Casio G-Shock GLX5600 Manual

Casio Ur G-Shock GLX5600

Læs gratis den danske manual til Casio G-Shock GLX5600 (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Casio G-Shock GLX5600, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Operation Guide 3151

MO0803-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

Warning!

•The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonably accurate representations only.

•The longitude, lunitidal interval, Moon phase indicator and tide graph data that

appear on the display of this watch are not intended for navigation purposes.

Always use proper instruments and resources to obtain data for navigation

purposes.

•This watch is not an instrument for calculating low tide and high tide times. The

tide graph of this watch is intended to provide a reasonable approximation of tidal

movements only.

•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Stopwatch Mode

World Time ModeTide/Moon Data Mode

Countdown Timer ModeAlarm Mode

Press C.

Timekeeping Mode

▲

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

•The tide graph shows tidal movements for the current

date in accordance with the current time as kept in the

Timekeeping Mode.

•The Moon phase indicator shows the current Moon

phase in accordance with the current date as kept in the

Timekeeping Mode.

Important!

•Be sure to configure the current time and date, and your

Home Site data (data for the site where you use the

watch) correctly before using the functions of this watch.

See “Home Site Data” for more information.

Day of week

Month – Day

Tide graph

Moon phase indicator

Hour : Minutes Seconds

PM indicator

Setting the Time and Date

This watch is preset with UTC differential values that represent each time zone

around the globe. Before setting the time, be sure to set the UTC differential for your

Home Site first, which is the location where you normally will be using the watch.

•Note that World Time Mode times are all displayed based on the time and date

settings you configure in the Timekeeping Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

•Be sure to configure the correct UTC differential for

your Home Site before configuring any other

Timekeeping Mode settings.

•See the “UTC Differential/City Code List” for information

about the UTC differential settings that are supported.

Seconds

2. Press C to move the flashing in the sequence shown below to select other

settings.

Hour

UTC

Differential

Minutes

Year

DST

Day

Month

Seconds

Flash Alert

3. When the setting you want to change is flashing, use D B and to change it as

described below.

Reset the seconds to 00

Toggle between Daylight Saving

Time (

ON) and Standard Time

(

OFF)

Press D.

To do this: Do this:Screen

•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.

•When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in

0.5-hour units.

• For information about Flash Alert, see “Flash Alert”.

4. Press A twice to exit the setting screen.

•The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Specify the UTC differential

Change the hour or minutes

Change the year, month or day

Use D (+) and B (–).

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-

hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1.In the Timekeeping Mode, hold down until theA

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press to toggle between Daylight Saving Time (D

displayed) and Standard Time ( displayed).OFF

4. Press twice to exit the setting screen.A

•The DST indicator appears on the Timekeeping, and

Tide/Moon Data screens to indicate that Daylight Saving

Time is turned on. In the case of the Tide/Moon Data

Mode, the DST indicator appears on the Tide Data

screen only.

Home Site Data

Moon phase, tide graph data, and Tide/Moon Data Mode data will not be displayed

properly unless Home Site data (UTC differential, longitude and lunitidal interval) is

configured correctly.

DST indicator

On/Off status

•The UTC differential indicates the time differential with Greenwich, England.

•The letters UTC is the abbreviation for Coordinated Universal Time, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

•The lunitidal interval is the time elapsing between the Moon’s transit over a meridian

and the next high tide at that meridian. See “Lunitidal Interval” for more information.

•This watch displays lunitidal intervals in terms of hours and minutes.

•The “Site/Lunitidal Interval Data List” provides UTC differential and longitude

information around the world.

•The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch and whenever you have the battery replaced. Change these

settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,

20 minutes)

To configure Home Site data

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press twice to display the UTC differential settingC

screen, and confirm that the setting is correct.

•If the UTC differential setting is not correct, use D (+)

and B (–) to change it.

3. Press to display the longitude value setting screen.A

4. Press C to move the flashing in the sequence shown

below to select other settings.

Lunitidal Interval

Hours

Lunitidal Interval

Minutes

Longitude

(East/West)

Longitude

Value

Longitude value

Longitude (East/West)

Operation Guide 3151

5. While the setting you want to change is flashing, use D B and to change it as

described below.

Setting

Longitude Value

Longitude

(East/West)

Lunitidal Interval

Hours, Minutes

Button Operations

Use D (+) and B (–) to change the setting.

•You can specify a value from 0 to 180° °, in 1-

degree units.

Use D to switch between east longitude (

)

and west longitude ( ).

Use D (+) and B (–) to change the setting.

6. Press A to exit the setting screen.

Screen

Tide/Moon Data

Tide/Moon data lets you view the Moon age and the Moon

phase for a particular date, and tidal movements for a

particular date and time for your Home Site.

•When you enter the Tide/Moon Data Mode, the data for

6:00 a.m. on the current date appears first.

