Casio WS-1100H-1AVEF Manual

Casio Ur WS-1100H-1AVEF

Læs gratis den danske manual til Casio WS-1100H-1AVEF (8 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Casio WS-1100H-1AVEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Operation Guide 3473/3474

E-9

Countdown Timer Mode Alarm Mode

C C

Dual Time Mode

E-8

General Guide

x Press C to change from mode to mode.

In any mode (except when a setting screen is on the display), press B to illuminate

the face of the watch.

Timekeeping Mode Moon/Tide Data Mode Stopwatch Mode

C C C

E-7E-6

Illumination ....................................................................................................... E-40

To illuminate the display ............................................................................... E-40

To specify the illumination duration .............................................................. E-41

Reference ......................................................................................................... E-42

To turn the button operation tone on and off ................................................ E-46

Specifications ................................................................................................... E-49

Operating Precautions ..................................................................................... E-52

User Maintenance ............................................................................................ E-62

E-5

Stopwatch .........................................................................................................E-24

To measure times with the stopwatch .......................................................... E-25

Countdown Timer............................................................................................. E-26

To use the countdown timer ......................................................................... E-27

To set up the countdown timer ..................................................................... E-28

Alarms ............................................................................................................... E-30

To set an alarm time ..................................................................................... E-32

To test the alarm ........................................................................................... E-34

To turn Alarms 2 and 3, and the Hourly Time Signal on and off.................... E-35

To select the operation of Alarm 1 ................................................................ E-36

Dual Time ..........................................................................................................E-37

To set the Dual Time ..................................................................................... E-38

E-4

Contents

Getting Acquainted ............................................................................................ E-1

General Guide ..................................................................................................... E-8

Timekeeping ..................................................................................................... E-10

To set the time and date ............................................................................... E-11

To toggle the Timekeeping Mode time between DST and Standard Time .... E-14

To configure Home Site data ........................................................................ E-17

To toggle between 12-hour and 24-hour timekeeping .................................. E-19

Moon/Tide Data ................................................................................................E-20

To view the current Moon/Tide Data Mode data .......................................... E-21

To specify a date .......................................................................................... E-23

E-3

Button operations are indicated using the letters shown in the illustration.

Note that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

To ensure that this watch provides you with the years of service for which it is

designed, be sure to carefully read and follow the instructions under “Operating

Precautions“ and “User Maintenance”.

E-2

About This Manual

The operational procedures for Modules 3473 and 3474 are identical. All of the

illustrations in this manual show Module 3473.

The module number is engraved on the back cover of the watch case.

Alarm on indicator

Hourly time

signal on

indicator

Alarm on indicator

Hourly time

signal on

indicator

Module 3473 Module 3474

E-1

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of

your purchase, be sure to read this manual carefully.

Be sure to keep all user documentation handy for future reference.

Warning!

The longitude, lunitidal interval, Moon phase indicator and tide graph data that

appear on the display of this watch are not intended for navigation purposes.

Always use proper instruments and resources to obtain data for navigation

purposes.

This watch is not an instrument for calculating low tide and high tide times. The

tide graph of this watch is intended to provide a reasonable approximation of

tidal movements only.

CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

Operation Guide 3473/3474

E-19

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D

24-hour timekeeping.

With the 12-hour format, the (PM) indicator appears to the left of the hour digits P

for times in the range of noon to 11:59 p.m. and the (AM) indicator appears to A

the left of the hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

The indicators are not displayed with the Timekeeping Mode time on the A and P

Countdown Timer Mode and Dual Time Mode screens.

E-18

4. When the setting you want to change is flashing, use and to change it as D B

described below.

Setting Screen Button Operations

UTC Differential

Use (+) and (–) to change the setting.D B

You can specify a value in the range of –12.0 to

+14.0, in 0.5-hour units.

Longitude Value

Use (+) and (–) to change the setting.D B

You can specify a value in the range of 0° to 180°,

in 1-degree units.

