Casio G-Shock GLX-5600KI-7ER Manual

Casio Ur G-Shock GLX-5600KI-7ER

Læs gratis den danske manual til Casio G-Shock GLX-5600KI-7ER (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Casio G-Shock GLX-5600KI-7ER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Operation Guide 3151

MO0803-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

Warning!

•The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonably accurate representations only.

•The longitude, lunitidal interval, Moon phase indicator and tide graph data that

appear on the display of this watch are not intended for navigation purposes.

Always use proper instruments and resources to obtain data for navigation

purposes.

•This watch is not an instrument for calculating low tide and high tide times. The

tide graph of this watch is intended to provide a reasonable approximation of tidal

movements only.

•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Fur ther details and technical information can be

found in the “Reference” section.

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Stopwatch Mode

World Time ModeTide/Moon Data Mode

Countdown Timer ModeAlarm Mode

Press C.

Timekeeping Mode

▲

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

•The tide graph shows tidal movements for the current

date in accordance with the current time as kept in the

Timekeeping Mode.

•The Moon phase indicator shows the current Moon

phase in accordance with the current date as kept in the

Timekeeping Mode.

Important!

•Be sure to configure the current time and date, and your

Home Site data (data for the site where you use the

watch) correctly before using the functions of this watch.

See “Home Site Data” for more information.

Day of week

Month – Day

Tide graph

Moon phase indicator

Hour : Minutes Seconds

PM indicator

Setting the Time and Date

This watch is preset with UTC differential values that represent each time zone

around the globe. Before setting the time, be sure to set the UTC differential for your

Home Site first, which is the location where you normally will be using the watch.

•Note that World Time Mode times are all displayed based on the time and date

settings you configure in the Timekeeping Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

•Be sure to configure the correct UTC differential for

your Home Site before configuring any other

Timekeeping Mode settings.

•See the “UTC Differential/City Code List” for information

about the UTC differential settings that are supported.

Seconds

2. Press C to move the flashing in the sequence shown below to select other

settings.

Hour

UTC

Differential Minutes

Year

DST

Day Month

Seconds

Flash Alert

3. When the setting you want to change is flashing, use D B and to change it as

described below.

Reset the seconds to 00

Toggle between Daylight Saving

Time (ON) and Standard Time

(OFF)

Press D.

To do this: Do this:Screen

•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.

•When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in

0.5-hour units.

• For information about Flash Alert, see “Flash Alert”.

4. Press A twice to exit the setting screen.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Specify the UTC differential

Change the hour or minutes

Change the year, month or day

Use D (+) and B (–).

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-

hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1.In the Timekeeping Mode, hold down until theA

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press to toggle between Daylight Saving Time (DON

displayed) and Standard Time ( displayed).OFF

4. Press twice to exit the setting screen.A

•The DST indicator appears on the Timekeeping, and

Tide/Moon Data screens to indicate that Daylight Saving

Time is turned on. In the case of the Tide/Moon Data

Mode, the DST indicator appears on the Tide Data

screen only.

Home Site Data

Moon phase, tide graph data, and Tide/Moon Data Mode data will not be displayed

properly unless Home Site data (UTC differential, longitude and lunitidal interval) is

configured correctly.

DST indicator

On/Off status

•The UTC differential indicates the time differential with Greenwich, England.

•The letters UTC is the abbreviation for Coordinated Universal Time, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

•The lunitidal interval is the time elapsing between the Moon’s transit over a meridian

and the next high tide at that meridian. See “Lunitidal Interval” for more information.

•This watch displays lunitidal intervals in terms of hours and minutes.

•The “Site/Lunitidal Interval Data List” provides UTC differential and longitude

information around the world.

•The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch and whenever you have the battery replaced. Change these

settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,

20 minutes)

To configure Home Site data

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press twice to display the UTC differential settingC

screen, and confirm that the setting is correct.

•If the UTC differential setting is not correct, use D (+)

and B (–) to change it.

3. Press to display the longitude value setting screen.A

4. Press C to move the flashing in the sequence shown

below to select other settings.

Lunitidal Interval

Hours

Lunitidal Interval

Minutes

Longitude

(East/West)

Longitude

Value

Longitude value

Longitude (East/West)

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	G-Shock GLX-5600KI-7ER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock GLX-5600KI-7ER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio G-Shock GW-9400 Manual

23 Oktober 2025

Casio G-Shock GA-S110 Manual

14 September 2025

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Seiko YL50 Manual

11 December 2025

Suunto Vertical 2 Manual

3 December 2025

Breitling Super Chronomat B19 44 Perpetual Calendar Manual

7 November 2025

Swiss Military Hanowa Immersion Chrono Manual

31 Oktober 2025

Breitling Lady Premier 32 Manual

31 Oktober 2025

Grandeux FS21 Manual

29 Oktober 2025

Breitling Lady Premier Automatic 36 Manual

29 Oktober 2025

Swiss Military Hanowa Ace Chrono Manual

26 Oktober 2025

Swiss Military Hanowa Aerograph Night Vision Manual

26 Oktober 2025

Swiss Military Hanowa Afterburner Chrono Manual

26 Oktober 2025