Casio SGW-600H-1BER Manual

Casio Ur SGW-600H-1BER

Læs nedenfor 📖 manual på dansk for Casio SGW-600H-1BER (8 sider) i kategorien Ur. Denne guide var nyttig for 37 personer og blev bedømt med 3.9 stjerner i gennemsnit af 19 brugere

Download PDF

Side 1/8

Operation Guide 3451

E-9

Stopwatch Mode World Time Mode

Countdown Timer Mode Alarm Mode

E-8

General Guide

• The illustration below shows which buttons you need to press to navigate between

modes.

• In any mode (except when a setting screen is on the display), press

B to illuminate

the display.

• You can enter the Digital Compass/Thermometer Mode from the Timekeeping Mode

by pressing D. To enter from another mode, first use C to enter the Timekeeping

Mode, and then press D.

Press C.

Timekeeping Mode

Digital Compass/

Thermometer Mode

Press D.Press C.

E-7

To do this: Enter this mode: See:

Use the countdown timer Countdown Timer

Mode E-52

Set an alarm time Alarm Mode E-55

* Coordinated Universal Time (UTC) is the global time standard used to regulate time.

E-6

Mode Reference Guide

Your watch has 6 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time and date in your Home City and the

current time in the Local Time City

• Configure the Daylight Saving Time (DST) settings of your

Home City and Local Time City

• Configure the time and date settings of your Home City

and the time setting of the Local Time City

Timekeeping Mode E-10

• Determine north and the bearing to a destination

• Determine the temperature at your current location

Digital Compass/

Thermometer Mode E-23

• View the current time in one of 48 cities (31 time zones)

and UTC* time

• Simultaneously view the current time in your World Time

City, Home City, and Local Time City.

World Time Mode E-47

Use the stopwatch to measure elapsed time Stopwatch Mode E-50

E-5

Alarms ……………………………………………………………………………………E-55

To set an alarm time ……………………………………………………………E-56

To test the alarm ………………………………………………………………E-57

To turn an alarm and the hourly time signal on and off ……………………E-58

Illumination ……………………………………………………………………………E-59

To turn on illumination …………………………………………………………E-60

To change the illumination duration …………………………………………E-60

Reference ………………………………………………………………………………E-62

To turn the button operation tone on and off …………………………………E-63

Specifications …………………………………………………………………………E-67

E-4

To perform magnetic declination correction …………………………………E-37

To take a temperature reading ………………………………………………E-42

To calibrate the temperature sensor …………………………………………E-45

To specify the temperature display unit ………………………………………E-46

World Time ………………………………………………………………………………E-47

To view the time in another city ………………………………………………E-48

To toggle a city code time between Standard Time and

Daylight Saving Time ………………………………………………………E-48

To swap your World Time City and Local Time City ………………………E-49

Stopwatch ………………………………………………………………………………E-50

To measure times with the stopwatch ………………………………………E-51

Countdown Timer………………………………………………………………………E-52

To configure countdown start time and auto-repeat settings ………………E-53

To use the countdown timer ……………………………………………………E-54

E-3

Contents

Mode Reference Guide ……………………………………………………………… E-6

General Guide ………………………………………………………………………… E-8

Timekeeping ……………………………………………………………………………E-10

To set your Home City time and date …………………………………………E-12

To toggle the Timekeeping Mode time between DST and

Standard Time ………………………………………………………………E-16

To specify the Local Time City…………………………………………………E-18

To toggle a Local Time City time between Standard Time and

Daylight Saving Time ………………………………………………………E-19

To swap your Home City and Local Time City ………………………………E-20

Digital Compass/Thermometer ……………………………………………………E-23

To enter and exit the Digital Compass/Thermometer Mode ………………E-24

To take a direction reading ……………………………………………………E-27

To calibrate the bearing sensor ………………………………………………E-35

E-2

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

E-1

ENGLISH

Warning!

• The measurement functions built into this watch are not intended for use in

taking measurements that require professional or industrial precision. Values

produced by this watch should be considered as reasonably accurate

representations only.

• When engaging in mountain climbing or other activities in which losing your

way can create a dangerous or life-threatening situation, always be sure to use

a second compass to confirm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of

your watch or its malfunction.

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

Applications

The built-in sensors of this watch measure direction and temperature. Measured

values are then shown on the display. Such features make this watch useful when

hiking, mountain climbing, or when engaging in other such outdoor activities.

Operation Guide 3451

E-19

To toggle a Local Time City time between Standard Time and Daylight Saving Time

1. In the Timekeeping Mode, hold down A for about four seconds until the time zone

of the currently selected Local Time City starts to flash on the world map. This is the

setting screen.

• Note that the Home City time zone will flash on the world map about two seconds

after you hold down A. Keep A depressed for about four seconds until the

Local Time zone flashes.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (

ON displayed) and Standard

Time (OFF displayed).

• Note that you cannot switch between Standard Time and Daylight Saving Time

(DST) while is selected as your Local Time City.UTC

4. Press A to exit the setting screen.

• The indicator will be in the upper left corner of the display while Daylight DST

Saving Time is enabled.

E-18

To specify the Local Time City

1. In the Timekeeping Mode, hold down A for about four

seconds until the time zone of the currently selected

Local Time City starts to flash on the world map. This is

the setting screen.

