Casio G-Shock GWF-D1000B-1LTD Manual

Casio Ur G-Shock GWF-D1000B-1LTD

Læs gratis den danske manual til Casio G-Shock GWF-D1000B-1LTD (17 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Casio G-Shock GWF-D1000B-1LTD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/17
E-7
Using the Stopwatch ……………………………………………………………………………………… E-82
To enter the Stopwatch Mode ……………………………………………………………………… E-82
To perform an elapsed time operation …………………………………………………………… E-82
To pause at a split time ……………………………………………………………………………… E-82
To measure two fi nishes …………………………………………………………………………… E-83
Using the Countdown Timer ……………………………………………………………………………… E-84
To enter the Countdown Timer Mode ……………………………………………………………… E-84
To specify the countdown start time ……………………………………………………………… E-84
To perform a countdown timer operation ………………………………………………………… E-85
To stop the alarm …………………………………………………………………………………… E-85
Using the Alarm …………………………………………………………………………………………… E-86
To enter the Alarm Mode …………………………………………………………………………… E-86
To set an alarm time ………………………………………………………………………………… E-87
To turn an alarm and the Hourly Time Signal on and off………………………………………… E-88
To stop the alarm …………………………………………………………………………………… E-89
To test the alarm …………………………………………………………………………………… E-89
Checking the Current Time in a Different Time Zone ………………………………………………… E-90
To enter the World Time Mode …………………………………………………………………… E-90
To view the time in another time zone …………………………………………………………… E-90
To specify standard time or daylight saving time (DST) for a city ……………………………… E-91
E-6
Using the Diving Functions ……………………………………………………………………………… E-35
To display water temperature ……………………………………………………………………… E-36
To take a direction reading ………………………………………………………………………… E-36
To display the surface time ………………………………………………………………………… E-41
To reset 0-meter depth manually ………………………………………………………………… E-41
Specifying Temperature and Water Depth Display Units …………………………………………… E-57
To specify temperature and water depth display units ………………………………………… E-57
Viewing Diving Log Records …………………………………………………………………………… E-59
To view log records ………………………………………………………………………………… E-59
To delete a specifi c log record ……………………………………………………………………… E-61
To delete all log records …………………………………………………………………………… E-62
Taking Direction Readings ……………………………………………………………………………… E-64
To take a direction reading ………………………………………………………………………… E-64
To perform fi gure 8 calibration ……………………………………………………………………… E-70
To perform 3-point calibration ……………………………………………………………………… E-72
To perform magnetic declination correction ……………………………………………………… E-75
To store a direction angle reading in Bearing Memory ………………………………………… E-76
Viewing Time Stamp Records (Time Recall) ………………………………………………………… E-79
To create a time stamp record ……………………………………………………………………… E-79
To view time records ………………………………………………………………………………… E-79
To delete a specifi c time stamp record …………………………………………………………… E-81
To delete all time stamp records …………………………………………………………………… E-81
E-5
Contents
About This Manual …………………………………………………………………………………………… E-2
Things to check before using the watch ………………………………………………………………… E-3
Charging the Watch …………………………………………………………………………………………… E-9
To recover from the sleep state …………………………………………………………………… E-13
Radio Controlled Atomic Timekeeping ………………………………………………………………… E-14
To get ready for a receive operation ……………………………………………………………… E-16
To perform manual receive ………………………………………………………………………… E-18
To check the latest signal reception results ……………………………………………………… E-21
To turn auto receive on or off ……………………………………………………………………… E-21
Mode Reference Guide …………………………………………………………………………………… E-23
Timekeeping ………………………………………………………………………………………………… E-29
Confi guring Home City Settings ………………………………………………………………………… E-30
To confi gure Home City and summer time settings ……………………………………………… E-30
Confi guring Current Time and Date Settings Manually ……………………………………………… E-32
To change the current time and date settings manually ………………………………………… E-32
E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City and summer time settings” (page E-30) to confi gure your
Home City and daylight saving time settings.
Important!
• Proper time calibration signal reception, and World Time Mode data depend on correct Home City,
time, and date settings in the Timekeeping Mode. Make sure you confi gure these settings correctly.
3. Set the current time.
• To set the time using a time calibration signal
See “To get ready for a receive operation” (page E-16).
• To set the time manually
