Casio GG-1000RG-1A Manual

Casio Ur GG-1000RG-1A

Læs gratis den danske manual til Casio GG-1000RG-1A (8 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Casio GG-1000RG-1A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Congratulations upon your selection of this CASIO watch.

Applications

This watch has built-in sensors that measure direction and temperature.

Measurement results are indicated by the watch's hands and displays. These features make this watch

useful when hiking, mountain climbing, or when engaging in other such outdoor activities.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to conﬁ rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of your watch or its malfunction.

E E-1

ENGLISH

Important!

• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other

activities, always be sure to take along another compass to conﬁ rm readings. If the readings produced

by the digital compass of this watch are different from those of the other compass, perform bidirectional

calibration of the digital compass to ensure more accurate readings.

• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a

permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or

electrical household appliances (TV, computer, cellphone, etc.)

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-13) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

About This Manual …………………………………………………………………………………………… E-2

Things to check before using the watch ………………………………………………………………… E-3

Mode Reference Guide ……………………………………………………………………………………… E-7

Timekeeping ………………………………………………………………………………………………… E-12

Conﬁ guring Home City Settings ………………………………………………………………………… E-13

To conﬁ gure Home City settings …………………………………………………………………… E-13

To change the daylight saving time (summer time) setting……………………………………… E-14

Conﬁ guring Current Time and Date Settings ………………………………………………………… E-15

To change the current time and date settings …………………………………………………… E-15

Hand Home Position Adjustment ……………………………………………………………………… E-18

To adjust home positions …………………………………………………………………………… E-18

Using the Digital Compass ……………………………………………………………………………… E-20

To perform a digital compass operation …………………………………………………………… E-20

To perform bidirectional calibration ………………………………………………………………… E-24

To perform magnetic declination correction ……………………………………………………… E-26

To store a direction angle reading in Bearing Memory ………………………………………… E-27

Taking Temperature Readings …………………………………………………………………………… E-32

To take temperature readings ……………………………………………………………………… E-32

To calibrate the temperature sensor ……………………………………………………………… E-34

E-5

Specifying Temperature Unit …………………………………………………………………………… E-35

To specify the temperature unit …………………………………………………………………… E-35

Checking the Current Time in a Different Time Zone ………………………………………………… E-36

To enter the World Time Mode …………………………………………………………………… E-36

To conﬁ gure World Time City and summer time settings ……………………………………… E-36

To swap your Home Time and World Time Cities ……………………………………………… E-38

Using the Stopwatch ……………………………………………………………………………………… E-39

To enter the Stopwatch Mode ……………………………………………………………………… E-39

To perform an elapsed time operation …………………………………………………………… E-39

To pause at a split time ……………………………………………………………………………… E-39

To measure two ﬁ nishes …………………………………………………………………………… E-40

Using the Countdown Timer ……………………………………………………………………………… E-41

To enter the Countdown Timer Mode ……………………………………………………………… E-41

To specify the countdown start time ……………………………………………………………… E-41

To perform a countdown timer operation ………………………………………………………… E-42

To stop the alarm …………………………………………………………………………………… E-42

Using the Alarm …………………………………………………………………………………………… E-43

To enter the Alarm Mode …………………………………………………………………………… E-43

To set an alarm time ………………………………………………………………………………… E-44

To test the alarm …………………………………………………………………………………… E-44

To turn an alarm and the Hourly Time Signal on and off………………………………………… E-45

To stop the alarm …………………………………………………………………………………… E-45

E-6

Illumination ………………………………………………………………………………………………… E-46

To illuminate the display manually ………………………………………………………………… E-46

To change the illumination duration ……………………………………………………………… E-46

To enable or disable auto light……………………………………………………………………… E-48

Button Operation Tone …………………………………………………………………………………… E-50

To enable or disable the button operation tone ………………………………………………… E-50

Low Battery Indication …………………………………………………………………………………… E-51

Troubleshooting …………………………………………………………………………………………… E-52

Speciﬁ cations ……………………………………………………………………………………………… E-55

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-12

• Determine north and the bearing to a destination

• Record a bearing (Bearing Memory)

• Determine your current location using the watch and a map

Digital Compass Mode E-20

Determine the temperature at your current location Thermometer Mode E-32

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-36

Use the stopwatch to measure elapsed time Stopwatch Mode E-39

Use the countdown timer Countdown Timer Mode E-41

• Set an alarm time

• Turn the hourly time signal on or off Alarm Mode E-43

Operation Guide 5476

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.