East Longitude/

West Longitude

Use to switch between east longitude ( ) and DE

west longitude ( ).W

Lunitidal Interval Hours,

Minutes Use (+) and (–) to change the setting.D B

When the DST setting is on, the UTC differential can be set in a range of –11.0

to +15.0 in 0.5-hour units.

5. Press to exit the setting screen.A

E-17

To configure Home Site data

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press again to display the UTC differential setting A

screen.

3. Press to move the flashing in the sequence shown C

below to select other settings.

UTC Differential East Longitude/

West Longitude

Longitude Value

Lunitidal Interval Minutes Lunitidal Interval Hours

UTC differential

E-16

The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch, and whenever you have the battery replaced. Change

these settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,

20 minutes)

E-15

Home Site Data

Moon phase, tide graph data, and Moon/Tide Data Mode data will not be displayed

properly unless Home Site data (UTC differential, longitude, and lunitidal interval) is

configured correctly.

The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the

Earth’s rotation.

The lunitidal interval is the time elapsing between the Moon’s transit over a

meridian and the next high tide at that meridian. See “Lunitidal Interval” (page

E-45) for more information.

This watch displays lunitidal intervals in terms of hours and minutes.

The “Site/Lunitidal Interval Data List” at the back of this manual provides UTC

differential and longitude information around the world.

E-14

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press once to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (DOn

displayed) and Standard Time ( displayed).OF

4. Press twice to exit the setting screen.A

The indicator appears on the Timekeeping, DST

Moon/Tide Data, and Alarm Mode screens to indicate

that Daylight Saving Time is turned on. In the case of

the Moon/Tide Data Mode, the indicator appears DST

on the tide data screen only.

DST indicator

On/Off status

E-13

4. Press twice to exit the setting screen.A

The first press of displays the UTC differential setting screen. Pressing A A

again exits the setting screen.

See “Daylight Saving Time (DST) Setting” below for details about the DST

setting.

The day of the week is displayed automatically in accordance with the date

(year, month, and day) settings.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-12

3. When the setting you want to change is flashing, use and to change it as B D

described below.

Screen To do this: Do this:

Reset the seconds to 00 Press D.

Toggle between Daylight Saving Time ( ) and On

Standard Time (OF)Press D.

Change the hour or minutes

Use (+) and (–).D B

Change the year

Change the month or day

E-11

To set the time and date

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press to move the flashing in the sequence shown C

below to select the other settings.

Seconds MinutesHourDST

Day YearMonth

C C

E-10

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

The Moon phase indicator (page E-42) shows the

current Moon phase in accordance with the current

date as kept in the Timekeeping Mode.

The tide graph (page E-44) shows tidal movements for

the current date in accordance with the current time as

kept in the Timekeeping Mode.

Important!

Be sure to configure the current time and date, and

your Home Site data (data for the site where you use

the watch) correctly before using the functions of this

watch. See “Home Site Data” (page E-15) for more

information.

PM indicator

Day of week

Month – Day

Tide graph

Moon phase indicator

Seconds

Hour : Minutes

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	WS-1100H-1AVEF
Bredde:	43 mm
Dybde:	13.3 mm
Højde:	46.3 mm
Vægt:	39 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
LED-baggrundsbelysning:	Ja
Urets glastype:	Akryl
Alarmfunktion:	Ja
Produktdesign:	Sport
Mekanismetype:	Kvarts
Se opkaldstype:	LCD-skive
Husets farve:	Sort, sølv
Båndets hovedfarve:	Sort
Etui form:	Rund
Hovedfarve på urskive:	Grå
Køn:	Hanstik
Antal tidszoner:	2
Tidzoner:	Ja
Stopurets nøjagtighed:	0.01 sek./side
Kalendertype:	Dag
Nedtællingsur:	Ja
Nedtællingstimer måleenheder:	Hour, Minute