•If you suspect that the Tide/Moon data is not correct for

some reason, check the Timekeeping Mode data

(current time, date, and Home Site settings), and make

changes as required.

•See “Moon Phase Indicator” for information about the

Moon phase indicator and “Tide Graph” for information

about the tide graph.

•All of the operations in this section are performed in the

Tide/Moon Data Mode, which you enter by pressing C.

Month – Day

Tide graph

Moon phase indicator

Time

Tide/Moon Data Screens

In the Tide/Moon Data Mode, press to toggle between the Tide Data screen andA

the Moon Data screen.

Press .A

Moon Data ScreenTide Data Screen

▲

Moon phase indicator

Time Moon age

Tide graph

Month – Day

•While the Tide Data screen is displayed, press to advance to the next hour.D

•While the Moon Data screen is displayed, press to advance to the next day.D

•You also can specify a particular date (year, month, day) to view its tide data and

Moon data. See “To specify a date” for more information.

•When you enter the Tide/Moon Data Mode, the screen (tide data or Moon data) that

was displayed the last time you exited the mode appears first.

To specify a date

1. In the Tide/Moon Data Mode, hold down A until the

year setting starts to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

Month DayYear

Month – DayYear

3. While a setting is flashing, use (+) or (–) to change it.D B

•You can specify a date in the range of January 1, 2000 to December 31, 2099.

4. Press A to exit the setting screen.

5. Use to display either the Tide Data screen or the Moon Data screen.A

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

•The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check the UTC differential of

your Home Site Data (Home City) and the current

setting of the Timekeeping Mode time.

•Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “UTC Differential/City Code List” for

information about the UTC differential settings that are

supported.

•All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

City code

Current time in

selected city

To view the time in another city

While in the World Time Mode, press D to scroll eastwardly through the city codes

(time zones).

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A to toggle between Daylight Saving Time

(DST indicator displayed) and Standard Time (DST

indicator not displayed).

•The DST indicator is shown on the World Time Mode

screen while Daylight Saving Time is turned on.

•Note that changing the Daylight Saving Time for any city

code causes the setting to be applied to all city codes.

DST indicator

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes. It also includes Auto-Start.

•The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

1/100 second

Hours

Minutes

Seconds

To measure times with the stopwatch

Start Stop

Elapsed Time

➤

Re-start Clear

➤

Stop

➤

D➤

Split Time

Start Split

➤

Split release Clear

➤

Stop

➤

Two Finishes

Split

➤

Stop

Clear

➤

Split release

➤

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

(SPL displayed)

Start

About Auto-Start

With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation

starts automatically when the countdown reaches zero.

During the final three seconds of the countdown, a beeper sounds with each second.

To use Auto-Start

1. While the stopwatch screen is showing all zeros in the

Stopwatch Mode, press A.

•This displays a 5-second countdown screen.

•To return to the all zeros screen, press A again.

2. Press D to start the countdown.

•When the countdown reaches zero, a tone sounds and a

stopwatch timing operation starts automatically.

•Pressing D while the Auto-Start countdown is in

progress will start the stopwatch immediately.

Countdown Timer

You can set the countdown timer within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero. The countdown timer also has an

auto

repeat feature and a progress beeper that signals

the progress of the countdown.

•All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing C.

Configuring the Countdown Timer

The following are the settings you should configure before

actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress

beeper on/off

•See “To configure the countdown timer” for information

about setting up the timer.

Hours

Minutes

Seconds

Auto-repeat

When auto-repeat is turned on, the countdown restarts automatically from the

countdown start time when it reaches zero. If left running, the countdown is repeated a

total of eight times, after which it stops automatically.

When auto-repeat is turned off, the countdown stops when it reaches zero and the

display shows the original countdown start time.

•Pressing D while an auto-repeat countdown is in progress pauses the current

countdown. You can resume the auto-repeat countdown by pressing , or you canD

press A to reset to the countdown time starting value.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes the

types of beeper operations the watch performs during a countdown.

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero.

•When the progress beeper is turned off, the countdown end beeper sounds for

about 10 seconds, or until you press any button to stop it.

•When the progress beeper is turned on, the countdown end beeper sounds for

about one second.

Progress Beeper

When the progress beeper is turned on, the watch uses beeps to signal countdown

progress as described below.

•Starting from five minutes before the end of the countdown, the watch emits four

short beeps at the top of each countdown minute.

•30 seconds before the end of the countdown, the watch emits four short beeps.

•The watch emits a short beep for each of the last 10 seconds of the countdown.

•If the countdown start time is six minutes or greater, the watch emits a short beep for

each second of the final 10 seconds before the five-minute point is reached. Four

short beeps are emitted to signal when the five-minute point is reached.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	G-Shock GLX5600

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock GLX5600 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025