Casio PQ-65S Manual

Casio Ur PQ-65S

Læs gratis den danske manual til Casio PQ-65S (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Casio PQ-65S, eller vil du spørge andre brugere om produktet?

Side 1/3
Operation Guide PQ-65S
1
MA1205-EA
ILLUSTRATION
©
2012 CASIO COMPUTER CO., LTD.
1
2
3
6 7
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes,
seconds)
Day of the week
Current temperature
Date
(month - day)
PM indicator
Alarm time
Alarm on
indicator
Snooze on
indicator
Alarm Off Snooze Alarm On
Operation Guide PQ-65S
2
GENERAL GUIDE
11
11
1SNOOZE/LIGHT button
Press this button to illuminate the display for about five seconds.
Pressing this button while the alarm is sounding stops the alarm.
22
22
2Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
33
33
3+ / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
44
44
4
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
55
55
5SET button
Use this button when setting the current time.
66
66
6RESET button
Press this button to reset the clock after replacing its batteries.
77
77
7DEMO button
Press this button to test the alarm sound.
USING THE CLOCK
1. Press the SET button ( ) to cycle through the setting screens as shown below.5
12-hour/24-hour
Setting Screen
Time Setting ScreenMonth and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen Contrast Setting Screen
2. While the screen you want is displayed, use the + and buttons (3) to change the flashing digits.
Press
+
to
increase
the flashing
digits.
Press
to
decrease
the flashing
digits.
Holding down + or changes the flashing digits at high speed.
You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with
the date setting.
Pressing + or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
Each press of + or while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and
24-hour timekeeping.
You can set the contrast level in the range 1 to 10.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the ) toAlarm Mode selector (2
select the snooze alarm feature.
Setting the Alarm Time
Use the and buttons ( ) to set the alarm time.+ 3
Pressing the and buttons ( ) causes the alarm time to appear in place of the date on the display.+ 3
Press
+
to
change the
alarm time
setting.
Press
to
change the
alarm time
setting.
Holding down + or changes the digits at high speed.
Turning the Alarm On and Off
Use the ) on the side of the clock to turn the alarm on and off, and to select the snoozeAlarm Mode selector (2
feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.
The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
USING THE LIGHT
Pressing the ) turns on the light and illuminates the display for easy reading in the dark.SNOOZE/LIGHT button (1
Important!
Overuse of the light can shorten battery life.
Alarm Mode selector
SNZ
ON
OFF
Description
The alarm sounds at the preset time for one minute, and up to seven more times
every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/
LIGHT button (1), the alarm sounds again about five minutes later.
The indicator
flashes on the display to indicate that the snooze feature is
activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.


Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: PQ-65S

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio PQ-65S stil et spørgsmål nedenfor, og andre brugere vil svare dig