CESYS C028149 Manual

CESYS Måleudstyr C028149

Læs gratis den danske manual til CESYS C028149 (2 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om CESYS C028149, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

2011!U S E R ‘ S I N S T R U C T I O N S!ART.-NR. C028149

The CESYS USB-ISOLATOR

breaks the electrical connection

between host PC and USB

device. Thus, cross currents

and mutual influences will be

inhibited.

For audio applications, this

process is called "ground lift";

in measuring and control

technology it is called "galvanic

isolation". The most frequent

cause of noise interferences

and inaccurate measurements

will be eliminated in this way.

Crystal clear sound.

Ground loops caused by USB

connections in recording

studios or at stage applications

will be prevented effectively.

An additional delay (latency

period) will not occur.

Precise measurement

results.

Without disturbing

interferences, more precise

results can be achieved in the

measurement technology.

Moreover, measurements will

become possible where the

signal to be measured has no

reference the to PC ground.

Safety and protection.

When controlling illumination

arrangements (e.g.

discotheque, stage), electrical

equipment or machines via

USB, the galvanic isolation will

provide protection against

damages on the host computer.

Clear sound and precise measurement

1. SET-UP MODE OF OPERATION

2. CONNECT USB DEVICE

3. CONNECT PC

U S B - I S O L ATO R

USB GALVANICALLY ISOLATED

Technical data

USB OPERATING MODES

FULL SPEED (12 MBIT/S)

LOW SPEED (1,5 MBIT/S)

ISOLATION

1 KV DC

OPERATING

TEMPERATURE

-40°C TO +70°C

DIMENSIONS

APPROX. 57 X 45 X 28 MM

FEATURES

USB 2.0 COMPATIBLE

NO DRIVERS REQUIRED

POWER-ON LED

ORDERING

INFORMATION

C028149 USB-ISOLATOR

Cesys Gesellschaft für angewandte Mikroelektronik mbH Zeppelinstrasse 6A D-91074 Herzogenaurach sales@cesys.com■ ■ ■

The CESYS USB-ISOLATOR

delivers almost the same

features as a USB cable.

Thus, no drivers have to be

installed and all operating

systems are supported (MAC,

Windows, Linux, embedded OS

and others).

The maximum permissible

cable length for USB

connections applies as well to

the USB-ISOLATOR.

The total length between PC

and device is relevant in that

case.

The galvanic isolation of the

supply voltage for the

connected USB device will

increase the power

consumption slightly compared

with direct connection without

USB-ISOLATOR.

In extreme cases (power

demanding USB device on

weak PC) additional use of a

USB-HUB with own power

adaptor (not supplied) may be

required between USB-

ISOLATOR and USB device or

host PC.

Prior to switching the mode of

operation (full speed/low

speed) all connections must be

completed. High-speed mode of

operation is not supported.

Release for medical equipment

is NOT available.

Information about delivery and

further details can be obtained

on the web site of the

manufacturer:

www.cesys.com

Produkt Specifikationer

Mærke:	CESYS
Kategori:	Måleudstyr
Model:	C028149

Har du brug for hjælp?

Hvis du har brug for hjælp til CESYS C028149 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr CESYS Manualer

CESYS C028152 Manual

18 August 2024

CESYS C028149 Manual

18 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025