• Note that the Home City time zone will flash on the

world map about two seconds after you hold down

A. Keep A depressed for about four seconds until

the Local Time zone flashes.

2. Use D and B to scroll through city codes in the lower

display until the one you want is displayed.

• For full information on city codes, see the “City Code

Table” at the back of this manual.

• The time zone that is highlighted in the world map

will change in accordance with the Local Time City

code you select.

3. Press A to exit the setting screen.

Local Time City

Hour : Minutes

Map

Local Time City code

E-17

3. Press D to toggle between Daylight Saving Time (

ON displayed) and Standard

Time (OFF displayed).

• Note that you cannot switch between Standard Time and Daylight Saving Time

(DST) while is selected as your Home City.UTC

4. Press A to exit the setting screen.

• The DST indicator will be in the lower left corner of the display while Daylight

Saving Time is enabled.

Local Time

Local Time lets you separately display the current time in a specific time zone (Local

Time City). This feature is very handy for business professionals and others who need

to keep track of the current time in multiple time zones. A simple operation swaps your

Home City and Local Time City, which is great for travel between time zones.

E-16

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A for about two

seconds until the time zone of the currently selected

Home City starts to flash on the world map. This is the

setting screen.

• Release A immediately after the Home City code

appears. Keeping it depressed longer (about four

seconds) will switch to the Local Time City setting

screen.

2. Press C once to display the DST setting screen.

On/Off status

DST indicator

E-15

Screen To do this: Do this:

Change the year

Use D (+) and B (–).

Change the month or day

• For details about the above settings, see “Timekeeping” (page E-66).

5. Press A to exit the setting screen.

• For details about other settings, refer to the sections below.

– Button Operation Tone: “To turn the button operation tone on and off” (page E-63)

– Illumination Duration: “To change the illumination duration” (page E-60)

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

E-14

4. When the timekeeping setting you want to change is flashing, use

D and/or B to

change it as described below.

Screen To do this: Do this:

Change the city code Use D

(east) and B

(west).

Toggle between Daylight Saving Time

(ON) and Standard Time (

OFF). Press D.

Toggle between 12-hour (

12H) and

24-hour (24H) timekeeping. Press D.

Reset the seconds to

00 Press D.

Change the hour or minute Use

(+) and B (–).

E-13

2. Use D and B to scroll through city codes in the lower display until the one you

want is displayed.

• Make sure you select your Home City code before changing any other setting.

• For full information on city codes, see the “City Code Table” at the back of this

manual.

3. Press C to move the flashing in the sequence shown below to select the other

settings.

City Code DST 12/24-Hour

Format

Button Operation

Tone (page E-63)

Illumination Duration

(page E-60)

Second Hour

YearMonthDay

Minute

• After a city code is displayed, it will scroll once to show the full city name.

• The following steps explain how to configure timekeeping settings only.

E-12

Read This Before You Set the Time and Date!

This watch is preset with a number of city codes, each of which represents the time

zone where that city is located. When setting the time, it is important that you first

select the correct city code for your Home City (the city where you normally use the

watch). If your location is not included in the preset city codes, select the preset city

code that is in the same time zone as your location.

• Note that all of the times for the World Time Mode city codes (page E-48) and Local

Time city codes (page E-18) are displayed in accordance with the time and date

settings you configure in the Timekeeping Mode.

To set your Home City time and date

1. In the Timekeeping Mode, hold down A for about two seconds until the time zone

of the currently selected Home City starts to flash on the world map. This is the

setting screen.

• The Home City code will also appear on the display. Release

A immediately

after the Home City code appears. Keeping it depressed longer (about four

seconds) will switch to the Local Time City setting screen, which is indicated

when the Local Time City code is displayed.

E-11

You can adjust the Home Time city date and time in the

Timekeeping Mode. You also can simultaneously display

the current time in one other time zone, by specifying a

Local Time City.

• For information about selecting a Local Time City, see

“To specify the Local Time City” (page E-18).

Local Time City

Hour : Minutes

Map

Home City

Hour : Minutes, Seconds

Day of week, Month - Day

E-10

Timekeeping

This watch can keep track of the current time in up to three different time zones.

Home Time

• This is the time in the city where you normally use your watch (Home City). It is the

time displayed in the Timekeeping Mode.

Local Time

• This is the time in the city located in the time zone that is highlighted on the watch’s

world map (Local Time City).

World Time

• This is the time in the city you select in the World Time Mode (page E-47).

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	SGW-600H-1BER
Bredde:	45 mm
Dybde:	12.8 mm
Højde:	50.6 mm
Vægt:	46 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Urkassens materiale:	Aluminium,Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Elektronisk kompas:	Ja
Termometer:	Ja
Timer:	24t
Urtype:	Armbåndsur
Batterilevetid:	5 År
Batteritype:	CR2025
Antal understøttede batterier:	1
Urets glastype:	Resin
Alarmfunktion:	Ja
Se opkaldstype:	LCD-skive
Vandbestandigt tryk:	10 ATM
Vandbestandig dybde:	100 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rund
Hovedfarve på urskive:	Sort
Nøjagtighed:	±20 sek/md
Kalendertype:	Dag
Nedtællingsur:	Ja
Verdenstid funktkon:	Ja