See “Confi guring Current Time and Date Settings Manually” (page E-32).
The watch is now ready for use.
• For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic
Timekeeping” (page E-14).
E-3
Things to check before using the watch
1. Check the battery power level.
Is “H” or “M” displayed for the battery power indicator (page E-10)? Battery power
indicator
Does any one of the following conditions exist?
• Battery power indicator shows “
L” and “LOW” is fl ashing on the
display.
• “CHG” is fl ashing on the display.
• The face is blank.
The watch is charged
suffi ciently.
For details about
charging, see
“Charging the Watch”
(page E-9).
Go to step 2.
Power is low. Charge the watch by placing it in a location
where it is exposed to light. For details, see “Charging the
Watch” (page E-9).
NO
YES
YES
NEXT
E-2
About This Manual
• Button operations are indicated using the letters shown in the
illustration.
• Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-1
ENGLISH
Important!
• The watch’s water depth measurement function is intended to be used as a backup depth gauge.
• Whenever you use the digital compass of this watch for serious diving or other activities, be sure to
always take along another underwater compass to confi rm readings. If the readings produced by the
digital compass of this watch are different from those of the other compass, perform directional
calibration of the digital compass to ensure more accurate readings.
• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a
permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or
electrical household appliances (TV, computer, cellphone, etc.)
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure direction, barometric pressure, temperature, and water depth.
Measured values are then shown on the display. Such features make this watch useful when diving or
when engaging in other such outdoor activities.
Warning !
• The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
•
When engaging in diving or other activities in which losing your way can create a dangerous or
life-threatening situation, always use a second underwater compass to confi rm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of your watch or its malfunction.
E
MO1702-EB © 2016 CASIO COMPUTER CO., LTD.
Operation Guide 3445
E-15
Approximate Reception Ranges
UK and German Signals
Japanese Signals Chinese Signal
North American Signal
Anthorn
500 kilometers
1,500 kilometers
The Anthorn signal is
receivable within this area Mainfl ingen
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
For the Honolulu and Anchorage time zones, the
signal can be received when reception conditions
are favorable.
Fukushima
500 kilometers
1,000 kilometers
Fukuoka/Saga
Signals are receivable in the Taiwan area
when reception conditions are good.
500 kilometers
1,500 kilometers
Changchun
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
E-14
Radio Controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting accordingly. However, when
using the watch outside of areas covered by time calibration signals, you will have to adjust the settings
manually as required. See “Confi guring Current Time and Date Settings Manually” (page E-32) for more
information.
This section explains how the watch updates its time settings when the city code selected as the Home
City is in Japan, North America, Europe, or China, and is one that supports time calibration signal
reception.
If your Home City Code setting is this: The watch can receive the signal from the transmitter
located here:
LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW Anthorn (England), Mainfl ingen (Germany)
HKG, BJS Shangqiu City (China)
TPE, SEL, TYO Fukushima (Japan), Fukuoka/Saga (Japan)
HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ,
YYT Fort Collins, Colorado (United States)
Important!
• The areas covered by MOW, HNL and ANC are quite far from the calibration signal transmitters, so
certain conditions may cause reception problems.
• When HKG or BJS is selected as the Home City, only the time and date are adjusted according to the
time calibration signal. You need to switch manually between standard time and daylight saving time
(DST) if required. See “To confi gure Home City and summer time settings” (page E-30) for information
about how to do this.
E-13
Power Saving
When turned on, Power Saving enters a sleep state automatically whenever the watch is left for a certain
period in an area where it is dark. The table below shows how watch functions are affected by Power
Saving.
