Casio ID-13 Manual

Casio Ur ID-13

Læs gratis den danske manual til Casio ID-13 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Casio ID-13, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER’S GUIDE ID-13

Current Temperature

Current time

(Hour, minutes, seconds)

DATE (month - date)

PM indicator

Current Humidity

Day of the week

1 cm

•A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using

the clock.

•Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the

illustration.

GENERAL GUIDE

1Time Set buttons

Use these buttons to set the current time.

2SET button

Use this button when setting the current time.

3RESET button

Press to reset the clock after replacing batteries.

4° °C/ F button

Push the to select either Celsius (° °C/ F button °C) or Fahrenheit (°F).

USER’S GUIDE ID-13

2. While the screen you want is on the display, use the Time Set buttons (

to change the digits that are flashing.

•Holding down or changes the flashing digits at high speed.+ –

•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with

the date setting.

•Pressing or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.+ –

•Each press of + – or while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour

and 24-hour timekeeping.

3. After making the settings you want, use the SET button (

to display the Normal Timekeeping Screen.

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

Press + to increase

the flashing digits.

Press – to decrease

the flashing digits.

SETTING THE TIME

1. Press the SET button (

2) to cycle through the setting screens as shown below.

Month and Day Setting Screen

Time Setting Screen

Normal Timekeeping Screen

Year Setting Screen 12-hour/24-hour Timekeeping Screen

THERMOMETER FUNCTIONS

•A built-in sensor measures temperature and shows the measured value on the display. The readout from the

temperature sensor can also be switched between Celsius ( C) and Fahrenheit (° °F).

• ° °The temperature display shows “LO” for temperatures below –50 C (–58 F) and “HI” for temperatures above

70 F).°C (158°

• ° ° ° °Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such

readings are actually outside the guaranteed temperature range of this clock.

Switching between Celsius and Fahrenheit

• ° °Push the C/ F button (

to select either Celsius ( C) or Fahrenheit (° °F).

HYGROMETER FUNCTION

•A built-in sensor measures humidity and shows the measured value on the display.

•The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 95%.

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Pressing down lightly on the battery compartment cover, slide it downwards and remove it.

2. Remove both old batteries.

3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you

load batteries incorrectly, they can burst and damage the clock.

4. Replace the battery compartment cover.

5. Press the RESET button (

3). Be sure to press the RESET button (

3) after replacing batteries.

Battery precautions

•Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•Never charge the batteries that come with the clock.

•Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto

your skin.

•The batteries that come with the clock lose some of their power during transport and storage.

•Never mix old and new batteries, or batteries of different brands.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	ID-13

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio ID-13 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

21 Juni 2025

20 Juni 2025

19 Juni 2025

19 Juni 2025

Casio LTP-VT01G Manual

19 Juni 2025

Casio DQR-100 Manual

19 Juni 2025

Casio MTP-B130D Manual

19 Juni 2025

Casio DQD-106 Manual

19 Juni 2025

Casio W-218HC Manual

19 Juni 2025

Casio PDM-20B Manual

19 Juni 2025

Ur Manualer

Nyeste Ur Manualer

ELYSEE Start-Up 18012L Manual

21 Juni 2025

ELYSEE Sithon Automatic Calendar 13298 Manual

20 Juni 2025

ELYSEE Rally Timer I 80516MM Manual

20 Juni 2025

ELYSEE Monumentum Automatic 77021 Manual

20 Juni 2025

ELYSEE Rally Timer I 80516M Manual

19 Juni 2025

ELYSEE Rally Timer I 80531 Manual

19 Juni 2025

ELYSEE Diomedes Ii 83016 Manual

19 Juni 2025

ELYSEE Vintage Master 80545S Manual

19 Juni 2025

ELYSEE Diomedes Ii 83016L Manual

19 Juni 2025

Ice Watch Find Manual

19 Juni 2025