Chief TIL1X2PH Manual

Chief Flad panel støtte TIL1X2PH

Læs gratis den danske manual til Chief TIL1X2PH (24 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Chief TIL1X2PH, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
I N S T A L L A T I O N I N S T R U C T I O N S
TILVAB1 Accessory
TIL1X2PH
TIL1X3PH
TIL1X4PH
TIL1X5PH
PH Series LED Wall Mounts / Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
TIL1X2PH / TIL1X3PH / TIL1X4PH / TIL1X5PH /
TILVAB1
TIL1X2PH / TIL1X3PH / TIL1X4PH / TIL1X5PH / TILVAB1 Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system. The wall to which the
mounting system is being attached may have a maximum
drywall thickness of 5/8” (1.6cm).
WARNING:
The TIL1X2PH / TIL1X3PH / TIL1X4PH /
TIL1X5PH LED wall mounts are designed for use with LED
panels only. Exceeding the weight capacity (listed) can result
in serious personal injury or damage to equipment!
• TIL1X2PH: 40 lbs (18.1 kg) - 20 lbs (9.1 kg) per
screen;
• TIL1X3PH: 60 lbs (27.2 kg) - 20 lbs (9.1 kg) per
screen;
• TIL1X4PH: 80 lbs (36.3 kg) - 20 lbs (9.1 kg) per
screen;
• TIL1X5PH: 100 lbs (45.4 kg) - 20 lbs (9.1 kg) per
screen.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
IMPORTANT ! : The TIL1X2PH / TIL1X3PH /TIL1X4PH
/
TIL1X5PH
LED wall mounts are designed to be mounted to:
• a bare 8" concrete or 8"x8"x16" concrete block wall; or
• a 3/4" thickness plywood-backed, 2" x 4" wood studs
(16" on center minimum) wall with a maximum drywall
thickness of 5/8"; or
• a 3/4" thickness plywood-backed, steel stud wall
covered with drywall having a maximum thickness of
5/8".
--SAVE THESE INSTRUCTIONS--

Produkt Specifikationer

Mærke: Chief
Kategori: Flad panel støtte
Model: TIL1X2PH

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief TIL1X2PH stil et spørgsmål nedenfor, og andre brugere vil svare dig


Flad panel støtte Chief Manualer

Chief

Chief TS318TU Manual

30 Januar 2025
Chief

Chief TS318SU Manual

30 Januar 2025
Chief

Chief PWCU Manual

15 Januar 2025
Chief

Chief MIWRFUB Manual

15 Januar 2025
Chief

Chief TILD1X5NE1-M Manual

15 Januar 2025
Chief

Chief MWRIWUB Manual

15 Januar 2025
Chief

Chief TILD1X4NE1-R Manual

15 Januar 2025
Chief

Chief TILD1X3NE1-L Manual

15 Januar 2025
Chief

Chief TILD1X3NE1-R Manual

15 Januar 2025
Chief

Chief KPP110B Manual

15 Januar 2025

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Ateca

Ateca VARIATION00376 Manual

26 Februar 2025
Ateca

Ateca SILHOUETTE00383 Manual

26 Februar 2025
Ateca

Ateca ELLIPSE00381 Manual

26 Februar 2025
Ateca

Ateca SILHOUETTE00384 Manual

26 Februar 2025
Ateca

Ateca CRESCENDO00388 Manual

26 Februar 2025
Ateca

Ateca AT247BA Manual

26 Februar 2025
Ateca

Ateca LEDE00224 Manual

26 Februar 2025
Ateca

Ateca UNIQUE00335 Manual

26 Februar 2025
Ateca

Ateca LEGEND00176 Manual

26 Februar 2025
Ateca

Ateca LUXE00281 Manual

26 Februar 2025