Mount-It! MI-384 Manual

Mount-It! Flad panel støtte MI-384

Læs gratis den danske manual til Mount-It! MI-384 (16 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Mount-It! MI-384, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

DQATL1

DQ Atlas TV wall mount

17.6-55lbs

42”-65”

8-25 kg

600 x 500

100 x 100

VESA

COMPLIANT

For installation assistance or questions, please contact us

at support@mount-it.com or (855) 925 5668.

MI-384

INSTALLATION INSTRUCTIONS

Height Adjustable Fireplace TV Mount

The maximum temperature at the front of the fireplace mantle should never be more

than 100°F (37.8°C).

The fireplace mantle should not extend more than 12”(304mm) from the mounting

surface.

This mount can support displays weighing between 17.6~55lbs(8~25kg).

The mounting surface should be a wood stud frame wall with studs spaced no more

than 24”(609mm) apart ; The wall must notexceed 5/8”(16mm) thick.

Ensure that the mounting surface is capable of supporting the combined weight of

the mount and any mounted display.

This mount should only be installed by persons with a basic knowledge of building

construction and installations.

This bracket should only be installed by two people. Do not attempt to install it by

yourself.

If mounting to a wall of wood stud construction, ensure that mounting bolts are

anchored in the center of the studs. When installing the TV mount on a concrete

wall, the wall must be at least 8.0" (203mm) thick with a minimum compressive

strength from 2500 to 3000 psi (17.2 to 20.7 Mpa) and must meet the ASTM C39

specification. When installing the TV mount on a cinder block wall, the cinder blocks

must meet the ASTM C216 specifications and have a minimum nominal width of 8.0"

(203mm). Be sure to mount it in a solid part of the block, generally 1" (25mm)

minimum from the side of the block. Do not drill into mortar joints! If plaster/dry

wall is thicker than 5/8" (16mm), custom fasteners must be supplied by the installer.

Note that hardware and instructions are pr

ovided for installation to wood stud

walls only.

Produkt Specifikationer

Mærke:	Mount-It!
Kategori:	Flad panel støtte
Model:	MI-384

Har du brug for hjælp?

Hvis du har brug for hjælp til Mount-It! MI-384 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flad panel støtte Mount-It! Manualer

Mount-It! MI-7919 Manual

2 April 2025

Mount-It! MI-384 Manual

2 April 2025

Mount-It! MI-766 Manual

2 April 2025

Mount-It! MI-14009 Manual

4 September 2024

Mount-It! MI-394 Manual

4 September 2024

Mount-It! MI-14010 Manual

4 September 2024

Mount-It! MI-2752 Manual

4 September 2024

Mount-It! MI-20810 Manual

4 September 2024

Mount-It! MI-2753 Manual

4 September 2024

Mount-It! MI-2758 Manual

4 September 2024

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Chief MWCU Manual

3 April 2025

Chief KITXWXSM1U Manual

3 April 2025

Chief RLXT3 Manual

3 April 2025

Anywhere Cart AC-GO-16 Manual

2 April 2025

Proaim P-DMC Manual

2 April 2025

Proaim CT-VNGD-CS Manual

2 April 2025

Proaim CT-VNGD-UC5 Manual

2 April 2025

Premier Mounts 7170-0977 Manual

2 April 2025

Erard FLAK 800+ Manual

2 April 2025

Chief LPE1U Manual

2 April 2025