Chauvin Arnoux CA 10141E Manual

Chauvin Arnoux Måleudstyr CA 10141E

Læs gratis den danske manual til Chauvin Arnoux CA 10141E (38 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Chauvin Arnoux CA 10141E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/38

Conductivity meter

EN - User’s manual

CA 10141E

Information or useful tip.

Battery.

The product is declared recyclable following an analysis of the life cycle in accordance with standard ISO 14040.

Chauvin Arnoux has adopted an Eco-Design approach in order to design this appliance. Analysis of the complete life-

cycle has enabled us to control and optimize the e󰀨ects of the product on the environment. In particular this appliance

exceeds regulation requirements with respect to recycling and reuse.

The CE marking indicates compliance with the European Low Voltage Directive (2014/35/EU), Electromagnetic

Compatibility Directive (2014/30/EU), and Restriction of Hazardous Substances Directive (RoHS, 2011/65/EU and

2015/863/EU)..

The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective disposal

in compliance with Directive WEEE 2012/19/EU. This equipment must not be treated as household waste.

PRECAUTIONS FOR USE

This instrument is compliant with safety standard IEC/EN 61010-2-030 or BS EN 61010-2-030, for voltages 5V with report to

ground. Failure to observe the safety instructions may result in electric shock, re, explosion, and destruction of the instrument

and of the installations.

■The operator and/or the responsible authority must carefully read and clearly understand the various precautions to be taken in

use. Sound knowledge and a keen awareness of electrical hazards are essential when using this instrument.

■Observe the conditions of use, namely the temperature, the relative humidity, the altitude, the degree of pollution, and the place

of use.

■Do not use the instrument if it seems to be damaged, incomplete, or poorly close.

■Before each use, check the condition of the housing. Any item of which the insulation is deteriorated (even partially) must be set

aside for repair or scrapping.

■All troubleshooting and metrological checks must be done by competent, accredited personnel.

Thank you for purchasing this CA 10141E conductivity meter.

For best results with your instrument:

■read these operating instructions carefully,

■comply with the precautions for use.

Produkt Specifikationer

Mærke:	Chauvin Arnoux
Kategori:	Måleudstyr
Model:	CA 10141E

Har du brug for hjælp?

Hvis du har brug for hjælp til Chauvin Arnoux CA 10141E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Chauvin Arnoux Manualer

Chauvin Arnoux C.A 6422 Manual

28 December 2024

Chauvin Arnoux Terca 3 C.A 6470N Manual

28 December 2024

Chauvin Arnoux C.A 1246 Manual

28 December 2024

Chauvin Arnoux MPC25 Manual

1 September 2024

Chauvin Arnoux MPC 25 Manual

1 September 2024

Chauvin Arnoux MiniFlex A196 Manual

1 September 2024

Chauvin Arnoux MiniFlex MA196 Manual

1 September 2024

Chauvin Arnoux MiniFlex MA193 Manual

1 September 2024

Chauvin Arnoux PAC93 Manual

1 September 2024

Chauvin Arnoux C193 Manual

1 September 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025