Chief MSS6364B Manual

Chief lave multimedier MSS6364B

Læs gratis den danske manual til Chief MSS6364B (2 sider) i kategorien lave multimedier. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Chief MSS6364B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

I N S T A L LA T I O N I N S T R U C T I O N S

Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918

8840-000094

4/08

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4

TIMES THE COMBINED WEIGHT OF ALL COMPONENTS

PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT

SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE

REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

MOUNT IS

125

POUNDS (

56.74

KG).

MSB-6364

FLAT PANEL DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

(1) Interface Bracket (4) Mounting Button – Tapped

(4) 10-24 x .5 Button Head Cap Screw (4) M6 x 35mm Phillips Head Screws

(4) M18 OD x 8.3 ID x 20 L Metric Nylon Spacer (4) M6 x 25mm Phillips Head Screws

(4) .75 OD x .266 ID x .375 L Nylon Spacer (1) 1/8 Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

DISPLAYS ARE EXTREMELY FRAGILE.

CAUTION!

Figure 1

WARNING!

NOTE: If installing screen on a Chief J-series wall mount, proceed

to Step 2 (J-Series VESA Interface Installation).

1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with

chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see

Figure 2 & Figure 3).

2. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display using the M6

screws (see Figure 4). For 32” and 37” screens use the longer spacer (20mm length) and M6 x 35mm screw

(see Figure 5). For 42” 46” and 52” screens use the .375” spacer and M6 x 25mm Screws (see Figure 6).

3. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets

with slots in the Chief Mount. Lower safety latch on the Chief Mount to secure your display, making sure latch

is completely engaged. If using a Chief J-series wall mount, use the M4 screws provided with the wall mount

to attach the wall mount to the interface plate.

Figure 2 Figure 3

Figure 4 Figure 5 (32” & 37” SCREENS)

Figure 6 (42”, 46” & 52” SCREENS)

Produkt Specifikationer

Mærke:	Chief
Kategori:	lave multimedier
Model:	MSS6364B

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief MSS6364B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

lave multimedier Chief Manualer

28 December 2024

27 December 2024

21 August 2024

21 August 2024

Chief MFM6000B Manual

20 August 2024

Chief LVM3X1UP Manual

20 August 2024

Chief PFQ2000B Manual

19 August 2024

Chief PFCUS + PAC700 Manual

19 August 2024

Chief MFMUS Manual

19 August 2024

Chief LVM3X2U Manual

18 August 2024

lave multimedier Manualer

Nyeste lave multimedier Manualer

Atdec AF-AN-B Manual

28 December 2024

Peerless-AV ACC-BPR Manual

22 December 2024

Peerless-AV ACC-GS1 Manual

22 December 2024

Peerless-AV ACC-MSF-W Manual

22 December 2024

NewStar MED-M100 Manual

14 September 2024

NewStar MED-M150 Manual

14 September 2024

Dataflex ViewMate 732 Manual

30 August 2024

Dataflex ViewMate 702 Manual

30 August 2024

Dataflex ViewMate 712 Manual

30 August 2024

Dataflex ViewMate 722 Manual

30 August 2024