Casio LDF-52-1A Manual

Casio Ur LDF-52-1A

Læs gratis den danske manual til Casio LDF-52-1A (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Casio LDF-52-1A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3171

MA090 -EA5

About This Manual

•Depending on the model of your watch, display text appears either as dark figures

on a light background or light figures on a dark background. All sample displays in

this manual are shown using dark figures on a light background.

•Button operations are indicated using the letters shown in the illustration.

(Light) (Light)

Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode

Press .

•Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

General Guide

•Press C to change from mode to mode.

•In any mode, press L to illuminate the display.

3. When the setting you want to change is flashing, press B to change it as

described below.

•Pressing while the seconds are in the range of 30 to 59 resets them to andB00

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping andB

24-hour timekeeping.

•With the 12-hour format, the (PM) indicator appears to the left of the hour digits

for times in the range of noon to 11:59 p.m. and no indicator appears to the left of

the hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with

indicator.

•The and indicators are not displayed with the Timekeeping Mode time on the

Alarm Mode and Dual Time Mode screens.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

To change this setting

Seconds

Hour, Minutes, Year, Month,

Day, Day of week

Perform this button operation

Press .B to reset to 00

Press B to increase the setting.

Holding down changes the setting at high speed.B

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Hour Minutes

YearMonthDay of the week Day

PM indicator

Month – Day

Hour : Minutes

Day of week

Seconds

Alarm time

(Hour : Minutes)

Timekeeping Mode time

(Hour : Minutes)

Mode indicator

Alarm

When the daily alarm is turned on, the alarm tone sounds

when the alarm time is reached.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds,

regardless of the mode the watch is in.

Hourly time signal

on indicator

Alarm on indicator

To set an alarm time

1. In the Alarm Mode, hold down A until the hour setting

starts to flash, which indicates the setting screen.

•This operation automatically turns on the alarm.

2. Press C to move the flashing between the hour and

minutes.

3. While a setting is flashing, use B to increase it.

Holding down changes the setting at high speed.B

•With the 12-hour format, set the time correctly as a.m.

(no indicator) or p.m. ( indicator).

4. Press A to exit the setting screen.

To stop the alarm tone after it starts to sound

Press any button.

To turn the Daily Alarm and Hourly Time Signal on and off

In the Alarm Mode, press to cycle through the on andB

off settings as shown below.

Alarm On Indicator/Hourly Time Signal On Indicator

Daily alarm

only

Both offBoth on Hourly Time

Signal only

•The alarm on ( ) indicator flashes while the alarm is

sounding.

•The alarm on ( ) indicator and Hourly Time Signal on

( ) indicator are displayed in all modes.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.B

Operation Guide 3171

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

•The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .C

Minutes

Seconds Hours

Mode indicator

1/100 second

To measure times with the stopwatch

Elapsed time

Start Stop Re-start Stop Clear

Start Split

( displayed)SPL

Split release Stop Clear

Start Split Stop Split release Clear

Split time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Three-second indicator

Seconds Hour : Minutes

Timekeeping Mode time

(Hour : Minutes)

Mode indicator

Dual Time

The Dual Time Mode lets you keep track of time in a

different time zone.

•In the Dual Time Mode, the seconds count is

synchronized with the seconds count of the Timekeeping

Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode.

2. Hold down A until the hour setting starts to flash, which

indicates the setting screen.

3. Press C to move the flashing between the hour and

minutes settings.

4. Press B B to increase the setting. Holding down

changes the setting at high speed.

5. Press A to exit the setting screen.

Illumination

The watch has an EL (electro-Iuminescent) panel that

causes the entire display to glow for easy reading in the

dark.

•See “Illumination Precautions” for other important

information.

To illuminate the display

In any mode, press L to illuminate the display.

•You can specify 1.5 seconds or three seconds as the

illumination duration. See To specify the illumination“

duration” for more information.

To specify the illumination duration

In the Timekeeping Mode, hold down for about two seconds to toggle theB

illumination duration between three seconds ( displayed) and 1.5 seconds

( not displayed).

•Pressing B also toggles between 12-hour and 24-hour timekeeping.

•When the three-second setting is selected, the three-second ( ) indicator remains

on the display in all modes.

•To protect against running down the watch s battery, the watch automatically’

switches to the 1.5-second setting about seven hours after the three-second setting

is selected. To continue to use the three-second setting, perform the above

procedure again.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with flashing digits for one or two minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Illumination Precautions

•The electro-luminescent panel that provides illumination loses power after very long

use.

•Illumination may be hard to see when viewed under direct sunlight.

•Illumination automatically turns off whenever an alarm sounds.

•The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

•Frequent use of illumination runs down the battery.

Specifications

Accuracy at normal temperature: ±20 seconds a month

Timekeeping: Hour, minutes, seconds, p.m., month, day, day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Alarm:

Daily alarm; Hourly Time Signal

Stopwatch

Measuring unit: 1/100 second

Measuring capacity: 23:59' 59.99''

Measuring modes: Elapsed time, split time, two finishes

Dual Time: Hour, minutes, seconds, p.m.

Illumination: EL backlight (electro-luminescent panel); Selectable illumination

duration

Battery: One lithium battery (Type: CR1216)

Approximately 3 years on type CR1216 (assuming alarm operation 10 seconds/day,

and one light operation 1.5 seconds/day)

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	LDF-52-1A
Bredde:	23.6 mm
Dybde:	11.4 mm
Højde:	46.7 mm
Vægt:	25 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	3 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR1216
Antal understøttede batterier:	1
Urets glastype:	Resin
Alarmfunktion:	Ja
Se opkaldstype:	LCD-skive
Vandbestandigt tryk:	5 ATM
Vandbestandig dybde:	50 m
Husets farve:	Sort, sølv
Båndets hovedfarve:	Sort
Etui form:	Rektangulær
Nøjagtighed:	±20 sek/md
Kalendertype:	Dag