Casio SPF-40-1VER Manual

Casio Ur SPF-40-1VER

Læs gratis den danske manual til Casio SPF-40-1VER (9 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Casio SPF-40-1VER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

2273-1

Module No. 2273

GETTING ACQUAINTED

Congratulations upon your selection of this CASIO watch. To get the most out

of your purchase, be sure to read this manual carefully and keep it on hand

for later reference when necessary.

Warning!

• The measurement functions built into this watch are not intended for

taking measurements that require professional or industrial precision.

Values produced by this watch should be considered as reasonable

representations only.

• When using this watch to take readings while boating or engaging in

any other activity during which losing your way can create a dangerous

or life-threatening situation, always be sure to use a second compass to

confirm direction readings.

• The longitude, lunitidal interval, Moon phase indicator, and tide graph

data that appears on the display of this watch is not intended for

navigation purposes. Always use proper instruments and resources to

obtain data for navigation purposes.

• This watch is not an instrument for calculating low tide and high tide

times. The Tide Graph of this watch is intended to provide a reasonable

approximation of tidal movements only.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,

or any claims by third parties that may arise through the use of this

watch.

About This Manual

• Button operations are indicated using the

letters shown in the illustration.

• Each section of this manual provides you

with the information you need to perform

operations in each mode. Further details

and technical information can be found in

the “REFERENCE” section.

(Light)

Press .D

Timekeeping Mode

Alarm Mode

Countdown Timer/Stopwatch Mode

Sensor Mode

Digital Compass Mode

Barometer/

Thermometer Mode

Moon/Tide Mode

▲

Press .B or C

Press .D

• Press B C to enter the Digital Compass Mode or to enter the Barometer/

Thermometer Mode from the Timekeeping Mode or Countdown Timer/

Stopwatch Mode. To get to a sensor mode from the Moon/Tide or Alarm

Mode, you must go to the Timekeeping Mode first.

▲

Press .B or C

Press .D

▲

Press . Press .B C

▲

GENERAL GUIDE

• If the digital display of your watch is continuously changing, see

“Auto Display Function” for information on how to stop it.

• The illustration below shows which buttons you need to press to navigate

between modes.

TIMEKEEPING

In addition to normal timekeeping, use the

Timekeeping Mode to set the current time and

date.

• The Moon phase indicator shows the

current Moon phase.

• The tide graph shows the current tidal

movements.

Important!

• The watch cannot produce correct Moon

phase or tide graph data unless the

Timekeeping Mode current time and date

settings, as well as city data settings (GMT

differential, longitudes, and lunitidal interval)

are all correct.

Hour : Minutes

PM indicator

Seconds

Year Month – Day

Day of week

Tide graph

Moon phase indicator

• Having the batteries replaced causes the Timekeeping Mode’s time/date

and city data settings to revert to their initial factory default settings. Use

the following procedure to set the current time and date, and to make city

data settings.

To reset the seconds count to zero

1. In the Timekeeping Mode, hold down until the second s digits start toA’

flash, which indicates the setting screen.

2. Press E to reset the seconds count to 00.

• Pressing E while the seconds count is in the range of 30 to 59 resets

the seconds to 00 and add 1 to the minutes. In the range of 00 to 29,

the minutes count is unchanged.

3. Press A twice to exit the setting screen.

2273-2

To set the time and date

1. In the Timekeeping Mode, hold down A

until the second’s digits start to flash, which

indicates the setting screen.

• While the second’s digits are flashing,

press E to reset the seconds count to

00.

2. Press D to move the flashing in the

sequence shown below to select other

settings.

Seconds Hour Minutes

Day Month Year

12/24-Hour

Format

3. While the hour, minutes, year, month, or day setting is flashing, use E (+)

and ( ) to change it.B–

• When the 12/24-hour setting is flashing, press E to toggle between

12-hour ( ) and 24-hour ( ) timekeeping.

4. Press A twice to exit the setting screen.

Configuring City Data Settings

The Moon phase and tide graph information displayed by this watch differ

according to your geographic location. Before using this watch to produce

such information, be sure to make the proper city data settings to specify your

current location.

• The lunitidal interval is the time elapsing between the Moon’s transit over

the meridian and the next high tide. See Lunitidal Interval for more“ ”

information.

• This watch displays lunitidal intervals in term of hours and minutes.

• GMT differential is the difference between the time in the displayed time

and Greenwich Mean Time (GMT).

To configure city data settings

1. In the Timekeeping Mode, hold down A

until the second’s digits starts to flash,

which indicates the setting screen.

2. Press A again to display the city data

setting screen, with the GMT differential

flashing.

• Press D to move the flashing in the

sequence shown below to select other

settings.

