Chief RPA293 Manual

Chief Flad panel støtte RPA293

Læs gratis den danske manual til Chief RPA293 (8 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Chief RPA293, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

I N S T A L L A T I O N I N S T R U C T I O N S

Projector Mount

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

RPA Series

RPA Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the RPA does not exceed 50 lbs

(22.7 kg).

• The weight capacity of the RPA may be LIMITED to the

lowest weight capacity of any other components

located between the RPA and the supporting structure!

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

IMPORTANT ! : The RPA mounts are designed to be:

• mounted to a 1-1/2" NPT or NPSM following ANSI/

ASME B1.20.1 (Schedule 40, 0.154" minimum

thickness steel or aluminum - ASTM B221) threaded

extension column (not included); or

• mounted to a double 2" x 4" wood joist with a maximum

drywall covering of 5/8"; or

• suspended from four 1/4-20 Grade ASTM A307 or

better threaded rods (not included) which are secured

to unistrut by 1/4-20 Grade 2 or better channel nuts (not

included), or to angle or channel assembly overhead

structural members (trusses or I-beams) by 1/4-20

Grade 2 or better jam nuts (not included).

NOTE: RPA Series may be used with Listed Chief models

WM110S, WM120S, WM130S, WM210S, WM220S,

WM230S, WM240S, WM210SI, WM220SI, WM230SI,

WM240SI, CMA151, and LSB100 (not included).

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

5.02

4.38

1.75

1 ½" NPT

5.50

3.25

4.50

5.50

3.75

BOLT CIRCLE

2.25

2.75

3.50

1.25

.75

ACCESS HOLE

STUDS ON SLB CENTER

IN THESE SLOTS

2.77

3.10

NOTE: CUSTOM INTERFACE BRACKET

NOT SHOWN. THE CUSTOM INTERFACE

BRACKET NEEDED FOR YOUR PROJECTOR

WILL ADD DEPTH TO INTALLATION AND

WILL AFFECT LOCATION OF PROJECTOR

ON MOUNT.

SEE SLB-XXXX DRAWING ALSO.

DIMENSIONS: INCHES

Produkt Specifikationer

Mærke:	Chief
Kategori:	Flad panel støtte
Model:	RPA293

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief RPA293 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flad panel støtte Chief Manualer

Chief MWCU Manual

3 April 2025

Chief KITXWXSM1U Manual

3 April 2025

3 April 2025

2 April 2025

9 Marts 2025

30 Januar 2025

30 Januar 2025

15 Januar 2025

15 Januar 2025

Chief TILD1X5NE1-M Manual

15 Januar 2025

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Anywhere Cart AC-GO-16 Manual

2 April 2025

Proaim P-DMC Manual

2 April 2025

Proaim CT-VNGD-CS Manual

2 April 2025

Mount-It! MI-7919 Manual

2 April 2025

Mount-It! MI-384 Manual

2 April 2025

Proaim CT-VNGD-UC5 Manual

2 April 2025

Premier Mounts 7170-0977 Manual

2 April 2025

Mount-It! MI-766 Manual

2 April 2025

Erard FLAK 800+ Manual

2 April 2025

Metronic 451060 Manual

28 Marts 2025