Stopwatch Mode

Countdown Timer Mode

World Time Mode

Alarm Mode

E-9

• The mode dial hand indicates the watch’s current mode.

Timekeeping Mode

Thermometer Mode

Digital Compass Mode

Mode dial hand

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

D for about two seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Alarm, Digital Compass 3 minutes

Thermometer 1 to 2 minutes

Setting screen (digital setting ﬂ ashing) 3 minutes

Initial Screens

When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you

last exited the mode appears ﬁ rst.

Scrolling

The E and B buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-11

Digital Meter

• The digital meter indicates the seconds count in the Timekeeping Mode (page E-12), World Time Mode

(page E-36), and Timer Mode (page E-41). In the Stopwatch Mode (page E-39) it indicates the 1/10-second count.

• While viewing bearing memory contents in the Digital Compass mode (page E-20), the digital meter shows

a bearing pointer.

Digital Meter

E-12

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Each press of A in the Timekeeping Mode will change screen contents as shown below.

Mode dial hand

Day of week

Second hand

Minute hand PM indicator Seconds

Hour : Minutes

Hour hand

Month Day

Digital meter

Date Screen Time Screen

E-13

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use E (East) and B (West) to scroll through the available city codes.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press D.

• This will cause DST to appear in the upper display and the DST

setting of the currently selected Home City to appear in the lower

display.

4. Press E to toggle the DST setting between daylight saving time (

ON)

and standard time (

OFF ).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code

DST indicator

E-14

5. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display.

2. Press D.

• This will cause DST to appear in the upper display and the DST

setting of the currently selected Home City to appear in the lower

display.

3. Press E to toggle the DST setting between daylight saving time (

ON ) and standard time (OFF).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

E-15

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the

analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-18).

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the upper display.

City code

Operation Guide 5476

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	GG-1000RG-1A
Bredde:	55.3 mm
Dybde:	17.3 mm
Højde:	56.2 mm
Vægt:	94 g
Vandfast:	Ja
Urkassens materiale:	Resin, Stainless steel
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Elektronisk kompas:	Ja
Termometer:	Ja
Timer:	1h
Indikator for batteriniveau:	Ja
Urtype:	Armbåndsur
Batterilevetid:	2 År
LED-baggrundsbelysning:	Ja
Batteritype:	SR927W
Antal understøttede batterier:	2
Slagfast:	Ja
Urets glastype:	Mineral
Alarmfunktion:	Ja
Produktdesign:	Luksus
Se opkaldstype:	Analogopkald
Vandbestandigt tryk:	20 ATM
Vandbestandig dybde:	200 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rund
Hovedfarve på urskive:	Sort/guld
Se markørfarve:	Guld
Nøjagtighed:	±15 sek/md
Minimal driftstemperatur:	-10 °C
Maksimal driftstemperatur:	60 °C
Antal tidszoner:	31
Stopurets nøjagtighed:	0.01 sek./side
Kalendertype:	Dag
Se markørstil:	Arabiske numre/Ingen numre
Temperaturområde (T-T):	14 - 140 °F
Antal visere:	3
Skruebar krone:	Ja
Nedtællingsur:	Ja
Verdenstid funktkon:	Ja
Stopur målingskapacitet:	23:59'59.99"
Nedtællingstimer område:	1 - 60 min.
Nedtællingstimer måleenheder:	Minute, Second