• For information about enabling and disabling power saving, see “To enable or disable Power Saving”
(page E-111).
• There actually are two sleep state levels: “display sleep” and “function sleep”.
Elapsed Time in Dark Display Operation
60 to 70 minutes (display sleep) Blank, with
PS fl ashing Display is off, but all functions are enabled.
6 or 7 days (function sleep) Blank, with
PS not fl ashing
All functions except for timekeeping and
stopwatch elapsed time measurement are
disabled.
• The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is already in a sleep
state when 6:00 AM arrives, however, it will remain in the sleep state.
• The watch will not enter a sleep state while it is in the Stopwatch Mode, Countdown Timer Mode, or
Diving Mode.
To recover from the sleep state
Move the watch to a well-lit area, press any button, or angle the watch towards your face for reading (page
E-107).
E-12
• If all of the battery power indicators (H,
M, L) are fl ashing and the
CHG (charge) indicator also is
fl ashing, it means the battery level is very low. Expose the watch to bright light as soon as possible.
• Even if battery power is at Level 1 (
H) or Level 2 (M), the Digital Compass Mode, Thermometer Mode,
or Diving Mode sensor may be disabled if there is not enough voltage available to power it suffi ciently.
This is indicated when all of the battery power indicators (
H, M, L) are fl ashing.
• Frequent fl ashing of all of the battery power indicators (
H, M, L) probably means that remaining battery
power is low. Leave the watch in bright light to allow it to charge.
Charging Times
Exposure Level (Brightness)
Daily
Operation
*1
Level Change *2
Level 5 Level 4 Level 3 Level 2 Level 1
Outdoor sunlight (50,000 lux) 5 min. 2 hours 14 hours 4 hours
Sunlight through a window (10,000 lux)
24 min. 6 hours 71 hours 19 hours
Daylight through a window on a
cloudy day (5,000 lux) 48 min. 11 hours 143 hours 39 hours
Indoor fl uorescent lighting (500 lux) 8 hours 142 hours – – – – – –
*1 Approximate amount of exposure time required each day to generate enough power for normal daily
operation.
*2 Approximate amount of exposure time (in hours) required to take power from one level to the next.
• The above exposure times all are for reference only. Actual exposure times depend on lighting
conditions.
• For details about the operating time and daily operating conditions, see the “Power Supply” section of
the Specifi cations (page E-125).
E-11
Level Battery Power Indicator Function Status
4
(CHG)
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
ll
l
l
l
l
l
l
l
l
l
l
Except for the current time and the
CHG
(charge) indicator, all functions and display
indicators disabled.
5 – – – All functions disabled.
• The fl ashing LOW indicator at Level 3 (
L) tells you that battery power is very low, and that exposure to
bright light for charging is required as soon as possible.
• At Level 5, all functions are disabled and settings return to their initial factory defaults. Once the battery
reaches Level 2 (M) after falling to Level 5, reconfi gure the current time, date, and other settings.
• Display indicators reappear as soon as the battery is charged from Level 5 to Level 2 (M).
• Leaving the watch exposed to direct sunlight or some other very strong light source can cause the
battery power indicator to show a reading temporarily that is higher than the actual battery level. The
correct battery level should be indicated after a few minutes.
• All data stored in memory is deleted, and the current time and all other settings return to their initial
factory defaults whenever battery power drops to Level 5 and when you have the battery replaced.
Power Recovery Mode
• Performing multiple sensor, illumination, or beeper operations during a short period may cause all of
the battery power indicators (H, M, and L) to start fl ashing on the display. This indicates that the watch
is in the power recovery mode. Illumination, alarm, countdown timer alarm, hourly time signal, and
sensor operations will be disabled until battery power recovers.
• Battery power will recover in about 15 minutes. At this time, the battery power indicators (
H, M, L) will
stop fl ashing. This indicates that the functions listed above are enabled again.
E-10
Important!
• Allowing the watch to become very hot can cause its liquid crystal display to black out. The
appearance of the LCD should become normal again when the watch returns to a lower temperature.
• Turn on the watch’s Power Saving function (page E-13) and keep it in an area normally exposed to bright
