Casio SGW-300HD-1AVER Manual

Casio Ur SGW-300HD-1AVER

Læs gratis den danske manual til Casio SGW-300HD-1AVER (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Casio SGW-300HD-1AVER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Operation Guide 3202

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure barometric pressure, temperature and

altitude. Measured values are then shown on the display. Such features make this

watch useful when hiking, mountain climbing, or when engaging in other such outdoor

activities.

Warning !

•

The measurement functions built into this watch are not intended for taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of

this product or its malfunction.

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” to configure your Home

City and daylight saving time settings.

Important!

Proper World Time Mode data depend on correct Home City, time, and date settings

in the Timekeeping Mode. Make sure you configure these settings correctly.

2. Set the current time.

See “Configuring Current Time and Date Settings”.

The watch is now ready for use.

Mode Reference Guide

Your watch has 7 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode:

• View the current time and date in the Home City

•

Configure Home City and daylight saving time (DST) settings

• Configure time and date settings

Timekeeping Mode

View the barometric pressure and temperature at your

current location Barometer/Thermometer

Mode

• View the altitude at your current location

• Determine the altitude differential between two locations

(reference point and current location)

Altimeter Mode

View the current time in one of 48 cities (31 time zones)

around the globe World Time Mode

Use the stopwatch to measure elapsed time Stopwatch Mode

Use the countdown timer Countdown Timer Mode

Set an alarm time Alarm Mode

MO1004-EB

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between

modes.

• In any mode (except when a setting screen, with flashing digits is on the display),

press B to illuminate the display.

World Time

Mode

Barometer/

Thermometer Mode

Stopwatch Mode

Countdown

Timer Mode Alarm Mode

Altimeter Mode

Timekeeping Mode

World Time

Mode

Barometer/

Thermometer Mode

Stopwatch Mode

Countdown

Timer Mode Alarm Mode

Altimeter Mode

Timekeeping Mode

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• The watch returns to the Timekeeping Mode automatically if you do not perform any

button operation for two or three minutes in the Alarm Mode.

• The watch will return to the Timekeeping Mode automatically if you do not perform

any operation for about one hour after entering the Barometer/Thermometer Mode.

•

If you leave a setting screen with flashing digits on the display for two or three minutes

without performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears first.

Scrolling

The

B and D buttons are used on the setting screen to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

• In the Timekeeping Mode, the graphic in the center of

the display indicates the passage of seconds.

indicator

Day of

week

Month

Day

Seconds

Graphi

Hour : Minutes

indicator

Day of

week

Month

Day

Seconds

Graphi

Hour : Minutes

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down A until the

currently selected city code (Home City) starts to flash.

This is the city code setting screen.

• Before the city code starts to flash, the message

SET Hold will appear on the display. Keep A

depressed until SET Hold disappears and the city

code starts to flash.

• The watch will exit the setting mode automatically if

you do not perform any operation for about two or

three minutes.

• For details about city codes, see the “City Code

Table”.

2. Press D (East) and B (West) to select the city code

you want to use as your Home City.

• Keep pressing D or

B until the city code you want

to select as your Home City appears on the display.

3. Press C to display the DST setting screen.

Press

to toggle between Daylight Saving Time ( ) On

and Standard Time ( ).OFF

• Note that you cannot switch between standard

time and daylight saving time (DST) while UTC is

selected as your Home City.

After all the settings are the way you want, press

A to return to the Timekeeping Mode.

• The DST indicator appears to indicate that Daylight Saving Time is turned on.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current

time in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

indicator

City

code

Second

Hour : Minutes

indicator

City

code

Second

Hour : Minutes

Setting

DST indicator

Setting

DST indicator

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	SGW-300HD-1AVER
Vægt:	101 g
Dimensioner (BxDxH):	50 x 14.1 x 49.2 mm
Armbånd, materiale:	Rustfrit stål
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Barometer:	Ja
Højdemåler:	Ja
Termometer:	Ja
Timer:	1/1min - 24h
Batterilevetid:	3 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR2016
Antal understøttede batterier:	1
Alarmfunktion:	Ja
Vandbestandig dybde:	100 m
Nøjagtighed:	±30 sek/md
Verdenstid funktkon:	Ja