Chauvet 4BAR Hex ILS Manual


Læs gratis den danske manual til Chauvet 4BAR Hex ILS (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Chauvet 4BAR Hex ILS, eller vil du spørge andre brugere om produktet?

Side 1/8
Quick Reference Guide
English EN
Español ES
Français FR
Deutsch DE
Italiano IT
Nederlands NL
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
4BAR Hex ILS QRG Rev. 1
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the 4BAR Hex ILS.
What is Included
Control Panel Description
ILS Connection
The 4BAR Hex ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting
System (ILS) ecosystem (patent pending). For more information about configuring the 4BAR Hex ILS into ILS mode,
please refer to the User Manual available at www.chauvetdj.com.
ALWAYS:
Connect to a grounded circuit.
Connect to operating voltages as specified on the product's spec sticker.
Disconnect from power before replacing the fuse.
Disconnect from its power source during periods of inactivity.
Use a safety cable when suspending overhead.
Heed all restrictions and warnings on the spec sticker.
Mount in a location with at least 20 in (50 cm) of ventilation.
Replace the fuse with the same type and rating.
Use a clamp with a captive bolt when a single hanging bracket is used.
Use Chauvet fluids.
Drain the tank before transporting or storing the product.
Keep the machine level.
Clean the machine after every use.
Clean around the product during and after use, as surfaces may become slippery.
Close both valves prior to filling with fluids.
In the event of a serious operating problem, stop using immediately.
DO NOT:
Open this product or attempt any repairs. It contains no user-serviceable parts.
Look at the light source when the product is on.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Touch the housing when it is on.
Block any ventilation holes/slots in the housing.
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Submerge.
Leave outdoors for extended periods of time.
Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation,
or shock.
Set this product on a flammable surface.
Keep this manual for future consultation. If transferring ownership of the product to another user,
ensure this document is kept with the laser.
4BAR Hex ILS
Power cable
Carrying bag
Tripod
Tripod carry bag
Wireless footswitch
Quick Reference Guide
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
glish


Produkt Specifikationer

Mærke: Chauvet
Kategori: Ikke kategoriseret
Model: 4BAR Hex ILS

Har du brug for hjælp?

Hvis du har brug for hjælp til Chauvet 4BAR Hex ILS stil et spørgsmål nedenfor, og andre brugere vil svare dig