light when storing it for long periods. This helps to ensure that power does not run down.
• Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is
blocked from exposure to light can cause power to run down. Expose the watch to bright light
whenever possible.
Power Levels
You can get an idea of the watch’s power level by observing the battery power indicator on the display.
Level Battery Power Indicator Function Status
1
(H)
All functions enabled. Before using the
Diving Mode, charge the battery at least to
Level 2.
2
(M)
All functions enabled. Before using the
Diving Mode, charge the battery at least to
Level 2.
3
(L)
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Auto and manual receive, illumination,
beeper, Diving Mode, Digital Compass
Mode, Thermometer Mode, and Tide/Moon
Mode operation disabled.
Battery power
indicator
E-9
Charging the Watch
The face of the watch is a solar panel that generates power from light. The generated power charges a
built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed
to light.
Charging Guide
Whenever you are not wearing the
watch, leave it in a location where it
is exposed to light.
• Best charging performance is
achieved by exposing the watch to
the strongest light available.
When wearing the watch, make sure
that its face is not blocked from light
by the sleeve of your clothing.
• The watch may enter a sleep state
(page E-13) if its face is blocked by
your sleeve even only partially.
Warning!
Leaving the watch in bright light for charging can cause it to become quite hot.
Take care when handling the watch to avoid burn injury. The watch can become particularly hot
when exposed to the following conditions for long periods.
• On the dashboard of a car parked in direct sunlight
• Too close to an incandescent lamp
• Under direct sunlight
E-8
Taking Temperature Readings …………………………………………………………………………… E-92
To take temperature readings ……………………………………………………………………… E-92
To calibrate the temperature sensor ……………………………………………………………… E-94
Checking the Tide Level, Moon Phase, and Moon Age (Tide/Moon) ……………………………… E-95
To view the current tide level ……………………………………………………………………… E-95
To view the current moon phase …………………………………………………………………… E-97
To view the current Moon age ……………………………………………………………………… E-97
To view the tide level at a different time today …………………………………………………… E-100
To view the tide level, Moon phase, and Moon age for a specifi c date and time …………… E-100
To calibrate the high tide time ……………………………………………………………………… E-102
To specify Northern Hemisphere View or Southern Hemisphere View Moon Phase ………… E-104
Illumination ………………………………………………………………………………………………… E-106
To turn on illumination manually …………………………………………………………………… E-106
To change the illumination duration ……………………………………………………………… E-106
To enable or disable the auto light switch ………………………………………………………… E-108
Other Settings ……………………………………………………………………………………………… E-110
To enable or disable the button operation tone ………………………………………………… E-110
To enable or disable Power Saving ……………………………………………………………… E-111
Troubleshooting …………………………………………………………………………………………… E-112
Specifi cations ……………………………………………………………………………………………… E-122
Operation Guide 3445

Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: G-Shock GWF-D1000B-1LTD

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock GWF-D1000B-1LTD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Casio Manualer

Casio

Casio AE2000W-1AV Manual

5 September 2025
Casio

Casio AEQ-110 Manual

4 September 2025
Casio

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025
Casio

Casio Baby-G BSA-B100 Manual

27 Juli 2025
Casio

Casio G-Shock GM-110 Manual

27 Juli 2025
Casio

Casio G-Shock GM-S5600 Manual

27 Juli 2025
Casio

Casio Edifice EF-527D-1A Manual

27 Juli 2025
Casio

Casio Edifice EFR-571 Manual

27 Juli 2025
Casio

Casio G-Shock GST-S110 Manual

27 Juli 2025
Casio

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko

Grand Seiko 9F85 Manual

12 September 2025
Grand Seiko

Grand Seiko 9R01 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R65 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R02 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R15 Manual

11 September 2025
Citizen

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025
Citizen

Citizen L Mae EM1060-52N Manual

3 September 2025
Citizen

Citizen Corso Diamond EW2712-55E Manual

3 September 2025
Citizen

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025
Breitling

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025