most cases, holding down these buttons during a

scroll operation scrolls at high speed.

Initial Screens

When you enter the World Time or Alarm Mode, the data you were viewing when

you last exited the mode appears first.

E-7

Countdown Timer Mode

Alarm Mode Stopwatch Mode

E-6

General Guide

x Press C to change from mode to mode.

x In any mode, press B to illuminate the display.

Timekeeping Mode World Time Mode

C C

E-5E-4

Operating Precautions ..................................................................................... E-32

User Maintenance ............................................................................................ E-42

E-3

Countdown Timer............................................................................................. E-19

To use the countdown timer ......................................................................... E-19

To set the countdown start time ................................................................... E-20

Alarms ............................................................................................................... E-21

To set an alarm time ..................................................................................... E-22

To test the alarm ........................................................................................... E-23

To turn an alarm on and off .......................................................................... E-24

To turn the Hourly Time Signal on and off .................................................... E-25

Illumination ....................................................................................................... E-26

To illuminate the display ............................................................................... E-27

To specify the illumination duration .............................................................. E-27

Other Settings .................................................................................................. E-28

To turn the button operation tone on and off ................................................ E-28

Specifications ................................................................................................... E-30

E-2

Contents

About This Manual ............................................................................................. E-1

General Guide ..................................................................................................... E-6

Timekeeping ....................................................................................................... E-9

To set the time and date ............................................................................... E-10

To toggle the Timekeeping Mode time between DST and Standard Time .... E-13

World Time ....................................................................................................... E-14

To view the time in another city code ........................................................... E-14

To toggle a city code time

between Standard Time and Daylight Saving Time ................................... E-15

Stopwatch ......................................................................................................... E-17

To measure times with the stopwatch .......................................................... E-18

E-1

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions in this manual, especially the

information under “Operating Precautions” and “User Maintenance”.

MA1810-EA

2018 CASIO COMPUTER CO., LTD.

Operation Guide 3465

E-19

Countdown Timer

The countdown timer can be set within a range of

one minute to 24 hours. An alarm sounds when the

countdown reaches zero.

x The countdown operation continues even if you exit the

Countdown Timer Mode.

x All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-7).

To use the countdown timer

Press while in the Countdown Timer Mode to start the countdown timer.D

x When the end of the countdown is reached, the alarm sounds for 10 seconds or

until you stop it by pressing any button. The countdown time is automatically reset

to its starting value after the alarm stops.

Minutes

Hours Seconds

E-18

To measure times with the stopwatch

Elapsed Time

D D D D A

Start Stop Resume Stop Reset

Split Time

D A A D A

Start Split

(SPL displayed)

Split release Stop Reset

Two Finishes

D A D A A

Start Split

First runner

finishes.

Display time of

first runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

E-17

Stopwatch

The stopwatch lets you measure elapsed time, split

times, and two finishes.

x The display range of the stopwatch is 59 minutes,

59.99seconds.

x The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

x The stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

x Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

x All of the operations in this section are performed in the Stopwatch Mode, which

you enter by pressing (page E-7).C

Seconds

Minutes

1/100 seconds

E-16

Note

x The seconds count of the World Time is synchronized with the seconds count of

the Timekeeping Mode.

x All World Time Mode times are calculated from the current Home City time in the

Timekeeping Mode using UTC time differential values.

x The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the

Earth’s rotation.

E-15

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use to display the city D

code (time zone) whose Standard Time/Daylight Saving

Time setting you want to change.

2. Hold down for about one second to toggle between A

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

x The DST indicator is on the display whenever you display

a city code for which Daylight Saving Time is turned on.

x Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes are

not affected.

x In the World Time Mode, you can switch the city code you currently have selected

as your Timekeeping Mode Home City between Standard Time and DST. The

setting you select in the World Time Mode will also be applied in the Timekeeping

Mode.

DST indicator

E-14

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

x All of the operations in this section are performed in

the World Time Mode, which you enter by pressing C

(page E-6).

To view the time in another city code

In the World Time Mode, press to scroll through theD

available city codes. Holding down the button scrolls at

high speed.

x For full information about city codes, see the “City Code

Table” at the back of this manual.

x If the current time shown for a city is wrong, check your

Timekeeping Mode time and Home City code settings

and make the necessary changes.

City code

Current time in the zone of

the selected city code

E-13

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press twice to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (DOn)

and Standard Time ( ).OF

4. Press to exit the setting screen.A

x The indicator is displayed on the TimekeepingDST

Mode and Alarm Mode screen while Daylight Saving

Time is turned on.

DST indicator

On/Off status

E-12

4. Press to exit the setting screen.A

x Resetting the seconds to while the current count is in the range of 30 to 59 00

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to without changing the minutes.00

x With the 12-hour format, the (PM) indicator appears to the left of the hour digitsP

for times in the range of noon to 11:59 p.m. and no indicator appears to the left of

the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

x The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

E-11

3. When the setting you want to change is flashing, use and to change it as D B

described below.

Screen To do this: Do this:

Reset the seconds to 00 Press D.

Change the city code Use (east) and (west).D B

Toggle between Daylight Saving Time (On)

and Standard Time (OF)Press D.

Change the hour or minutes Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour 12H

(24H) timekeeping Press D.

Change the year, month, or day Use (+) and (–).D B

x See “Daylight Saving Time (DST)” (page E-13) for details about the DST setting.

E-10

To set the time and date

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press to move the flashing in the sequence shown C

below to select other settings.

Seconds MinutesHourDSTCity Code

Day 12/24-Hour FormatYearMonth

C C C

CCC

C C

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	G-Shock DW-5900RS-9ER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock DW-5900RS-9ER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025