3. Use E (+) and B (–) to change the setting of the currently selected

(flashing) item.

• The “ ”CITY DATA LIST provides city data information for a number of

GMT differentials, longitudes, and lunitidal intervals around the world.

• You can change the GMT differential setting in units of 0.5 (half an

hour).

• ° °Longitude can be specified in the range of 179 W to 180 E, in 1-degree

steps.

4. Press A to exit the setting screen.

DIGITAL COMPASS

A built-in bearing sensor detects magnetic north and indicates one of 16

directions on the display. Direction readings are performed in the Digital

Compass Mode.

• You can calibrate the bearing sensor if you suspect the direction reading is

incorrect.

To enter and exit the Digital Compass Mode

While in the Timekeeping, Barometer/Thermometer, or Countdown Timer/

Stopwatch Mode, press to enter the Digital Compass Mode.B

• At this time, the watch immediately starts a Digital Compass operation.

After about two seconds, letters appear on the display to indicate the

direction that the 12 o clock position of the watch is pointing.’

• Press D to return to the Timekeeping Mode.

Longitude

GMT

Differential Hours Minutes

Lunitidal Interval

GMT Differential

To take a direction reading

1. Enter the Digital Compass Mode.

2. Place the watch on a flat surface or (if you

are wearing the watch) make sure that your

wrist is horizontal (in relation to the

horizon).

3. Point the 12 o’clock position of the watch in

the direction you want to determine.

4. Press B to start a Digital Compass

reading operation.

• After about two seconds, the direction

that the 12 o clock position of the watch’

is pointing appears on the display.

• Also, four pointers appear to indicate

magnetic north, south, east, and west.

• Direction reading continues for the

amount of time that is currently

specified for the continuous reading

time.

• The COMP indicator flashes on the

display while a reading is in progress.

• The direction value that appears on the

display represents the clockwise angle

formed between magnetic north (which

is 0 degrees) and the displayed

direction.

12 o clock position’

Magnetic

North Pointer

Direction

Direction value (in degrees)

NW 0°

WNW

WSW

SSW

SSE

ESE

ENE

NNE

NNW

Timekeeping Mode time

Direction bezel

Note

• Note that taking a measurement while the watch is not horizontal (in

relation to the horizon) can result in large measurement error.

• Pressing B while in the Digital Compass Mode starts a new direction

measurement operation.

• The following table shows the meanings of each of the direction

abbreviations that appear on the display.

• You can adjust the rotary direction bezel so

that the “ ” “ ” (or N ) is aligned with the

magnetic north pointer. This correctly aligns

all of the markings on the bezel.

• The Digital Compass operation is

momentarily interrupted while an alarm

(Daily Alarm or Hourly Time Signal) or beep

(progress or time up beeper) is sounding, or

while the backlight is turned on by the Auto

Light Switch. If this happens, start the

Digital Compass operation again from the

beginning.

• See “ ”Digital Compass Precautions for other

important information about taking direction

readings.

Making Digital Compass Settings

You can set up the watch so it takes continuous direction readings for an

amount of time specified by you.

To configure the Digital Compass Mode

1. In the Digital Compass Mode, hold down

A until the upper display area shows

, which indicates the setting screen.

2. Press D twice to display the continuous

reading time setting screen.

3. While the continuous reading time digits

are selected (flashing), use E

(+) and

(–) to change the setting in increments of

10 seconds.

• You can specify a continuous reading

time in the range of 0'00'' to 1'00''.

Setting 0'00'' causes digital compass

operation to stop after a single reading.

4. Press A to exit the setting screen.

Direction

Meaning

Direction

Meaning

Direction

Meaning

Direction

Meaning

North-

northeast

East-

southeast

South-

southwest

West-

northwest

Northeast

Southeast

Southwest

Northwest

East-

northeast

South-

southeast

West-

southwest

North-

northwest

North

East

South

West

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	SPF-40-1VER
Bredde:	53.8 mm
Dybde:	17.9 mm
Højde:	57 mm
Vægt:	74 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Kalender:	Ja
Elektronisk kompas:	Ja
Barometer:	Ja
Termometer:	Ja
Urtype:	Armbåndsur
Batterilevetid:	1.5 År
Batteritype:	SR927W
Antal understøttede batterier:	4
Alarmfunktion:	Ja
Produktdesign:	Sport
Mekanismetype:	Kvarts
Se opkaldstype:	Analog & LCD-opkald
Vandbestandig dybde:	100 m
Husets farve:	Blå
Båndets hovedfarve:	Blå
Etui form:	Rund
Hovedfarve på urskive:	Blå
Køn:	Unisex
Nøjagtighed:	15 sek/md
Kalendertype:	Månefase
Se markørstil:	Arabisk nummervisning